MPPC® (Multi-Pixel Photon Counter) arrays S13361-3050 series MPPC arrays in a chip size package miniaturized through the adoption of TSV structure The S13361-3050 series is a MPPC array for precision measurement miniaturized by the use of TSV (through-silicon via) and CSP (chip size package) technologies. The adoption of a TSV structure made it possible to eliminate wiring on the photosensitive area side, resulting in a compact structure with little dead space compared with previous products. The four-side buttable structure allows multiple devices to be arranged side by side to fabricate large-area devices. They are suitable for applications, such as medical, non-destructive inspection, environmental analysis, and high energy physics experiment, that require photon counting measurement. Features Applications Low crosstalk Astro physical application Low afterpulses High energy physics experiment Outstanding photon counting capability (outstanding photon detection efficiency versus numbers of incident photons) Nuclear medicine Compact chip size package with little dead space Environmental analysis PET Low voltage (VBR=53 V typ.) operation High gain: 105 to 106 Lower noise When an MPPC detects photons, the output may contain spurious pulses, namely afterpulse and crosstalk, that are separate from the output pulses of the incident photons. Afterpulses are output later than the timing at which the incident light is received. Crosstalk is output from other pixels at the same time as the detection of light. Previous products achieved lower afterpulse through the improvement of material and wafer process technology, but with the S13361-3050 series, low crosstalk has been achieved in addition to low afterpulse. Pulse waveform comparison (typical example) Previous product Improved product (reference data: S13360-3050VE) (M=1.25 × 106) 50 mV 50 mV (M=1.25 × 106) 10 ns 10 ns www.hamamatsu.com 1 MPPC (Multi-Pixel Photon Counter) arrays S13361-3050 series Structure Parameter Symbol S13361-3050NE-04 S13361-3050AE-04 Number of channels 16 (4 × 4) Effective photosensitive 3×3 area/channel Pixel pitch 50 Number of pixels 3584 Fill factor 74 Package type Surface mount With connector*1 Window Epoxy resin Refractive index of window material 1.55 S13361-3050NE-08 S13361-3050AE-08 64 (8 × 8) Unit - 3×3 mm 50 3584 74 μm % - Surface mount With connector*1 Epoxy resin 1.55 *1: A connector made by SAMTEC is mounted on the back side of the board. ST4-20-1.00-L-D-P-TR (S13361-3050NE/AE-04) ST4-40-1.00-L-D-P-TR (S13361-3050NE/AE-08) These connectors mate with a SAMTEC receptacle (SS4-20-3.00-L-D-K-TR or SS4-40-3.00-L-D-K-TR). See the following URL for detailed information. http://www.samtec.com/ftppub/pdf/ss4.pdf Absolute maximum ratings Parameter Operating temperature*2 Storage temperature*2 Reflow soldering conditions*3 Symbol Topr Tstg Tsol S13361-3050NE-04 S13361-3050AE-04 -20 to +60 -20 to +80 Peak temperature: 240 °C, twice (see P.9) S13361-3050NE-08 S13361-3050AE-08 -20 to +60 -20 to +80 Peak temperature: 240 °C, twice (see P.10) Unit °C °C - *2: No dew condensation When there is a temperature difference between a product and the surrounding area in high humidity environment, dew condensation may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability. *3: JEDEC level 5a Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. Electrical and optical characteristics (Typ. Ta=25 °C, Vover=3 V, unless otherwise noted) Parameter Symbol Spectral response range λ Peak sensitivity wavelength λp PDE Photon detection efficiency (λ=λp)*4 Typ. Dark count*5 Max. Terminal capacitance Ct Gain M Breakdown voltage VBR Recommended operating voltage Vop Typ. Vop variation between channels Max. Temperature coefficient of ΔTVop recommended operating voltage Value 320 to 900 450 40 0.5 1.5 320 1.7 × 106 53 ± 5 VBR + 3 ±0.05 ±0.15 54 Unit nm nm % Mcps pF V V V mV/°C *4: Photon detection efficiency does not include crosstalk or afterpulses. *5: Threshold=0.5 p.e. Note: The above characteristics were measured the operating voltage that yields the listed gain in this catalog. (See the data attached to each product.) 2 MPPC (Multi-Pixel Photon Counter) arrays S13361-3050 series Photon detection efficiency vs. wavelength (typical example) (Ta=25 °C) Photon detection efficiency (%) 50 40 30 20 10 0 200 300 400 500 600 700 800 900 1000 Wavelength (nm) KAPDB0318EA Photon detection efficiency does not include crosstalk or afterpulses. (Ta=25 °C) 6 × 106 Gain Crosstalk probability Photon detection efficiency (λ=450 nm) Gain 5 × 106 60 50 4 × 106 40 3 × 106 30 2 × 106 20 1 × 106 10 0 0 2 4 6 8 0 10 Crosstalk probability, photon detection efficiency (%) Overvoltage specifications of gain, crosstalk probability, photon detection efficiency (typical example) Overvoltage (V) KAPDB0324EA MPPC characteristics vary with the operating voltage. Although increasing the operating voltage improves the photon detection efficiency and time resolution, it also increases the dark count and crosstalk at the same time, so an optimum operating voltage must be selected to match the application. 3 MPPC (Multi-Pixel Photon Counter) arrays S13361-3050 series Dimensional outlines (unit: mm) S13361-3050NE-04 [Top view] 1.35 ± 0.20 C-1 D-1 A-2 B-2 C-2 D-2 A-3 B-3 C-3 D-3 A-4 B-4 C-4 D-4 13.0 Photosensitive area (16 ×) 3.0 × 3.0 0.1 ± 0.05 Photosensitive surface Resin 3 × 3.2 = (9.6) B-1 13.0 A-1 0.2 ± 0.05 3 × 3.2 = (9.6) A (D-1) 1.3 1.9 1.3 1.9 1.3 1.9 1.3 0.2 ± 0.05 0.2 ± 0.05 0.2 ± 0.05 [Bottom view] [Side view] A (C-1) K (D-1) A (D-2) K (B-1) K (C-1) A (B-1) K (C-2) A (B-2) K (C-3) A (B-3) K (C-4) A (B-4) A (C-2) K (D-2) A (D-3) A (D-4) K (A-2) A (A-2) K (B-3) A (C-4) K (D-4) Cathode (16 ×) ϕ0.7 A (A-1) K (B-2) A (C-3) K (D-3) K (A-1) K (A-3) A (A-3) K (B-4) K (A-4) A (A-4) Index mark 1.3 1.9 1.3 1.9 1.3 1.9 1.3 Anode (16 ×) ϕ0.7 Tolerance unless otherwise noted: ±0.1 A (X-Y): Anode pad of (X-Y) channel K (X-Y): Cathode pad of (X-Y) channel KAPDA0168EB 4 MPPC (Multi-Pixel Photon Counter) arrays S13361-3050 series S13361-3050AE-04 [Top view] 0.2 ± 0.05 0.2 ± 0.05 B-1 C-1 D-1 B-2 C-2 D-2 A-3 B-3 C-3 D-3 A-4 B-4 C-4 D-4 13.0 A-2 13.0 Photosensitive area (16 ×) 3.0 × 3.0 (3.08) 0.1 ± 0.05 Photosensitive surface (3 ×) Index mark Resin 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 3 × 3.2 = (9.6) A-1 1.35 ± 0.20 Connector (SAMTEC) ST4-20-1.00-L-D-P-TR 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 (9.4) 3 × 3.2 = (9.6) 0.2 ± 0.05 0.2 ± 0.05 [Bottom view] [Side view] (3.7) Tolerance unless otherwise noted: ±0.1 KAPDA0169EB Pin no. 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Connection K (C-1) K (D-1) NC A (C-1) A (D-1) A (D-2) A (C-2) NC K (D-2) K (C-2) K (C-3) K (D-3) NC A (C-3) A (D-3) A (D-4) A (C-4) NC K (D-4) K (C-4) Pin no. 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Connection K (B-1) K (A-1) NC A (B-1) A (A-1) A (A-2) A (B-2) NC K (A-2) K (B-2) K (B-3) K (A-3) NC A (B-3) A (A-3) A (A-4) A (B-4) NC K (A-4) K (B-4) Note: A=Anode, K=Cathode 5 MPPC (Multi-Pixel Photon Counter) arrays S13361-3050 series S13361-3050NE-08 [Top view] 0.2 ± 0.05 0.2 ± 0.05 [Bottom view] [Side view] 1.35 ± 0.2 0.1 ± 0.05 7.0 × 3.2 = (22.4) Anode Cathode (64 ×) ϕ0.7 (64 ×) ϕ0.7 E-1 F-1 G-1 H-1 A-2 B-2 C-2 D-2 E-2 F-2 G-2 H-2 A-3 B-3 C-3 D-3 E-3 F-3 G-3 H-3 A-4 B-4 C-4 D-4 E-4 F-4 G-4 H-4 A-5 B-5 C-5 D-5 E-5 F-5 G-5 H-5 A-6 B-6 C-6 D-6 E-6 F-6 G-6 H-6 A-7 B-7 C-7 D-7 E-7 F-7 G-7 H-7 A-8 B-8 C-8 D-8 E-8 F-8 G-8 H-8 3 4 5 6 7 8 9 10 1112 1314 1516 a b Photosensitive surface 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 D-1 0.2 ± 0.05 C-1 c d e f g h Resin i j 0.2 ± 0.05 B-1 7.0 × 3.2 = (22.4) 25.8 1 2 A-1 k l m n o p Index mark 25.8 Photosensitive area (64 ×) 3.0 × 3.0 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 Tolerance unless otherwise noted: ±0.1 KAPDA0170EB Pad no. a-1 b-2 c-1 d-2 e-1 f-2 g-1 h-2 i-1 j-2 k-1 l-2 m-1 n-2 o-1 p-2 Connection A (H-1) K (H-1) A (H-2) K (H-2) A (H-3) K (H-3) A (H-4) K (H-4) A (H-5) K (H-5) A (H-6) K (H-6) A (H-7) K (H-7) A (H-8) K (H-8) Pad no. a-3 b-4 c-3 d-4 e-3 f-4 g-3 h-4 i-3 j-4 k-3 l-4 m-3 n-4 o-3 p-4 Connection A (G-1) K (G-1) A (G-2) K (G-2) A (G-3) K (G-3) A (G-4) K (G-4) A (G-5) K (G-5) A (G-6) K (G-6) A (G-7) K (G-7) A (G-8) K (G-8) Pad no. b-5 a-6 d-5 c-6 f-5 e-6 h-5 g-6 j-5 i-6 l-5 k-6 n-5 m-6 p-5 o-6 Connection A (F-1) K (F-1) A (F-2) K (F-2) A (F-3) K (F-3) A (F-4) K (F-4) A (F-5) K (F-5) A (F-6) K (F-6) A (F-7) K (F-7) A (F-8) K (F-8) Pad no. b-7 a-8 d-7 c-8 f-7 e-8 h-7 g-8 j-7 i-8 l-7 k-8 n-7 m-8 p-7 o-8 Connection A (E-1) K (E-1) A (E-2) K (E-2) A (E-3) K (E-3) A (E-4) K (E-4) A (E-5) K (E-5) A (E-6) K (E-6) A (E-7) K (E-7) A (E-8) K (E-8) Pad no. a-9 b-10 c-9 d-10 e-9 f-10 g-9 h-10 i-9 j-10 k-9 l-10 m-9 n-10 o-9 p-10 Connection A (D-1) K (D-1) A (D-2) K (D-2) A (D-3) K (D-3) A (D-4) K (D-4) A (D-5) K (D-5) A (D-6) K (D-6) A (D-7) K (D-7) A (D-8) K (D-8) Pad no. a-11 b-12 c-11 d-12 e-11 f-12 g-11 h-12 i-11 j-12 k-11 l-12 m-11 n-12 o-11 p-12 Connection A (C-1) K (C-1) A (C-2) K (C-2) A (C-3) K (C-3) A (C-4) K (C-4) A (C-5) K (C-5) A (C-6) K (C-6) A (C-7) K (C-7) A (C-8) K (C-8) Pad no. b-13 a-14 d-13 c-14 f-13 e-14 h-13 g-14 j-13 i-14 l-13 k-14 n-13 m-14 p-13 o-14 Connection A (B-1) K (B-1) A (B-2) K (B-2) A (B-3) K (B-3) A (B-4) K (B-4) A (B-5) K (B-5) A (B-6) K (B-6) A (B-7) K (B-7) A (B-8) K (B-8) Pad no. b-15 a-16 d-15 c-16 f-15 e-16 h-15 g-16 j-15 i-16 l-15 k-16 n-15 m-16 p-15 o-16 Connection A (A-1) K (A-1) A (A-2) K (A-2) A (A-3) K (A-3) A (A-4) K (A-4) A (A-5) K (A-5) A (A-6) K (A-6) A (A-7) K (A-7) A (A-8) K (A-8) Note: A=Anode, K=Cathode 6 MPPC (Multi-Pixel Photon Counter) arrays S13361-3050 series S13361-3050AE-08 [Top view] 0.2 ± 0.05 0.2 ± 0.05 1.35 ± 0.2 (3.08) 0.1 ± 0.05 D-1 E-1 F-1 G-1 H-1 A-2 B-2 C-2 D-2 E-2 F-2 G-2 H-2 A-3 B-3 C-3 D-3 E-3 F-3 G-3 H-3 A-4 B-4 C-4 D-4 E-4 F-4 G-4 H-4 A-5 B-5 C-5 D-5 E-5 F-5 G-5 H-5 A-6 B-6 C-6 D-6 E-6 F-6 G-6 H-6 A-7 B-7 C-7 D-7 E-7 F-7 G-7 H-7 A-8 B-8 C-8 D-8 E-8 F-8 G-8 H-8 Photosensitive surface 40 41 40 41 1 80 1 80 Resin (17.58) C-1 0.2 ± 0.05 B-1 12.8 0.2 ± 0.05 A-1 7.0 × 3.2 = (22.4) 7.0 × 3.2 = (22.4) 25.8 [Bottom view] [Side view] Connector 1 25.8 (3 ×) Index mark Connector 2 (2 ×) connector (SAMTEC) ST4-40-1.00-L-D-P-TR Photosensitive area (64 ×) 3.0 × 3.0 Tolerance unless otherwise noted: ±0.1 KAPDA0171EB Pin no. 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Connector 1 Connection Pin no. K (G-1) 41 K (H-1) 42 NC 43 A (G-1) 44 A (H-1) 45 A (H-2) 46 A (G-2) 47 NC 48 K (H-2) 49 K (G-2) 50 K (G-3) 51 K (H-3) 52 NC 53 A (G-3) 54 A (H-3) 55 A (H-4) 56 A (G-4) 57 NC 58 K (H-4) 59 K (G-4) 60 K (G-5) 61 K (H-5) 62 NC 63 A (G-5) 64 A (H-5) 65 A (H-6) 66 A (G-6) 67 NC 68 K (H-6) 69 K (G-6) 70 K (G-7) 71 K (H-7) 72 NC 73 A (G-7) 74 A (H-7) 75 A (H-8) 76 A (G-8) 77 NC 78 K (H-8) 79 K (G-8) 80 Note: A=Anode, K=Cathode Connection K (F-1) K (E-1) NC A (F-1) A (E-1) A (E-2) A (F-2) NC K (E-2) K (F-2) K (F-3) K (E-3) NC A (F-3) A (E-3) A (E-4) A (F-4) NC K (E-4) K (F-4) K (F-5) K (E-5) NC A (F-5) A (E-5) A (E-6) A (F-6) NC K (E-6) K (F-6) K (F-7) K (E-7) NC A (F-7) A (E-7) A (E-8) A (F-8) NC K (E-8) K (F-8) Pin no. 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Connector 2 Connection Pin no. K (C-1) 41 K (D-1) 42 NC 43 A (C-1) 44 A (D-1) 45 A (D-2) 46 A (C-2) 47 NC 48 K (D-2) 49 K (C-2) 50 K (C-3) 51 K (D-3) 52 NC 53 A (C-3) 54 A (D-3) 55 A (D-4) 56 A (C-4) 57 NC 58 K (D-4) 59 K (C-4) 60 K (C-5) 61 K (D-5) 62 NC 63 A (C-5) 64 A (D-5) 65 A (D-6) 66 A (C-6) 67 NC 68 K (D-6) 69 K (C-6) 70 K (C-7) 71 K (D-7) 72 NC 73 A (C-7) 74 A (D-7) 75 A (D-8) 76 A (C-8) 77 NC 78 K (D-8) 79 K (C-8) 80 Connection K (B-1) K (A-1) NC A (B-1) A (A-1) A (A-2) A (B-2) NC K (A-2) K (B-2) K (B-3) K (A-3) NC A (B-3) A (A-3) A (A-4) A (B-4) NC K (A-4) K (B-4) K (B-5) K (A-5) NC A (B-5) A (A-5) A (A-6) A (B-6) NC K (A-6) K (B-6) K (B-7) K (A-7) NC A (B-7) A (A-7) A (A-8) A (B-8) NC K (A-8) K (B-8) 7 MPPC (Multi-Pixel Photon Counter) arrays S13361-3050 series Cross section detail (unit: mm) Gap between photosensitive areas 0.2 Resin Photosensitive surface 0.1 Package edge to photosensitive area 0.2 Chip Substrate Electrode Solder bump KAPDC0060EA Recommended land pattern (Unit: mm) S13361-3050NE-08 1.3 1.9 1.3 1.9 1.3 1.9 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.9 1.9 1.9 1.9 1.9 1.9 1.9 S13361-3050NE-04 1.3 1.9 1.3 1.9 1.3 1.9 1.3 (32 ×) ɸ0.7 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 KAPDC0061EA (128 ×) ɸ0.7 KAPDC0062EA 8 MPPC (Multi-Pixel Photon Counter) arrays S13361-3050 series Temperature profile measurement example using our experimental hot-air reflow oven (surface mount type) 300 °C 240 °C max. Temperature 220 °C 190 °C 170 °C Preheat 70 to 90 s Soldering 40 s max. Time KPICB0171EA ∙ This surface mount type package product supports lead-free soldering. After unpacking, store it in an environment at a temperature of 25 °C or less and a humidity of 60% or less, and perform soldering within 24 hours. ∙ The effect that the product is subject to during reflow soldering varies depending on the circuit board and reflow furnace that are used. Before actual reflow soldering, check for any problems by testing out the reflow soldering methods in advance. ∙ When three or more mounths have passed or if the packing bag has not been stored in an environment described above, perform baking. For the baking method, see the related information “Surface mount type products” precautions. Precautions ∙ If necessary, incorporate appropriate protective circuits in power supplies, devices, and measuring instruments to prevent overvoltage and overcurrent. 9 MPPC (Multi-Pixel Photon Counter) arrays S13361-3050 series Related products Power supply for MPPC C11204 series The C11204 series is a high voltage power supply that is optimized for driving MPPCs. Since it has a temperature compensation function, MPPCs can be driven stably even in environments subject to temperature changes. C11204-02 C11204-01 Power supplies for MPPC lineup Package type Temperature stability (ppm/°C) Voltage boost circuit MR (magnetic resonance) compatibility C11204-01 With leads ±10 Yes - C11204-02 Surface mount ±10 Yes - C11204-03 With leads ±10 - Yes C11204-04 Surface mount ±30 - Yes Type no. Features High precision Low ripple noise High precision Low ripple noise Compact: 11.5 x 11.5 mm MR compatible Low price MR compatible Low price Compact: 11.5 x 11.5 mm MPPC modules C13369 series The C13369 series is a photon counting module capable of detecting low light level. This module consists of a MPPC array, current-to-voltage converter circuit, high-voltage power supply circuit, and temperature-compensation circuit, etc. 10 MPPC (Multi-Pixel Photon Counter) arrays S13361-3050 series Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Disclaimer ∙ Metal, ceramic, plastic package products ∙ Surface mount type products Technical information ∙ MPPC MPPC is a registered trademark of Hamamatsu Photonics K.K. Information described in this material is current as of April, 2016. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741 China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No.KAPD1054E01 Apr. 2016 DN 11