NX-220 Casement Inswing Overlap Window

NX-210 / NX-220
2-1/4” Casement
Outswing / Inswing
Thermal Aluminum Window
Commercial CW-PG50-C Casement
FEATURES
STANDARD CONFIGURATIONS
1
2
3
4
• NexGen™ Technology
•NexGen Energy Spacer™
•NexGen Thermal Barrier System™
BENEFITS
5
6
7
8
Performance and flexibility:
• Unmatched energy efficiency
• Outstanding air and water performance
• Dual color or dual finish available
STANDARD PACKAGES
• 2-1/4" equal leg frame
All configurations are produced in one master frame.
•1-1/8" nailing fin or
1-1/2" flange frame (single vent only)
• 1" insulating glass
•1/8" clear x 3/4" airspace x 1/8" clear
•1/8" clear x 3/4" Argon x 1/8" Low-E
PRODUCT STANDARDS
• Cam handle & 4 bar hinge
• Extruded aluminum screen
• PPG Duracron™ Paint
OPTIONS
PERFORMANCE AND SIZE LIMITATIONS
Performance*
Air
0.1 cfm/sf
Water
10 lb.
Sizing
Config 1
Config 2 & 3
Config 4
Config 5 & 6
Config 7 & 8
U-Value
0.42**
Min Size
18" x 30"
36" x 30"
36" x 30"
18" x 42"
36" x 42"
SHGC
0.32
Max Size
32" x 60"
64" x 60"
96" x 60"
32" x 72"
64" x 72"
• Roto-operator (NX-210 only), butt hinge
& multi-point lock
• Pole Ring Cam handles
• Full Screen
• Tempered glass
• Bronze or grey tint
• PPG DuraNAR™ Paint
• Clear or dark bronze anodize
• Integral mullions (vertical and horizontal)
ACCESSORIES
• Trim / clip
• Preset or wrap around panning
• Strap Anchor
• H mullion
*NX-210
**1” IGU with Soft Coat Low-E and Argon Gas
71 Progress Ave., Cranberry Township, PA 16066 • (800) 837-7002 • www.traco.com • [email protected]
210_220/4-11 rev
NX-220
COMMERCIAL
2-1/4" CASEMENT WINDOWS
Page 1
ELEVATIONS
A DIVISION OF KAWNEER
SERIES NX-220
CASEMENT INSWING
RIGHT HAND SHOWN
1 A
5
4 A
1
4
4
8
A 3
1
9
7
2
6
2 A
5
5
1
1
10
4
3
4
8
4
3
11
6
2
2
5
6
1
10
4
9
4
9
11
2
6
www.traco.com
NX-220
COMMERCIAL
2-1/4" CASEMENT WINDOWS
Page 2
HALF SCALE SECTIONS
A DIVISION OF KAWNEER
1A VENT HEAD
(NAILFIN)
1 VENT HEAD
1 1/8"
.827
3 1/4"
3 1/4"
WINDOW HEIGHT
WINDOW HEIGHT
3 1/4"
2A VENT SILL
(NAILFIN)
2 VENT SILL
3 1/4"
3 1/4"
1 1/8"
www.traco.com
3 1/4"
NX-220
COMMERCIAL
2-1/4" CASEMENT WINDOWS
A DIVISION OF KAWNEER
Page 3
HALF SCALE SECTIONS
3 VENT JAMB (HANDLE)
4 VENT JAMB (PIVOT)
3 1/4"
WINDOW WIDTH
3A VENT JAMB (HANDLE)
(NAILFIN)
4A VENT JAMB (PIVOT)
(NAILFIN)
4 3/8"
1 1/8"
4 3/8"
WINDOW WIDTH
www.traco.com
1 1/8"
NX-220
COMMERCIAL
2-1/4" CASEMENT WINDOWS
A DIVISION OF KAWNEER
Page 4
HALF SCALE SECTIONS
5 FIXED HEAD
7 FIXED JAMB
2"
2"
WINDOW HEIGHT
WINDOW WIDTH
8 VERTICAL INTEGRAL MULLION
(FIXED/VENT)
6 FIXED SILL
3 11/16"
2"
WINDOW WIDTH
www.traco.com
COMMERCIAL
2-1/4" CASEMENT WINDOWS
A DIVISION OF KAWNEER
NX-220
Page 5
HALF SCALE SECTIONS
9 VERTICAL INTEGRAL MULLION
(VENT/VENT)
5 1/16"
WINDOW WIDTH
3 3/4"
11 HORIZONTAL INTEGRAL MULLION
WINDOW HEIGHT
WINDOW HEIGHT
10 HORIZONTAL INTEGRAL MULLION
www.traco.com
3 3/4"