NX-210 / NX-220 2-1/4” Casement Outswing / Inswing Thermal Aluminum Window Commercial CW-PG50-C Casement FEATURES STANDARD CONFIGURATIONS 1 2 3 4 • NexGen™ Technology •NexGen Energy Spacer™ •NexGen Thermal Barrier System™ BENEFITS 5 6 7 8 Performance and flexibility: • Unmatched energy efficiency • Outstanding air and water performance • Dual color or dual finish available STANDARD PACKAGES • 2-1/4" equal leg frame All configurations are produced in one master frame. •1-1/8" nailing fin or 1-1/2" flange frame (single vent only) • 1" insulating glass •1/8" clear x 3/4" airspace x 1/8" clear •1/8" clear x 3/4" Argon x 1/8" Low-E PRODUCT STANDARDS • Cam handle & 4 bar hinge • Extruded aluminum screen • PPG Duracron™ Paint OPTIONS PERFORMANCE AND SIZE LIMITATIONS Performance* Air 0.1 cfm/sf Water 10 lb. Sizing Config 1 Config 2 & 3 Config 4 Config 5 & 6 Config 7 & 8 U-Value 0.42** Min Size 18" x 30" 36" x 30" 36" x 30" 18" x 42" 36" x 42" SHGC 0.32 Max Size 32" x 60" 64" x 60" 96" x 60" 32" x 72" 64" x 72" • Roto-operator (NX-210 only), butt hinge & multi-point lock • Pole Ring Cam handles • Full Screen • Tempered glass • Bronze or grey tint • PPG DuraNAR™ Paint • Clear or dark bronze anodize • Integral mullions (vertical and horizontal) ACCESSORIES • Trim / clip • Preset or wrap around panning • Strap Anchor • H mullion *NX-210 **1” IGU with Soft Coat Low-E and Argon Gas 71 Progress Ave., Cranberry Township, PA 16066 • (800) 837-7002 • www.traco.com • [email protected] 210_220/4-11 rev NX-210 COMMERCIAL 2-1/4" CASEMENT WINDOWS Page 1 ELEVATIONS A DIVISION OF KAWNEER SERIES NX-210 CASEMENT OUTSWING LEFT HAND SHOWN 1 5 1 1 A,B 4 A,B 4 4 13 A,B 3 1 7 14 8 12 2 A,B 9 6 2 2 BUTT HINGE OPTION 1 5 1 5 10 4 3 8 3 6 11 2 6 2 1 5 10 4 4 9 9 11 2 6 www.traco.com NX-210 COMMERCIAL 2-1/4" CASEMENT WINDOWS Page 2 HALF SCALE SECTIONS A DIVISION OF KAWNEER 1A VENT HEAD (FLANGE FRAME) *SINGLE VENT ONLY* 1 VENT HEAD OPTIONAL DRIP CAP SUPPLIED LOOSE FROM UNIT OPTIONAL DRIP CAP SUPPLIED LOOSE FROM UNIT 4 3/4" 2A VENT SILL (FLANGE FRAME) *SINGLE VENT ONLY* 2 VENT SILL 3 1/4" 4 3/4" 1 1/8" 2B VENT SILL (NAILFIN) 1B VENT HEAD (NAILFIN) 3 1/4" 3 1/4" 1 1/8" www.traco.com WINDOW HEIGHT WINDOW HEIGHT 3 1/4" NX-210 COMMERCIAL 2-1/4" CASEMENT WINDOWS Page 3 HALF SCALE SECTIONS A DIVISION OF KAWNEER 3 VENT JAMB (HANDLE) 4 VENT JAMB (PIVOT) 3 1/4" WINDOW WIDTH 3A VENT JAMB (HANDLE) (FLANGE FRAME) 4A VENT JAMB (PIVOT) (FLANGE FRAME) 1 1/2" 4 3/4" 2 3/8" 3B VENT JAMB (HANDLE) (NAILFIN) 1 1/8" 4B VENT JAMB (PIVOT) (NAILFIN) 3 1/4" 3 1/4" WINDOW WIDTH www.traco.com 1 1/8" NX-210 COMMERCIAL 2-1/4" CASEMENT WINDOWS A DIVISION OF KAWNEER Page 4 HALF SCALE SECTIONS 5 FIXED HEAD 7 FIXED JAMB 2" 2" WINDOW HEIGHT WINDOW WIDTH 2" 2 3/8" 3 3/4" WINDOW WIDTH 6 FIXED SILL 8 VERTICAL INTEGRAL MULLION (FIXED/VENT) www.traco.com NX-210 COMMERCIAL 2-1/4" CASEMENT WINDOWS Page 5 HALF SCALE SECTIONS A DIVISION OF KAWNEER 9 VERTICAL INTEGRAL MULLION (VENT/VENT) 2 3/8" 5" WINDOW WIDTH 10 HORIZONTAL INTEGRAL MULLION 11 HORIZONTAL INTEGRAL MULLION WINDOW HEIGHT WINDOW HEIGHT OPTIONAL DRIP CAP SUPPLIED LOOSE FROM UNIT 3 3/4" 2 3/8" www.traco.com 2 3/8" 3 3/4" NX-210 COMMERCIAL 2-1/4" CASEMENT WINDOWS A DIVISION OF KAWNEER Page 6 HALF SCALE SECTIONS 1 VENT HEAD 13 VENT JAMB (MULTI-POINT LOCK) WINDOW HEIGHT OPTIONAL DRIP CAP SUPPLIED LOOSE FROM UNIT 3 1/4" 3 1/4" WINDOW WIDTH WINDOW HEIGHT 12 VENT SILL (ROTO OPERATOR) 14 VENT JAMB (HINGE) (ROTO OPERATOR) 3 1/4" 3 1/4" WINDOW WIDTH www.traco.com