MA111 Zener Diodes Composite Elements MA3062WA Silicon planer type Constant voltage, constant current, waveform cripper and surge absorption circuit 1.45 0.95 1 3 +0.1 0.4 –0.05 anode-common wiring of MA3062 1.9±0.2 ● Two 0.65±0.15 0.95 +0.2 2.9 –0.05 type package (3-pin) +0.25 1.5 –0.05 0.65±0.15 ■ Features ● Mini Unit : mm +0.2 2.8 –0.3 Symbol Rating Unit IF(AV) 100*1 mA Instanious forward current IFRM 200*1 mA Total power dissipation Ptot *2 100*1 mW Non-repetitive reverse surge power dissipation PZSM*3 15 W Junction temperature Tj 150 ˚C Storage temperature Tstg – 55 to + 150 ˚C +0.1 0 to 0.1 0.1 to 0.3 0.4±0.2 Average forward current Parameter 0.8 +0.2 1.1 –0.1 ■ Absolute Maximum Ratings (Ta= 25˚C) 0.16 –0.06 2 1 : Cathode 1 2 : Cathode 2 3 : Anode 1 Anode 2 Mini Type Package (3-pin) ■ Internal Connection 1 *1 Working value in a single piece With a printed-circuit board *3 t=100µ s, Tj=150˚C 3 *2 2 1 ■ Electrical Characteristics (Ta= 25˚C)* Parameter Forward voltage Condition Symbol min IF=10mA VF *2 IZ= 5mA Zener voltage VZ Operating resistance RZ IZ= 5mA Reverse current IR VR= 4V Temperature coefficient of zener voltage SZ *3 IZ= 5mA Terminal capacitance Ct VR= 0V, f=1MHz 5.8 typ max 0.8 0.9 6.2 6.6 V 6 20 Ω 2.3 3.7 mV/˚C 90 130 pF Unit V 3 0.4 Note 1. Rated input/output frequency : 5MHz 2. * 1 : The VZ value is for the temperature of 25˚C. In other cases, carry out the temperature compensation. * 2 : Guaranteeed at 20ms after power application 200 * 3 : Tj= 25 to 150˚C µA Ptot – Ta With a printed-circuit board 10mm 10mm K A 6.2A Power dissipation ■ Marking Ptot (mW) 0.8mm Cu foil t=0.035 mm 150 100 50 0 0 40 80 120 Ambient temperature 160 Ta (˚C) 200