MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Features Rev. V5 Functional Diagram (TOP VIEW) • • • • • • • • Exceptional Broadband Performance, 0.05 - 6.0 GHz Low Loss: TX = 0.33 dB @ 2010 MHz, 5V / 20mA Low Loss: TX = 0.38 dB @ 3.5 GHz, 5V / 20mA High Isolation: Rx = 44dB @ 2010 MHz, 20mA / 5V High Isolation: Rx = 36dB @ 3.5 GHz, 20mA / 5V High TX RF Input Power = 50 W C.W. @ 2010MHz High Tx RF Input Peak Power > 1000 W Suitable for Very High Power TD-SCDMA & WiMAX Applications • Surface Mount 4mm PQFN Package, RoHS* Compliant Description and Applications The MA-COM MASW-000834-13560T is a SPDT Broadband, high linearity, common anode, PIN diode T/R switch for 0.05 - 6.0 GHz applications, including WiMAX & WiFi. The device is provided in industry standard 4mm PQFN plastic packaging. This device incorporates a PIN diode die fabricated with M/A-COM’s patented SiliconGlass HMICTM process. This chip features two silicon pedestals embedded in a low loss, low dispersion glass. The diodes are formed on the top of each pedestal. The topside is fully encapsulated with silicon nitride and has an additional polymer passivation layer. These polymer protective coatings prevent damage and contamination during handling and assembly. This compact 4mm PQFN package, SPDT switch offers wideband 0.05 - 6.0 GHz performance with excellent isolation to loss ratio for both TX and RX states. The PIN diode provides exceptional 50 W C.W. power handling and 65 dBm IIP3 at 2010 MHz for maximum switch performance. Absolute Maximum Ratings 1 @ TA = +25 °C (unless otherwise specified) Parameter Absolute Maximum Forward Current | 100 mA | Reverse Voltage ( RF & D.C. ) | -200 V | Operating Temperature -40 °C to +85 °C Storage Temperature -55 °C to +150 °C Junction Temperature +175 °C TX Incident C.W. Power TX Peak Incident Power 1 50W (47 dBm) @ 2010MHz Pin Configuration: (Center Metal Area is RF, D.C., and Thermal Ground) Pin Function Pin Function 1 GND 9 DC2 2 ANT 10 N/C 3 GND 11 DC1 4 N/C 12 N/C 5 N/C 13 GND 6 GND 14 TX 7 RX 15 GND 8 GND 16 N/C Ordering Information Part Number Package MASW-000834-13560T Tape and Reel MASW-000834-001SMB Sample Board MADR-008851-0001TB Sample Board with recommended external Driver & MASW-00083413560T Switch 2 >300 W, 5us, 1% duty 1. Exceeding these limits may cause permanent damage. 2. Baseplate Temperature must be controlled to a constant 25°C. See page 7 for derating curve. Static Sensitivity These devices are rated Class 1B Human Body. Proper ESD control techniques should be used when handling these devices. * Restrictions on Hazardous Substances, European Union Directive ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V5 Electrical Specifications at +25°C, Characteristic Impedance, 20mA / 5V, Z0 = 50 Ω Parameter Symbol 20mA / 5V Conditions Units Min. Typ. Max. Insertion Loss, RX RX IL See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 0.34 0.56 Insertion Loss, TX TX IL See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 0.26 0.445 Isolation, TX To RX RX ISO See Bias Table 1, pg. 10, Pinc= 0 dBm dB 45.8 52.1 — Isolation, RX To TX TX ISO See Bias Table 1, pg. 10, Pinc= 0 dBm dB 21.7 27.1 — Insertion Loss, RX RX IL See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 0.40 0.72 Insertion Loss, TX Tx IL See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 0.32 0.49 Isolation, TX To RX Rx ISO See Bias Table 1, pg. 10, Pinc= 0 dBm dB 43.7 48.9 — Isolation, RX To TX TX ISO See Bias Table 1, pg. 10, Pinc= 0 dBm dB 18.4 21.4 Insertion Loss, RX RX IL See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 0.42 0.75 Insertion Loss, TX TX IL See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 0.33 0.5 Isolation, TX To RX RX ISO See Bias Table 1, pg. 10, Pinc= 0 dBm dB 43.2 44.6 — Isolation, RX To TX TX ISO See Bias Table 1, pg. 10, Pinc= 0 dBm dB 17.7 19.9 — Input Return Loss, TX TX RL See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 32.1 — Input Return Loss, RX RX RL See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 24.2 — F = 900 MHz F = 1800 MHz F = 2010 MHz 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V5 Electrical Specifications at +25°C, Characteristic Impedance, 20mA / 5V, Z0 = 50 Ω Parameter Symbol 20mA / 5V Conditions Units Min. Typ. Max. Insertion Loss, RX RX IL See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 0.46 0.84 Insertion Loss, TX TX IL See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 0.35 0.525 RX ISO TX ISO TX RL RX RL See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB 40.2 41.2 — dB 16.2 18.6 — dB — 30.5 — dB — 22.9 — RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 0.56 1.0 dB — 0.38 0.575 dB 33.7 35.9 — dB 13.6 16.1 — dB — 27.4 — dB — 21.9 — RX IL TX IL RX ISO See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 0.78 — dB — 0.52 — dB — 26.4 — Isolation, RX To TX TX ISO See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 11.8 — Input Return Loss, TX TX RL See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 20.3 Input Return Loss, RX RX RL See Bias Table 1, pg. 10, Pinc= 0 dBm dB — 24.2 F = 2.3-2.7 GHz Isolation, TX To RX Isolation, RX To TX Input Return Loss, TX Input Return Loss, RX F = 3.3-3.8 GHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX Input Return Loss, TX Input Return Loss, RX F = 4.9-5.9 GHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX — — 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V5 Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω Parameter Symbol 50mA / 25V Conditions RX IL TX IL RX ISO TX ISO See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm RX IL TX IL RX ISO TX ISO See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm Units Min. Typ. Max. dB — 0.27 — dB — 0.22 — dB — 53.3 — dB — 27.4 — dB — 0.32 — dB — 0.27 — dB — 50.2 — dB — 21.6 — dB — 0.34 — dB — 0.28 — dB — 45.5 — dB — 20.1 — dB — 33.1 — dB — 24.1 — F = 900 MHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX F = 1800 MHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX F = 2010 MHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX Input Return Loss, TX Input Return Loss, RX 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V5 Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω Parameter Symbol 50mA / 25V Conditions RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm Units Min. Typ. Max. dB — 0.38 — dB — 0.30 — dB — 41.8 — dB — 18.7 — dB — 31.3 — dB — 22.8 — dB — 0.47 — dB — 0.33 — dB — 36.2 — dB — 16.2 — dB — 28.0 — dB — 21.8 — dB — 0.72 — dB — 0.48 — dB — 26.6 — dB — 11.8 — dB — 20.5 — dB — 24.2 — F = 2.3-2.7 GHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX Input Return Loss, TX Input Return Loss, RX F = 3.3-3.8 GHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX Input Return Loss, TX Input Return Loss, RX F = 4.9-5.9 GHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX Input Return Loss, TX Input Return Loss, RX 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V5 Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω Parameter Symbol TX Input P1dB 2 TX P1dB TX 2Fo TX 3Fo TX IIP3 TX Pinc TX 2nd Harmonic TX 3rd Harmonic TX Input Third Order Intercept Point TX C.W. Input Power 2 50mA / 25V Conditions Units Min. Typ. Max. 2010 MHz, TX to Antenna dBm — >45.5 — 2010 MHz, Pin = + 30 dBm dBc — 80 — 2010 MHz, Pin = + 30 dBm dBc — 95 — Pi= +10dBm, F1 = 2010 MHz, F2 = 2020 MHz dBm — >64 — F = 2010 MHz dBm W — — 47 50 RX C.W. Input Power RX Pinc F = 2010 MHz dBm W — — 41.5 14 TX RF Switching Speed tRF F = 2010 MHz ( 10-90% RF Voltage) 1MHz Rep Rate in Modulating Mode ns — 200 — Parameter Symbol 50mA / 25V Conditions Units Min. Typ. Max. 3.5 GHz, TX to Antenna dBm — >45 — 3.5 GHz, Pin = + 30 dBm dBc — 88 — 3.5 GHz, Pin = + 30 dBm dBc — 105 — Pi= +10dBm, F1 = 3.500 GHz, F2 = 3.510 GHz dBm — >64 — TX Input P1dB TX 2nd Harmonic TX 3rd Harmonic TX Input Third Order Intercept Point TX IP1dB TX 2Fo TX 3Fo TX IIP3 RX C.W. Input Power RX Pinc F = 3.5 GHz dBm W — — 40.5 11 TX RF Switching Speed tRF F = 3.5 GHz ( 10-90% RF Voltage) 1MHz Rep Rate in Modulating Mode ns — 200 — 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V5 Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω Power Derating Curve, Tx Maximum C.W. Input Power (50mA Forward Bias, 2010 MHz) Maximum C.W. Input Power (Watts ) 55 50 45 40 35 30 25 45 65 85 Baseplate Temperature (Degrees C) Note that this part must be held to a constant baseplate temperature to achieve the power handling results specified above. Adding a heatsink to the baseplate will improve performance to values greater than shown here. The increase in maximum input power from using a heatsink depends on the specific heatsink design. With a sample board mounted onto a heatsink of dimensions and fins shown below, this switch can handle up to 35 Watts C.W. of incident power. 7 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V5 TX Performance Curves at +25°C, Characteristic Impedance, Z0 = 50 Ω 8 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V5 RX Performance Curves at +25°C, Characteristic Impedance, Z0 = 50 Ω 9 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V5 Bias Diagrams & Tables TX-ANT Insertion Loss RX-ANT Isolation RX-ANT Insertion Loss TX-ANT Isolation Bias Table 1 TX RX DC2 ANT Pin Pin 14 Pin 7 Pin 9 Pin 2 TX-ANT Isolation +5V, 0 mA -20 mA +5V, 0 mA 0V TX-ANT Insertion Loss -20 mA +5V, 0 mA -20 mA 0V RX-ANT Isolation -20 mA +5V, 0 mA -20 mA 0V RX-ANT Insertion Loss +5V, 0 mA -20 mA +5V, 0 mA 0V Bias Table 2 TX RX DC2 ANT Pin Pin 14 Pin 7 Pin 9 Pin 2 TX-ANT Isolation +25V, 0 mA -50 mA +25V, 0 mA 0V TX-ANT Insertion Loss -50 mA +25V, 0 mA -50 mA 0V RX-ANT Isolation -50 mA +25V, 0 mA -50 mA 0V RX-ANT Insertion Loss +25V, 0 mA -50 mA +25V, 0 mA 0V 10 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V5 MASW-000834-13560T Outline – 4mm PQFN 16-Lead Saw Singulated † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 11 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MASW-000834-13560T HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications Rev. V5 MASW-000834 and Recommended Driver with +5V & +28V DC Power ANT MADR-008851 is the recommended driver for the MASW-000834 Switch. C3 27 pF 100V R1 See Note 9 L1 27 nH Link to MADR-008851 Datasheet +5V C4 1000 pF TX Voltage C5 0.022 uF RX Voltage TX RX C1 27 pF 100V C2 27 pF 100V SPDT L2 27 nH +28V L3 27 nH C8 20 pF Note 11 +5V C6 12 pF C7 12 pF L4 27 nH SH Current TX RX Logic Input C1 SH2 MADR-008851-000100 Switch Driver R2 See Note 10 SH1 Ground 8. 9. 10. 11. 12. 13. 14. 15. Forward Bias Diode Voltage: ∆Vf is ~0.9V @ 22 mA; ∆Vf is ~1.0V @ 35 mA R1 is calculated by (Vcc-1.5V)/Iseries, where Iseries is the desired bias current for the series diodes. For 21 mA load current, R1 = 165 Ω @ VCC = 5.0V and 82 Ω @ VCC = 3.3V. For 32 mA load current, R1 = 110 Ω @ VCC = 5.0V and 56 Ω @ VCC= 3.3V. R2 is calculated by (Vdd-1V)/Ishunt, where Ishunt is the desired forward bias current for the shunt diode. The power dissipation is calculated by Ishunt x 27V. For 20 mA of Ishunt, R2 should use a 2511, 1W, 1.3k ohm resistor. C8 is already built-in for M/A-COM MASW-000834-13560T switch. The voltage at the common anode will be approximately 1.5V. The current in through the back-biased diodes will be the leakage current for the diodes C1-C5, L1-L4, R1, R2, and the switch are discrete components that should be installed on the user’s board. It is recommended that Coilcraft 0603CS-27NXJLW or equivalent be used for L1-L4 at 2 GHz (values may vary based on the frequency). There are 33 pF bypass capacitors included in the driver for the RX, TX, and SH1 ports. There are cases, especially at higher frequencies, where the optional 12 pF bypass capacitors (C6 and C7) that are shown on the schematic are needed. 12 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.