Datasheet

WIDE DYNAMIC RANGE
PHOTOMULTIPLIER TUBE UNIT
This unit is capable of measuring light levels at one time
over a wide dynamic range up to 8 orders of magnitude.
This wide dynamic range is achieved by simultaneously
extracting a digital output (single photon counting) for detecting very-low-level light and an analog output for detecting low light levels visible to the human eye.
FEATURES
● Swift continuous measurement over a wide dynamic range
Up until now, measurement of light requiring a wide dynamic
range has used two separate measurement methods: one for
lower light levels and one for higher light levels.
● Easy-to-use data acquisition unit
Single photon counting output and analog output of the wide
dynamic range PMT module are transferred to a PC via USB
connection, and the two types of signals are synthesized into
one by the supplied software.
Left: H13126, Right: C12918 series
SPECIFICATIONS
Wide dynamic range photomultiplier tube module H13126
Parameter
Effective area
Spectral response
Peak wavelength
Photon counting
Analog (Amplifier output)
Output signal
Pulse pair resolution
Dark count A
Bandwidth (-3 dB)
Count-to-analog conversion factor
Output voltage (Load resistance 1 kΩ)
Output impedance
Input voltage
Max. input current
Operating ambient temperature
Weight
AAfter 3 hour storage in darkness
Description / Value
22
300 to 650
375
C-MOS positive logic (Pulse output)
16
Below 100
DC to 50 / DC to 500 B
1 V / 5 × 108 s-1
0 to +10
50
±14 to ±15.5
+150 / -25
+5 to +40
400
Unit
mm
nm
nm
—
ns
s-1
kHz
—
V
Ω
V
mA
°C
g
Description / Value
C-MOS positive logic (Pulse input)
1 µs / 10 µs
50
8
8 bit / Gate
0 to +10 (Analog input)
100 kHz / 1 MHz
16
1
Internal trigger / External trigger
TTL negative logic
USB 1.1
Windows® vista business / 7 Pro
AC 100 to AC 240
+5 to +45
250 (Main body only)
Unit
—
—
Ω
ns
—
V
—
bit
kΩ
—
—
—
—
V
°C
g
BExcluding projecting parts
Data acquisition unit C12918 series
Counter
AD converter
Trigger
Parameter
Signal input level
Gate time
Input impedance
Minimum pulse width
Counter length
Signal input range
Sampling rate
Resolution
Input impedance
Trigger method
External trigger signal
Interface
Compatible OS
Input voltage
Operating ambient temperature
Weight
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2015 Hamamatsu Photonics K.K.
WIDE DYNAMIC RANGE PHOTOMULTIPLIER TUBE UNIT
Figure 1: Typical spectral response
Figure 2: Measurement example
TPMHB0569EA
■Afterglow characteristics of P43 phosphor
CATHODE
RADIANT
SENSITIVITY
10000
TPMOB0271EA
Capable of continuous measurement for 2 ms to 3 ms or more
Measures a wide range from signals
on oscilloscope down to low level light signals
10
1000
COUNT/1 µs
CATHODE RADIANT SENSITIVITY (mA/W)
QUANTUM EFFICIENCY (%)
100
QUANTUM
EFFICIENCY
1
100
ANALOG
MEASUREMENT
10
0.1
SINGLE
PHOTON COUNTING
MEASUREMENT
1
0.01
100
TIME (1 ms/div.)
200
300
400
500
600
700
800
WAVELENGTH (nm)
Figure 3: Block diagram
ANALOG
OUTPUT
PHOTON
AMP.
PMT
USB
ADC
RAM
AMP.
POWER
SUPPLY
PULSE
COMP
SHAPER
COUNTER
DIGITAL
OUTPUT
LLD
PC
WIDE DYNAMIC RANGE
PMT MODULE
H13126
Figure 4: Dimensional outline (Unit: mm)
ANALOG OUTPUT BANDWIDTH SWITCH
●H13126
USB
DATA ACQUISITION UNIT
C12918 SERIES
TPMOB0257EA
ANALOG OUTPUT OFFSET VR
25.0 ± 0.5
59.0 ± 0.5
ANA
PC
: RG-174/U
ANALOG OUTPUT
: RG-174/U
DIGITAL OUTPUT
: AWG26 (GREEN)
Vcont
LOW VOLTAGE INPUT (-15 V) : AWG26 (WHITE)
: AWG26 (BLACK)
GND
LOW VOLTAGE INPUT (+15 V) : AWG26 (RED)
THREADED HOLE FOR OPTION
4 × M2 DEPTH 5
MOUNTING THREADED HOLE
4 × M3 DEPTH 5 *
12.7
40
PC DISCRI VR
DISCRI MONITOR
GND
MOUNTING THREADED HOLE 4 × M3 DEPTH 5 *
EFFECTIVE AREA 22 MIN.
Vcont VR
15.0 ± 0.5
33.0 ± 0.5
25.0 ± 0.5
ANA
25.0 ± 0.5
PC
12.7
+0.1
* The same number of threaded holes are
located at the opposite side
0 - 0.5
Vcont MONITOR
40
108 ± 1
1000 ± 15
50
Vcont SWITCH
5
TPMOA0087EB
●C12918 series
POWER
• Supplied
AC adapter, AC cable**
USB cable, Input signal cable
Trigger cable
CD-R (Sample software, Device driver,
Containing instruction manual)
** C12918-A1: for Japan
C12918-A2: for USA
C12918-A3: for EU
POWER INPUT CONNECTOR
DIGITAL INPUT
TRIGGER INPUT
USB CONNECTOR
36
ANALOG INPUT
96
Windows®
140
ID SWITCH
TACCA0335EA
is a registered trademark of Microsoft Corporation in the United States and / or other countries.
HAMAMATSU PHOTONICS K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected]
TPMO1068E01
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: [email protected]
NOV. 2015 IP
China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected]