NX-240 / NX-250 2-1/4" Project In / Out Thermal Aluminum Window Commercial CW-PG50-AP Projected FEATURES STANDARD CONFIGURATIONS 12 3 All configurations are produced in one master frame. 45 6 • NexGen™ Technology • NexGen Energy Spacer™ • NexGen Thermal Barrier System™ BENEFITS Performance and flexibility: • Unmatched energy efficiency • Outstanding air and water performance • Dual color or dual finish available STANDARD PACKAGES • 2-1/4" equal leg frame NX-250 shown - NX-240 configurations would be bottom hinge •1-1/8" nailing fin or 1-1/2" flange frame (single vent only) • 1" insulating glass •1/8" clear x 3/4" airspace x 1/8" clear •1/8" clear x 3/4" Argon x 1/8" Low-E PRODUCT STANDARDS • Cam handle & 4 bar hinge • Extruded aluminum screen • PPG Duracron™ Paint OPTIONS PERFORMANCE AND SIZE LIMITATIONS Performance* Air .30 cfm/sf Water 10 lb. U-Value 0.42** SHGC 0.32 Min Size Max Size 18" x 18" 48" x 32" Config 2 & 3 36" x 18" 96" x 32" Config 4 18" x 36" 48" x 72" Config 5 18" x 54" 48" x 96" Config 6 36" x 42" 64" x 72" Sizing Config 1 • Pole Ring Cam handles • Full Screen • Butt hinge • Tempered glass • Bronze or grey tint • PPG DuraNAR™ Paint • Clear or dark bronze anodize • Integral mullions (vertical and horizontal) ACCESSORIES • Trim / clip • Preset or wrap around panning • Strap Anchor • H mullion *NX-250 **1" IGU with Soft Coat Low-E and Argon Gas 71 Progress Ave., Cranberry Township, PA 16066 • (800) 837-7002 • www.traco.com • [email protected] 240_250/4-11 rev NX-240 COMMERCIAL 2-1/4" PROJECTED WINDOWS Page 1 ELEVATIONS A DIVISION OF KAWNEER SERIES NX-240 PROJECT IN 1 A 1 A 3 4 A 3 4 5 2 A 2 6 6 1 8 9 8 10 4 4 3 2 7 2 6 11 8 6 10 5 3 12 8 10 4 4 3 2 2 www.traco.com COMMERCIAL 2-1/4" PROJECTED WINDOWS A DIVISION OF KAWNEER NX-240 Page 2 HALF SCALE SECTIONS 1 VENT HEAD 1A VENT HEAD (NAILFIN) 1 1/8" WINDOW HEIGHT 3 1/4" WINDOW HEIGHT 3 1/4" 2A VENT SILL (NAILFIN) 2 VENT SILL 3 1/4" 3 1/4" 1 1/8" www.traco.com NX-240 COMMERCIAL 2-1/4" PROJECTED WINDOWS A DIVISION OF KAWNEER Page 3 HALF SCALE SECTIONS 3 VENT JAMB 4 VENT JAMB 3 1/4" 3 1/4" WINDOW WIDTH 3 VENT JAMB (NAILFIN) 1 1/8" 4 VENT JAMB (NAILFIN) 3 1/4" 3 1/4" WINDOW WIDTH www.traco.com 1 1/8" NX-240 COMMERCIAL 2-1/4" PROJECTED WINDOWS Page 4 HALF SCALE SECTIONS A DIVISION OF KAWNEER 6 FIXED HEAD 5 VERTICAL INTEGRAL MULLION (VENT/VENT) 2" 2 1/2" WINDOW HEIGHT WINDOW WIDTH 7 FIXED SILL 8 FIXED JAMB 2" 2" WINDOW WIDTH www.traco.com NX-240 COMMERCIAL 2-1/4" PROJECTED WINDOWS HALF SCALE SECTIONS A DIVISION OF KAWNEER 9 VERTICAL INTEGRAL MULLION (FIXED/VENT) 11 VERTICAL INTEGRAL MULLION (FIXED/FIXED) 3 3/4" 2 1/2" WINDOW WIDTH WINDOW WIDTH 10 HORIZONTAL INTEGRAL MULLION (FIXED/VENT) 12 HORIZONTAL INTEGRAL MULLION (FIXED/FIXED) WINDOW HEIGHT WINDOW HEIGHT Page 5 3 3/4" www.traco.com 2 1/2"