VS-VSKU71.., VS-VSKV71.. Series www.vishay.com Vishay Semiconductors ADD-A-PAK Generation VII Power Modules Thyristor/Thyristor, 75 A FEATURES • High voltage • Industrial standard package • Low thermal resistance • UL approved file E78996 • Designed and qualified for industrial level • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 ADD-A-PAK BENEFITS • Excellent thermal performances obtained by the usage of exposed direct bonded copper substrate PRODUCT SUMMARY IT(AV) 75 A Type Modules - Thyristor, Standard • Up to 1600 V • High surge capability • Easy mounting on heatsink MECHANICAL DESCRIPTION The ADD-A-PAK generation VII, new generation of ADD-A-PAK module, combines the excellent thermal performances obtained by the usage of exposed direct bonded copper substrate, with advanced compact simple package solution and simplified internal structure with minimized number of interfaces. ELECTRICAL DESCRIPTION These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IT(AV) CHARACTERISTICS 75 50 Hz 1300 60 Hz 1360 115 IT(RMS) ITSM I2t VALUES 85 °C 50 Hz 8.45 60 Hz 7.68 I2t UNITS A kA2s 84.5 kA2s 400 to 1600 V TStg -40 to 125 °C TJ -40 to 125 °C VRRM Range Revision: 24-Mar-14 Document Number: 94654 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKU71.., VS-VSKV71.. Series www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V VDRM, MAXIMUM REPETITIVE PEAK OFF-STATE VOLTAGE, GATE OPEN CIRCUIT V 04 400 500 400 08 800 900 800 12 1200 1300 1200 16 1600 1700 1600 VS-VSK.71 IRRM, IDRM AT 125 °C mA 15 ON-STATE CONDUCTION PARAMETER Maximum average on-state current Maximum continuous RMS on-state current SYMBOL IT(AV) IT(RMS) TEST CONDITIONS 75 DC 115 TC 80 t = 10 ms Maximum peak, one-cycle non-repetitive on-state current ITSM No voltage reapplied t = 8.3 ms 100 % VRRM reapplied t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t t = 8.3 ms 100 % VRRM reapplied t = 10 ms Maximum value of threshold voltage I2t (1) VT(TO) (2) 1360 1093 Initial TJ = TJ maximum 7.68 5.97 0.96 Low level (3) rt (2) Maximum on-state voltage drop VTM ITM = x IT(AV) Maximum non-repetitive rate of rise of turned on current dI/dt High level (4) A TJ = TJ maximum TJ = TJ maximum TJ = 25 °C kA2s 5.45 Low level (3) Maximum value of on-state slope resistance °C 8.45 84.5 High level A 1140 t = 0.1 ms to 10 ms, no voltage reapplied TJ = TJ maximum (4) UNITS 1300 Sinusoidal half wave, initial TJ = TJ maximum No voltage reapplied t = 8.3 ms Maximum I2t for fusing VALUES 180° conduction, half sine wave, TC = 85 °C 1.08 3.28 2.86 kA2s V m 1.72 V TJ = 25 °C, from 0.67 VDRM, ITM = x IT(AV), Ig = 500 mA, tr < 0.5 μs, tp > 6 μs 150 A/μs Maximum holding current IH TJ = 25 °C, anode supply = 6 V, resistive load, gate open circuit 250 Maximum latching current IL TJ = 25 °C, anode supply = 6 V, resistive load 400 mA Notes (1) I2t for time t = I2t x t x x (2) Average power = V 2 T(TO) x IT(AV) + rt x (IT(RMS)) (3) 16.7 % x x I < I < x I AV AV (4) I > x I AV Revision: 24-Mar-14 Document Number: 94654 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKU71.., VS-VSKV71.. Series www.vishay.com Vishay Semiconductors TRIGGERING PARAMETER SYMBOL Maximum peak gate power Maximum average gate power Maximum peak gate current Maximum peak negative gate voltage TEST CONDITIONS VALUES PGM 12 PG(AV) 3.0 IGM 3.0 - VGM 10 VGT W A 4.0 TJ = - 40 °C Maximum gate voltage required to trigger UNITS Anode supply = 6 V resistive load TJ = 25 °C TJ = 125 °C 1.7 TJ = - 40 °C 270 Anode supply = 6 V resistive load TJ = 25 °C V 2.5 mA 150 Maximum gate current required to trigger IGT Maximum gate voltage that will not trigger VGD TJ = 125 °C, rated VDRM applied 0.25 V Maximum gate current that will not trigger IGD TJ = 125 °C, rated VDRM applied 6 mA VALUES UNITS 15 mA 3000 (1 min) 3600 (1 s) V 1000 V/μs VALUES UNITS -40 to 125 °C TJ = 125 °C 80 BLOCKING PARAMETER SYMBOL TEST CONDITIONS Maximum peak reverse and off-state leakage current at VRRM, VDRM IRRM, IDRM TJ = 125 °C, gate open circuit Maximum RMS insulation voltage VINS 50 Hz Maximum critical rate of rise of off-state voltage dV/dt TJ = 125 °C, linear to 0.67 VDRM THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Junction operating and storage temperature range TEST CONDITIONS TJ, TStg Maximum internal thermal resistance, junction to case per leg RthJC DC operation 0.29 Typical thermal resistance, case to heatsink per module RthCS Mounting surface flat, smooth and greased 0.1 °C/W A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. to heatsink Mounting torque ± 10 % busbar 4 Nm 3 Approximate weight JEDEC® Case style 75 g 2.7 oz. AAP GEN VII (TO-240AA) R CONDUCTION PER JUNCTION DEVICES VSK.71.. SINE HALF WAVE CONDUCTION RECTANGULAR WAVE CONDUCTION 180° 120° 90° 60° 30° 180° 120° 90° 60° 30° 0.052 0.062 0.079 0.116 0.197 0.037 0.064 0.085 0.121 0.200 UNITS °C/W Note • Table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Revision: 24-Mar-14 Document Number: 94654 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKU71.., VS-VSKV71.. Series RthJC (DC) = 0.29°C/W 120 110 100 90 180° 120° 90° 60° 30° 80 70 10 20 30 40 50 60 70 180 180° 120° 90° 60° 30° 160 140 120 100 DC RMS limit 80 60 40 20 Per leg, Tj = 125°C 0 80 0 20 40 60 80 100 120 Average on-state current (A) Average on-state current (A) Fig. 1 - Current Ratings Characteristics Fig. 4 - On-State Power Loss Characteristics 1200 130 RthJC (DC) = 0.29°C/W Peak half sine wave on-state current (A) Maximum allowable case temperature (°C) Maximum average on-state power loss (W) 130 0 120 110 100 DC 180° 120° 90° 60° 30° 90 80 70 0 Maximum average on-state power loss (W) Vishay Semiconductors 20 40 60 80 100 At any rated load condition and with rated Vrrm applied following surge Initial Tj = Tj max @ 60 Hz 0.0083 s @ 50 Hz 0.0100s 1100 1000 900 800 700 600 Per leg 500 120 1 10 100 Average on-state current (A) Number of equal amplitude half cycle current pulses (N) Fig. 2 - Current Ratings Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current 140 1400 180° 120° 90° 60° 30° 120 100 Peak half sine wave on-state current (A) Maximum allowable case temperature (°C) www.vishay.com 80 RMS limit 60 40 20 Per leg, Tj = 125°C 0 0 10 20 30 40 50 60 70 80 Average on-state current (A) Fig. 3 - On-State Power Loss Characteristics 1200 1000 Maximum Non-repetitive Surge Current Versus Pulse Train Duration. Control of conduction may not be maintained. Initial Tj = 125°C No Voltage Reapplied Rated Vrrm reapplied 800 600 Per leg 400 0.01 0.1 1 Pulse train duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current Revision: 24-Mar-14 Document Number: 94654 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKU71.., VS-VSKV71.. Series www.vishay.com Vishay Semiconductors Maximum total power loss (W) 700 RthSA = 0.1 °C/W 0.2 °C/W 0.3 °C/W 0.5 °C/W 1 °C/W 2 °C/W 180° (sine) 180° (rect) 600 500 400 ∼ 300 200 2 x VSK.71 Series single phase bridge connected Tj = 125°C 100 0 0 0 20 40 60 80 100 120 140 160 180 20 40 60 80 100 120 140 Maximum allowable ambient temperature (°C) Total output current (A) Fig. 7 - On-State Power Loss Characteristics Maximum total power loss (W) 800 RthSA = 0.1 °C/W 0.2 °C/W 0.3 °C/W 0.5 °C/W 1 °C/W 700 60° (rect) 600 500 400 300 3 x VSK.71 Series 6-pulse midpoint connection bridge Tj = 125°C 200 100 0 0 50 0 100 150 200 250 300 350 20 40 60 80 100 120 140 Maximum allowable ambient temperature (°C) Total output current (A) Fig. 8 - On-State Power Loss Characteristics Instantaneous on-state current (A) 1000 Per leg 100 10 Tj = 125°C Tj = 25°C 1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Instantaneous on-state voltage (V) Fig. 9 - On-State Voltage Characteristics Revision: 24-Mar-14 Document Number: 94654 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKU71.., VS-VSKV71.. Series Transient thermal impedance Z thJC (°C/W) www.vishay.com Vishay Semiconductors 1 Steady state value RthJC = 0.29 °C/W (DC operation) 0.1 Per leg 0.01 0.001 0.01 0.1 1 10 Square wave pulse duration (s) Fig. 10 - Thermal Impedance ZthJC Characteristics Rec tangular ga te pulse a )Recommend ed load line for ra ted di/ d t: 20 V, 20 ohms tr = 0.5 µs, tp >= 6 µs b )Recommend ed load line for <= 30% rated di/ dt: 15 V, 40 ohms 10 tr = 1 µs, tp >= 6 µs (1) PGM = 200 W, tp = 300 µs (2) PGM = 60 W, tp = 1 ms (3) PGM = 30 W, tp = 2 ms (4) PGM = 12 W, tp = 5 ms (a) (b) 1 TJ = -40 °C TJ = 125 °C TJ = 25 °C Instantaneous gate voltage (V) 100 (4) (3) (2) (1) VGD IGD 0.1 0.001 VSK.71 IRK.71../ .91.. Series Frequenc y Limited by PG(AV) 0.01 0.1 1 10 100 1000 Instantaneous gate current (A) Fig. 11 - Gate Characteristics ORDERING INFORMATION TABLE Device code VS-VS K U 71 1 2 3 4 / 16 5 2 - Vishay Semiconductors product Module type 3 - Circuit configuration (see Circuit Configuration table) 4 - Current code (75 A) 5 - Voltage code (see Voltage Ratings table) 1 Note • To order the optional hardware go to www.vishay.com/doc?95172 Revision: 24-Mar-14 Document Number: 94654 6 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKU71.., VS-VSKV71.. Series www.vishay.com Vishay Semiconductors CIRCUIT CONFIGURATION CIRCUIT DESCRIPTION CIRCUIT CONFIGURATION CODE CIRCUIT DRAWING VSKU (1) + 1 Two SCRs common cathodes 2 U (2) 3 4 5 7 6 (3) G1 K1 K2 G2 (4) (5) (7) (6) VSKV (1) - 1 Two SCRs common anodes V 2 + (2) 3 4 5 7 6 + (3) G1 K1 K2 G2 (4) (5) (7) (6) LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95368 Revision: 24-Mar-14 Document Number: 94654 7 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors ADD-A-PAK Generation VII - Thyristor DIMENSIONS in millimeters (inches) 29 ± 0.5 (1 ± 0.020) 30 ± 0.5 (1.18 ± 0.020) 35 REF. 18 (0.7) REF. 30 ± 1 (1.18 ± 0.039) 15.5 ± 0.5 (0.6 ± 0.020) 24 ± 0.5 (1 ± 0.020) Viti M5 x 0.8 Screws M5 x 0.8 6.7 ± 0.3 (0.26 ± 0.012) Fast-on tab 2.8 x 0.8 (0.110 x 0.03) Document Number: 95368 Revision: 11-Nov-08 20 ± 0.5 (0.79 ± 0.020) 20 ± 0.5 (0.79 ± 0.020) 92 ± 0.75 (3.6 ± 0.030) 5.8 ± 0.25 (0.228 ± 0.010) 15 ± 0.5 (0.59 ± 0.020) For technical questions, contact: [email protected] 4 ± 0.2 (0.157 ± 0.008) 7 6 4 5 3 2 1 6.3 ± 0.2 (0.248 ± 0.008) 22.6 ± 0.2 (0.89 ± 0.008) 80 ± 0.3 (3.15 ± 0.012) www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000