OSRAM PrevaLED® COIN 111 Technical Information Benefits Fits in most existing R111 traditinoal luminaires Easy & fast design-in for luminaire manufacturers Narrow beam angles, 24o and 40o High lumen output for HID lamp replacement Flexibility through 3 lumen packages and 2 CCTs Applications For Spot & Track-light in: Chain stores, Retail shops Shopping malls Exhibition halls Museums Technical Operating Data Product Nominal Nominal Radiance Color If [mA] Power Angle [°] Temp. [K] [W] Nominal Flux [lm] Lum. Intensity [cd] Typ. CRI [Ra] Efficacy [lm/W] PL-CN111-1200-930-24D-G1 700 18 24 3000 1230 5040 92 68 PL-CN111-1200-940-24D-G1 700 18 24 4000 1300 5325 92 72 PL-CN111-1200-930-40D-G1 700 18 40 3000 1230 2335 92 68 PL-CN111-1200-940-40D-G1 700 18 40 4000 1300 2465 92 72 PL-CN111-1800-830-24D-G1 700 22.5 24 3000 1880 7705 83 84 PL-CN111-1800-840-24D-G1 700 22.5 24 4000 1990 8155 83 88 PL-CN111-1800-830-40D-G1 700 22.5 40 3000 1880 3570 83 84 PL-CN111-1800-840-40D-G1 700 22.5 40 4000 1990 3780 83 88 PL-CN111-2700-830-24D-G1 1050 33.8 24 3000 2740 11230 83 81 PL-CN111-2700-840-24D-G1 1050 33.8 24 4000 2900 11885 83 86 PL-CN111-2700-830-40D-G1 1050 33.8 40 3000 2740 5200 83 81 PL-CN111-2700-840-40D-G1 1050 33.8 40 4000 2900 5505 83 86 All Data are related to the entire module Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data Technical Features Module ready to use with two cables: Color tolerance: <MacAdam 4 SDCM - red cable (+ pole) tp temperature of 70oC (see IEC/PAS 62717) - black cable (- pole) Max. tc temperature of 85oC (see IEC/PAS 62717) Cable length 500 mm, cable Ø 1.6 mm/AWG 22 L70B50 >= 50,000 hours at tp=70oC Color Rendering index CRI (Ra) typ. 92 for PLCN111-1200 and typ. 83 for PL-CN111-1800 & PLCN111-2700 Best efficacy in combination with OSRAM OPTOTRONIC® constant current control gears Modul efficacy up to 88 lm/W PrevaLED® COIN 50 – 18.08.2013 Page 1 OSRAM Minimum and Maximum Ratings Product Operating Temperature Storage Temperature Max. Current At tc-Point [C°]* [C°]* [mA]* PL-CN111-1200-930-24D-G1 -20 … 85 -40 … 80 735 PL-CN111-1200-940-24D-G1 -20 … 85 -40 … 80 735 PL-CN111-1200-930-40D-G1 -20 … 85 -40 … 80 735 PL-CN111-1200-940-40D-G1 -20 … 85 -40 … 80 735 PL-CN111-1800-830-24D-G1 -20 … 85 -40 … 80 735 PL-CN111-1800-840-24D-G1 -20 … 85 -40 … 80 735 PL-CN111-1800-830-40D-G1 -20 … 85 -40 … 80 735 PL-CN111-1800-840-40D-G1 -20 … 85 -40 … 80 735 PL-CN111-2700-830-24D-G1 -20 … 85 -40 … 80 1100 PL-CN111-2700-840-24D-G1 -20 … 85 -40 … 80 1100 PL-CN111-2700-830-40D-G1 -20 … 85 -40 … 80 1100 PL-CN111-2700-840-40D-G1 -20 … 85 -40 … 80 1100 *) Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the LED Module. Exceeding maximum ratings for operating current will cause hazardous overload and will likely destroy the LED Module. The temperature of the LED module must be measured at the tc-point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label. For exact location of the tc-point see drawing below. Dimensions & Mechanical data M3x5mm Dimension (mm) Ø111 x 46 (H) Mounting AR111 similar Optics PC lens Weight 290 grams PrevaLED® COIN 50 – 18.08.2013 Page 2 OSRAM Standard Compliance Safety EN 62031, IEC 60598-1, UL 8750 EMC EN 55015, EN 61547 Eye Security EN 62471 Ingress Production Dry Location, IP 20 Environment RoHS Electrical Operating Conditions PrevaLED® COIN 50 – 18.08.2013 Page 3 OSRAM Safety Information The LED module itself and all its components must not be mechanically stressed. Assembly must not damage or destroy conducting paths on the circuit board. To avoid mechanical damage to the connecting cables, the module should be attached securely to the intended substrate. Heavy vibration should be avoided. In order to drive OSRAM LED-Modules safely, it is absolutely necessary to operate them with an electronically stabilised power supply protecting against short circuits, overload and overheating. To also ease the luminaire/installation approval, electronic control gear for LED or LED modules should carry the CE mark and be ENEC certified. The declarations of conformity must include the following standards: CE: EC 61347-2-13, EN 55015, IEC 61547 and IEC 61000-3-2 - ENEC: 61347-2-13 and IEC/EN 62384. Also check for the mark of an independent authorized certification institute. Please see the relevant brochure for more detailed information (see "Related and Further Information"). OSRAM OPTOTRONIC® electronic control gear complies to all relevant standards and guarantees safe operation. Installation of LED modules (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. Correct electrical polarity needs to be obsered. Wrong polarity will destory the module and will result in no light emission. Pay attention to standard ESD precautions when installing the module. The module, as manufactured, has no conformal coating and therefore offers no inherent protection against corrosion. Damage by corrosion will not be honored as a materials defect claim. It is the user's responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements. If the IP rating of the fixture should be higher than IP20, the design of the housing should be according to the IP standards in the application. Pay attention not to exceed the maximum operation temperature at tc point when the modules are used in enclosed environment. PrevaLED® COIN 50 – 18.08.2013 Page 4 OSRAM Ordering Guide Product Name Product Code Product Number (EAN10) Product Number (EAN40) Piece per box PrevaLED® COIN 111 PL-CN111-1200-930-24D-G1 4052899918191 4052899918313 12 PrevaLED® COIN 111 PL-CN111-1200-940-24D-G1 4052899918207 4052899918320 12 PrevaLED® COIN 111 PL-CN111-1200-930-40D-G1 4052899918214 4052899918337 12 PrevaLED® COIN 111 PL-CN111-1200-940-40D-G1 4052899918221 4052899918344 12 PrevaLED® COIN 111 PL-CN111-1800-830-24D-G1 4052899918238 4052899918351 12 PrevaLED® COIN 111 PL-CN111-1800-840-24D-G1 4052899918245 4052899918368 12 PrevaLED® COIN 111 PL-CN111-1800-830-40D-G1 4052899918252 4052899918375 12 PrevaLED® COIN 111 PL-CN111-1800-840-40D-G1 4052899918269 4052899918382 12 PrevaLED® COIN 111 PL-CN111-2700-830-24D-G1 4052899918276 4052899918399 12 PrevaLED® COIN 111 PL-CN111-2700-840-24D-G1 4052899918283 4052899918405 12 PrevaLED® COIN 111 PL-CN111-2700-830-40D-G1 4052899918290 4052899918412 12 PrevaLED® COIN 111 PL-CN111-2700-840-40D-G1 4052899918306 4052899918429 12 Sales and Technical Support OSRAM Asia Pacific 30th Floor, China Resource Building, 26 Harbour Road, Wanchai, Hong Kong Sales and technical support is given by the local OSRAM subsidiaries. Complete subsidiaries listing is available at OSRAM homepage. +852 3652 5678 www.osram.com PrevaLED® COIN 50 – 18.08.2013 Page 5 OSRAM Application Note OTi DALI 35/1A0 LT2 700 PL-CN111-1800 700 PL-CN111-2700 1050 OTe 25 CS Typ. PL-CN111-1200 OTe 35/1A0 CS PC OTe 25 PC PC Modules OTe 50 CS Dimming Drivers OTe 35/700 CS DALI OTe 35/700 PC DALI OTe 20/700 PC PC Current [mA] OTi DALI 25/700 LT2 Recommended OPTOTRONIC® devices B B A A A B A A A Connection Type Driver Availability Reference Connection Diagrams CAUTION The following diagrams are for reference only. Please refer to Instruction Sheet of power supply/ dimmer/ controller for details. Disconnected from mains supply before wiring work. Wrong polarity will destroy the module and result in no light emission. Type A: 1-to-1 connection L 220-240V ac N PrevaLED® COIN 50 – 18.08.2013 Constant Current Power Supply Page 6 + - OSRAM Type B: 1-to-1 connection with Phase Cut/ Trailing Edge dimming Phase Cut Dimmer L 220-240V ac N Phase cut dimmable * Constant Current Power Supply + - Remark: - 1pc OTe PC driver for 1pc PL-CN111 @700mA or 1050mA - Dimming by reduce output current * Trailing Edge dimmable OT shall work with trailing edge dimmer. Sales and technical support OSRAM GmbH Marcel-Breuer-Straße 6 80807 Munich, Germany www.osram.com +49.89.6213-0 (Headquarter) +49.89.6213-6000 (Customer-Service-Center) Sales and technical support is given by the local OSRAM subsidiaries. On the OSRAM website all subsidiaries are listed with complete address and phone numbers. Links and related further information OSRAM LED Systems OSRAM catalogue General information PrevaLED® COIN 50 – 18.08.2013 www.osram.com/prevaled catalog.osram.com www.osram.com Page 7