A GENERAL SPECIFICATIONS FOR S1 ~ S29 Power Level: Rockers Electrical Capacity (Resistive & Inductive Load) Shown in the following tables Pushbuttons Other Ratings 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 30,000 operations minimum for S5AW, S8AW, S9AW, S25AW, S28AW, S29AW 50,000 operations minimum for all other models 25,000 operations minimum Shown in tables on following pages Programmable Illuminated PB Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw (α): Materials & Finishes Brass with chrome plating Brass with chrome plating Phenolic resin Steel with zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Silver alloy capped on copper with silver plating Brass with tin plating Keylocks Toggle: Bushing: Case: Case Cover: Movable Contactor: Movable Contacts: Stationary Contacts: Terminals: Rotaries Toggles Series S Medium Capacity Standard Size Toggles Environmental Data Slides Operating Temp Range: –30°C through +70°C (–22°F through +158°F) for Splashproof models; –10°C through +70°C (+14°F through +158°F) for all other models Sealing: Splashproof & lever lock panel seal models meet IP67 standard Installation Tactiles 1.47Nm (13 lb•in) for single nut on AW & AL models 2.94Nm (26 lb•in) for double nut on other models Shown beneath panel cutout in switch dimension drawings Manual Soldering: See Profile A in Supplement section. Tilt Mounting Torque: Maximum Panel Thickness: Soldering Time & Temperature: Standards & Certifications Accessories Indicators File No. 023535_0_000 - Certified only when ordered with marking on switch. Add “/C” to end of part number to order CSA certified switch. CSA certification designated beside part numbers on following pages. See Supplement section to find CSA rating details. Supplement CSA: Touch UL: File No. E44145 - Recognized only when ordered with marking on switch. Add “/U” or “/CUL” to end of part number to order UL recognized switch. UL or cULus recognition designated beside part numbers on following pages. See Supplement section to find UL or cULus rating details. www.nkk.com A97 Toggles Series S Medium Capacity Standard Size Toggles A SINGLE POLE WITH SOLDER LUG * Down *Approvals Model Pole & Throw R C R US Resistive Up AC 125V Inductive AC 250V DC 30V Angle of Throw AC 125V PF 0.6 S1A SPST ON 1-3 NONE OFF — 15A 6A 20A 8A 25° S2A SPDT ON 2-3 NONE ON 2-1 15A 6A 20A 8A 25° S3A SPDT ON 2-3 OFF ON 2-1 15A 6A 20A 8A 25° Throw & Schematics: SPST 1 3 2 (COM) INTERNAL CONNECTION Note: Terminal numbers are actually on the switch SPDT 3 1 Notes: Standard Hardware: AT504M Knurled Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. * Wire harness & cable assemblies offered only in Americas. Keyway (2.4) Dia Typ .094 M12 P1 (0.8) Typ .031 (12.5) Dia .492 3 (4.8) Typ .189 25° (11.5) .453 (30.0) 1.181 2 1 (1.5) .060 (6.0) Dia .236 (5.7) .224 (18.0) .709 Rotaries Slides Tactiles Tilt Center Keyway (10.0) .394 (17.5) .689 (23.7) .933 S1A does not have terminal 2 S2A Maximum Panel Thickness: .158” (4.0mm) DOUBLE POLE WITH SOLDER LUG * * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) Down Model Pole & Throw R R S21A –– S6A S7A –– Throw & Schematics: C US –– –– –– DPST 1 Electrical Capacity Toggle Position/Connected Terminals *Approvals Center Resistive Up AC 125V Keyway Inductive AC 250V DC 30V α= Angle of Throw AC 125V PF 0.6 DPST ON 1-3 4-6 NONE OFF — 15A 15A 15A 8A 21° DPDT ON 2-3 5-6 NONE ON 2-1 5-4 20A 10A 20A 8A 21° DPDT ON 2-3 5-6 OFF ON 2-1 5-4 20A 10A 20A 8A 28° 3 4 6 INTERNAL CONNECTION 2 DPDT 3 (COM) 1 5 6 Note: Terminal numbers are actually on the switch 4 Notes: Standard Hardware: AT504M Knurled Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. * Wire harness & cables assemblies offered only in Americas. Indicators Touch Electrical Capacity Toggle Position/Connected Terminals Keylocks Programmable Illuminated PB Pushbuttons Rockers * UL, cULus & CSA recognized only when ordered with marking on switch (see General Specs) Keyway (2.4) Dia Typ .094 M12 P1 (4.8) Typ .189 Accessories α 6 3 5 2 4 1 (12.5) Dia .492 (11.5) .453 (31.2) 1.228 (6.0) Dia .236 (1.5) .060 (5.7) .224 Supplement (18.6) .732 (17.5) .689 (10.0) .394 (0.8) Typ .031 S21A does not have terminals 2 & 5 S6A A98 (25.7) 1.012 www.nkk.com Maximum Panel Thickness: .158” (4.0mm) A SINGLE POLE WITH QUICK CONNECT Model R Center Resistive Up Keyway Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 Angle of Throw S1F –– –– SPST ON 1-3 NONE OFF — 15A 6A 20A 8A 25° S2F –– –– SPDT ON 2-3 NONE ON 2-1 15A 6A 20A 8A 25° S3F –– –– SPDT ON 2-3 OFF ON 2-1 15A 6A 20A 8A 25° SPST 1 3 2 (COM) INTERNAL CONNECTION Note: Terminal numbers are actually on the switch SPDT 3 1 Programmable Illuminated PB Throw & Schematics: Pushbuttons Down Pole & Throw Notes: Standard Hardware: AT504M Knurled Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. (7.9) .311 M12 P1 (7.5) Typ .295 (6.35) Typ .250 25° (11.5) .453 (30.0) 1.181 2 1 (1.5) Dia Typ .060 (6.0) Dia .236 (12.5) Dia .492 3 Keylocks Keyway (1.5) .060 (10.0) .394 (17.5) .689 (29.7) 1.169 Maximum Panel Thickness: .158” (4.0mm) S1F does not have terminal 2 Rotaries (11.7) .461 (18.0) .709 Rockers Electrical Capacity Toggle Position/Connected Terminals Approvals Toggles Series S Medium Capacity Standard Size Toggles S2F Model R Center Resistive Up Keyway Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 α= Angle of Throw 15A 15A 15A 8A 21° S21F –– –– DPST ON 1-3 4-6 NONE S6F –– –– DPDT ON 2-3 5-6 NONE ON 2-1 5-4 20A 10A 20A 8A 21° S7F –– –– DPDT ON 2-3 5-6 OFF ON 2-1 5-4 20A 10A 20A 8A 28° Throw & Schematics: DPST 1 3 4 6 OFF — 2 INTERNAL CONNECTION DPDT 3 (COM) 1 5 6 4 Tilt Down Pole & Throw Note: Terminal numbers are actually on the switch 3 5 4 2 1 (12.5) Dia .492 (6.0) Dia .236 (11.8) .465 (18.6) .732 (17.5) .689 (10.0) .394 (31.8) 1.253 (11.5) .453 (31.2) 1.228 (6.35) Typ .250 α Note: S21F (11.7) .461 Indicators 6 (1.5) .060 Accessories (1.5) Dia Typ .060 (7.5) Typ .295 (0.8) Typ .031 S21F does not have terminals 2 & 5 www.nkk.com Maximum Panel Thickness: .158” (4.0mm) Supplement (7.9) .311 M12 P1 Touch Notes: Standard Hardware: AT504M Knurled Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Optional Splashproof Boot Assemblies: AT401 & AT4181 boots plus hex nut & o-ring. See Accessories & Hardware section. Keyway Tactiles Electrical Capacity Toggle Position/Connected Terminals Approvals Slides DOUBLE POLE WITH QUICK CONNECT S6F A99 Medium Capacity Standard Size Toggles A SINGLE POLE SOLDER LUG WITH PANEL SEAL * Toggle Position/Connected Terminals ( ) = Momentary Approvals Model Down Pole & Throw Resistive Up Keyway AC 125V AC 250V α= Angle of Throw DC 30V S1AW –– –– SPST ON 1-3 NONE OFF — 15A 6A 20A 24° Pushbuttons R Center Electrical Capacity S2AW –– –– SPDT ON 2-3 NONE ON 2-1 15A 6A 20A 24° S3AW –– –– SPDT ON 2-3 OFF ON 2-1 15A 6A 20A 28° S5AW –– –– SPDT ON 2-3 NONE (ON) 2-1 15A 6A 20A 20° S8AW –– –– SPDT (ON) 2-3 OFF (ON) 2-1 15A 6A 20A 24° Programmable Illuminated PB Rockers Toggles Series S S9AW –– –– SPDT ON 2-3 OFF (ON) 2-1 15A 6A 20A 24° Throw & Schematics: SPST 1 3 2 (COM) SPDT INTERNAL CONNECTION 3 Note: Terminal numbers are actually on the switch 1 Notes: Standard Hardware: AT503M Face Hex Nut, AT508 Lockwasher, AT537 O-ring. See Accessories & Hardware section. For .250” Quick Connect terminals, add “F” to end of part number. See Quick Connect terminal dimensions on previous page. For further information, contact factory. * Wire harness & cable assemblies offered only in Americas. (2.4) Dia Typ .094 (17.0) Dia .669 Keylocks Flat (10.9) .429 (12.5) Dia .492 M12 P1 Rotaries (18.0) .709 (7.5) .295 (12.5) .492 (17.5) .689 (5.7) .224 (23.7) .933 S1AW does not have terminal 2 S2AW Maximum Panel Thickness: .158” (4.0mm) DOUBLE POLE SOLDER LUG WITH PANEL SEAL * Slides Tactiles Tilt (11.1) .437 (30.0) 1.181 2 1 Toggle Position/Connected Terminals ( ) = Momentary Approvals Touch 3 (4.8) Typ .189 α (5.7) Dia .224 Model Down Pole & Throw R Center Electrical Capacity Resistive Up Keyway AC 125V AC 250V DC 30V α= Angle of Throw S21AW –– –– DPST ON 1-3 4-6 NONE OFF — 15A 15A 15A 22° S6AW –– –– DPDT ON 2-3 5-6 NONE ON 2-1 5-4 20A 10A 20A 22° S7AW –– –– DPDT ON 2-3 5-6 OFF ON 2-1 5-4 20A 10A 20A 28° S25AW –– –– DPDT ON 2-3 5-6 NONE (ON) 2-1 5-4 15A 6A 20A 20° S28AW –– –– DPDT (ON) 2-3 5-6 OFF (ON) 2-1 5-4 15A 6A 20A 22° S29AW –– –– DPDT ON 2-3 5-6 OFF (ON) 2-1 5-4 15A 6A 20A 22° Throw & Schematics: DPST 1 3 4 6 2 DPDT INTERNAL CONNECTION 3 (COM) 1 5 6 Note: Terminal numbers are actually on the switch 4 Notes: Standard Hardware: AT503M Face Hex Nut, AT508 Lockwasher, AT537 O-ring. See Accessories & Hardware section. For .250” Quick Connect terminals, add “F” to end of part number. See Quick Connect terminal dimensions on previous page. For further information, contact factory. * Wire harness & cable assemblies offered only in Americas. (17.0) Dia .669 (2.4) Dia Typ .094 Flat Accessories Indicators (0.8) Typ .031 (10.9) .429 α Supplement (5.7) Dia .224 (18.6) .732 3 5 2 4 1 (31.2) 1.228 (11.1) .437 (12.5) Dia .492 M12 P1 (17.5) .689 (7.5) .295 (12.5) .492 S6AW A100 6 (4.8) Typ .189 (5.7) .224 (25.7) 1.012 (0.8) Typ .031 S21AW does not have terminals 2 & 5 www.nkk.com Maximum Panel Thickness: .158” (4.0mm) A SINGLE POLE SOLDER LUG WITH LOCKING LEVER & PANEL SEAL * Model R C R US Center Resistive Up Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 α= Angle of Throw — 15A 6A 20A 8A 24° Keyway S1AL –– –– SPST ON 1-3 NONE S2AL –– –– SPDT ON 2-3 NONE ON 2-1 15A 6A 20A 8A 24° S3AL –– –– SPDT ON 2-3 OFF ON 2-1 15A 6A 20A 8A 28° 1 3 2 (COM) SPDT INTERNAL CONNECTION 3 Note: Terminal numbers are actually on the switch 1 Programmable Illuminated PB SPST Throw & Schematics: OFF Notes: Standard Hardware: AT503M Face Hex Nut, AT508 Lockwasher, AT537 O-ring. See Accessories & Hardware section. * Wire harness & cable assemblies offered only in Americas. (2.4) Dia Typ .094 (0.8) Typ .031 3 (4.8) Typ .189 α (11.2) .441 (30.0) 1.181 2 (12.2) Dia .480 1 (10.7) Dia .421 (7.5) .295 (12.0) .472 (17.0) .669 M12 P1 (23.5) .925 (26.4) 1.039 (18.0) .709 Keylocks Flat (5.7) .224 (23.7) .933 Maximum Panel Thickness: .158” (4.0mm) S1AL does not have terminal 2 Rotaries (7.4) Dia .291 (7.8) Dia .307 Pushbuttons Down Pole & Throw Rockers Electrical Capacity Toggle Position/Connected Terminals Approvals Toggles Series S Medium Capacity Standard Size Toggles S2AL DOUBLE POLE SOLDER LUG WITH LOCKING LEVER & PANEL SEAL * Down *Approvals Model S21AL C R –– US –– S6AL S7AL –– Throw & Schematics: –– Center Keyway Pole & Throw Resistive Up Slides Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 α= Angle of Throw DPST ON 1-3 4-6 NONE OFF — 15A 15A 15A 8A 22° DPDT ON 2-3 5-6 NONE ON 2-1 5-4 20A 10A 20A 8A 22° DPDT ON 2-3 5-6 OFF ON 2-1 5-4 20A 10A 20A 8A 28° DPST 1 3 4 6 2 DPDT INTERNAL CONNECTION 3 (COM) 1 5 6 Note: Terminal numbers are actually on the switch 4 Tilt R Electrical Capacity Toggle Position/Connected Terminals 5 2 4 1 M12 P1 (23.5) .925 (26.4) 1.039 (7.5) .295 (12.0) .472 (17.0) .669 (31.2) 1.228 (11.2) .441 (12.2) Dia .480 Accessories 3 (5.7) .224 (25.7) 1.012 (0.8) Typ .031 S21AL does not have terminals 2 & 5 www.nkk.com Maximum Panel Thickness: .158” (4.0mm) Supplement (18.6) .732 6 (4.8) Typ .189 Indicators (2.4) Dia Typ .094 Flat α (10.7) Dia .421 Touch Notes: Standard Hardware: AT503M Face Hex Nut, AT508 Lockwasher, AT537 O-ring. See Accessories & Hardware section. * Wire harness & cable assemblies offered only in Americas. (7.4) Dia .291 (7.8) Dia .307 Tactiles * UL & cULus recognized only when ordered with marking on switch (see General Specs) S6AL A101