NX-5400 Single Hung Tilt Window

NX-5400
3-1/4” Single Hung Tilt
Thermal Aluminum Window
Commercial CW-PG50-H Single Hung Tilt
FEATURES
STANDARD CONFIGURATIONS
1
2
3
4
• NexGen™ Technology
• NexGen Energy Spacer™
• NexGen Thermal Barrier System™
• Marine Glazed Vents
BENEFITS
5
6
7
H mullion
Performance and flexibility:
• Unmatched energy efficiency
• Outstanding air and water performance
• Dual color or dual finish available
STANDARD PACKAGES
• 3-1/4" equal leg frame
8
9
• 1-1/8" nailing fin or 1-1/2" flange frame
• 7/8" insulating glass
• 1/8" clear x 5/8" airspace x 1/8" clear
• 1/8" clear x 5/8" Argon x 1/8" Low-E
PRODUCT STANDARDS
All configurations shown are produced in one master frame other
than the one noted.
PERFORMANCE AND SIZE LIMITATIONS
Performance
Air
.30 cfm/sf
Water
10 lb.
U-Value
0.37*
SHGC
0.32
• Class IV balances
• Sweep lock (white or black)
• Roll formed aluminum screen
• Finger button tilt latch (white or black)
• PPG Duracron™ Paint
• Sash stops
OPTIONS
• Full Extruded aluminum screen
• Half Extruded aluminum screen
• Full length Sash stops
• Tamper resistent thumb buttons
• Applied Exterior Muntins
• Automatic sill lock
• Tempered glass
• Bronze or grey tint
• PPG DuraNAR™ Paint
• Clear or dark bronze anodize
• Dual Color Colonial muntins (4 or 6 lite)
Min Size
18" x 36"
Max Size
48" x 84"
Config 2 & 3
36" x 36"
72" x 72"
54" x 36"
108" x 72"
Config 5 & 6
18" x 48"
48" x 90"
ACCESSORIES
Config 7 & 8
36" x 48"
72" x 90"
54" x 36"
108" x 72"
Sizing
Config 1
Config 4
Config 9
*7/8" IGU with Soft Coat Low-E and Argon Gas
• Trim / clip
• Preset panning
• Snap-in 1-1/2" Flange
• Snap-in Nailing Fin
• Wrap around panning
• L angle
• Head expander
• H mullion
• F channel
• Receptor/Subsill
71 Progress Ave., Cranberry Township, PA 16066 • (800) 837-7002 • www.traco.com • [email protected]
5400/4-11 rev
NX-5400
COMMERCIAL
3-1/4" SINGLE HUNG TILT
Page 1
ELEVATIONS
SERIES NX-540
SINGLE HUNG TILT
1 A,B
5
1
1
6
4 A,B
3
A,B
4
5
8
9
2
2 A,B
1
1
2
1
4
5
5
11
3
1
1
4
6
5
8
1
1
8 SIM.
5
10
SIM.
3
3
3
9
2
2
1
H-MULL
1
1
4
11
5
4
6
5
5
6
9
2
3
3
3
7
2
1 9
www.traco.com
11
7
1 9
4
NX-5400
COMMERCIAL
3-1/4" SINGLE HUNG TILT
Page 2
HALF SCALE SECTIONS
1 HEAD
1A HEAD (FLANGE)
2 7/8"
3/4"
3/4"
WINDOW HEIGHT
1 3/8"
2A SILL (FLANGE)
2 SILL
3 1/8"
3 3/8"
3 1/8"
3 3/8"
2 3/16"
3 11/16"
2B SILL (NAILFIN)
1B HEAD (NAILFIN)
1 1/8"
3/4"
1 3/8"
3 1/8"
2 3/16"
1 1/8"
www.traco.com
3 3/8"
NX-5400
COMMERCIAL
3-1/4" SINGLE HUNG TILT
Page 3
HALF SCALE SECTIONS
3 LEFT JAMB
4 RIGHT JAMB
2 7/8"
2 7/8"
WINDOW WIDTH
3A LEFT JAMB (FLANGE)
4A RIGHT JAMB (FLANGE)
WINDOW WIDTH
4 3/8"
4 3/8"
3B LEFT JAMB (NAILFIN)
4B RIGHT JAMB (NAILFIN)
4"
4"
1 1/8"
2 7/8"
2 7/8"
WINDOW WIDTH
www.traco.com
1 1/8"
NX-5400
COMMERCIAL
3-1/4" SINGLE HUNG TILT
Page 4
HALF SCALE SECTIONS
5 MEETING RAIL
6 VERTICAL INTEGRAL MULLION
1 7/8"
2 3/8"
1 9/16"
4 3/4"
8 VERTICAL INTEGRAL MULLION
7 HORIZONTAL INTEGRAL MULLION
(FIXED/SINGLE HUNG)
2 1/8"
3 7/16"
4 1/8"
4 3/4"
www.traco.com
NX-5400
COMMERCIAL
3-1/4" SINGLE HUNG TILT
Page 5
HALF SCALE SECTIONS
1 FIXED HEAD
10 FIXED JAMB
1 7/16"
1 3/8"
WINDOW HEIGHT
2 7/8"
9 FIXED SILL
3 3/4"
11 H-MULL TRANSITION MULLION
3 9/16"
www.traco.com
1 5/8"
1 5/8"
2 1/8"