VLCS5830 www.vishay.com Vishay Semiconductors High Brightness LED, Ø 5 mm Untinted Non-Diffused Package FEATURES • Untinted non-diffused lens • Utilizing ultrabright AllnGaP technology • Very high luminous intensity • Very small emission angle • High operating temperature: Tj (chip junction temperature) up to 125 °C for AllnGaP devices • Luminous intensity and color categorized for each packing unit 19223 DESCRIPTION • ESD-withstand voltage: Up to 2 kV according to JESD22-A114-B The VLC.58.. series is a clear, non-diffused 5 mm LED for high end applications where supreme luminous intensity and a very small emission angle is required. • AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 These lamps with clear untinted plastic case utilize the highly developed ultrabright AlInGaP technology. APPLICATIONS The very small viewing angle of these devices provide a very high luminous intensity. • Interior and exterior lighting • Outdoor LED panels, displays PRODUCT GROUP AND PACKAGE DATA • Instrumentation and front panel indicators • Product group: LED • Central high mounted stop lights (CHMSL) for motor vehicles • Package: 5 mm • Product series: power • Replaces incandescent lamps • Angle of half intensity: ± 4° • Traffic signals and signs • Light guide design PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) MIN. VLCS5830 Red TYP. 24 000 65 000 MAX. - at IF (mA) 50 WAVELENGTH (nm) MIN. TYP. MAX. 620 624 630 at IF (mA) 50 FORWARD VOLTAGE (V) MIN. TYP. MAX. - 2.2 3.0 at IF (mA) TECHNOLOGY 50 AlInGaP on Si ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLCS5830 PARAMETER TEST CONDITION Reverse voltage (1) DC forward current Surge forward current VALUE UNIT VR 5 V mA Tamb 85°C IF 50 tp 10 μs IFSM 0.1 A PV 150 mW Power dissipation Junction temperature Operating temperature range Storage temperature range Soldering temperature SYMBOL t 5 s, 2 mm from body Thermal resistance junction/ambient Tj 125 °C Tamb - 40 to + 100 °C Tstg - 40 to + 100 °C Tsd 260 °C RthJA 300 K/W Note (1) Driving the LED in reverse direction is suitable for short term application Rev. 1.3, 24-Apr-13 Document Number: 81892 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLCS5830 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLCS5830, RED TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) PARAMETER IF = 50 mA VLCS5830 IV 24 000 65 000 - mcd Dominant wavelength (2) IF = 50 mA d 620 624 630 nm Peak wavelength IF = 50 mA p - 631 - nm Spectral bandwidth at 50 % Irel max. IF = 50 mA - 18 - nm Angle of half intensity IF = 50 mA - ±4 - deg Forward voltage (3) IF = 50 mA VF - 2.2 3.0 V Reverse voltage IR = 10 μA VR 5 - - V Temperature coefficient of VF IF = 50 mA TCVF - -2 - mV/K Temperature coefficient of d IF = 50 mA TCd - 0.05 - nm/K Notes (1) In one packing unit I Vmax./IVmin. 2.0 (2) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of ± 1 nm (3) Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of ± 0.05 V LUMINOUS INTENSITY CLASSIFICATION LIGHT INTENSITY (mcd) GROUP MIN. MAX. RR 24 000 48 000 SS 32 000 64 000 TT 43 000 86 000 UU 57 500 115 000 VV 72 000 150 000 WW 100 000 200 000 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one reel. In order to ensure availability, single wavelength groups will not be orderable. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0° 60 10° 20° 40 red 30 20 10 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 0 0 20 40 60 80 100 120 0.6 16710_2 Tamb - Ambient Temperature (°C) Fig. 1 - Maximum Permissible Forward Current vs. Ambient Temperature Rev. 1.3, 24-Apr-13 ϕ - Angular Displacement IV rel - Relative Radiant Intensity IF - Forward Current (mA) 30° 50 0.4 0.2 95 10022 Fig. 2 - Relative Intensity vs. Angular Displacement Document Number: 81892 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLCS5830 www.vishay.com 1.2 0.8 0.6 0.4 0.2 0.0 - 0.2 500 540 580 620 660 700 740 780 λ- Wavelength (nm) 21412 Fig. 3 - Relative Intensity vs. Wavelength 100 IF - Forward Current (mA) 90 80 70 60 50 40 30 20 10 0 1.5 21414 2.0 2.5 VF - Forward Voltage (V) 6 4 2 0 -2 -4 -6 -8 0 20 40 60 80 100 IF - Forward Current (mA) Fig. 6 - Change of Dominant Wavelength vs. Forward Current 700 600 500 400 300 200 100 0 - 100 - 200 - 300 - 400 - 500 - 50 - 25 0 25 50 75 100 125 Tamb - Ambient Temperature (°C) 21416 Fig. 4 - Forward Current vs. Forward Voltage Fig. 7 - Change of Forward Voltage vs. Ambient Temperature 1.8 IV rel - Relative Luminous Intensity 10 IV rel - RelativeLuminous Intensity 8 21418 ΔVF - Change of Forward Voltage (mV) Irel - Relative Intensity 1.0 Δλd - Change Dominant Wavelength (nm) Vishay Semiconductors 1 0.1 21415 10 100 IF - Forward Current (mA) Fig. 5 - Relative Luminous Intensity vs. Forward Current Rev. 1.3, 24-Apr-13 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 - 50 - 25 0.01 1 1.6 21413 0 25 50 75 100 125 Tamb - Ambient Temperature (°C) Fig. 8 - Relative Luminous Intensity vs. Ambient Temperature Document Number: 81892 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLCS5830 Δλd - Change Dominant Wavelength (nm) www.vishay.com Vishay Semiconductors 8 6 4 2 0 -2 -4 -6 -8 -50 21417 -25 0 25 50 75 100 125 Tamb - Ambient Temperature (°C) Fig. 9 - Change of Dominant Wavelength vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters A ± 0.3 8.7 < 0.7 ± 0.15 7.7 Parabolic lens 35.7 ± 0.55 12.7 ± 0.3 (4.9) Ø 5.5 ± 0.15 C Area not plane Ø 5 ± 0.15 ± 0.25 1 min. 1.1 0.5 Drawing-No.: 6.544-5310.01-4 Issue: 4; 19.05.09 + 0.15 - 0.05 0.5 + 0.15 - 0.05 technical drawings according to DIN specifications 2.54 nom. 95 11476 Rev. 1.3, 24-Apr-13 Document Number: 81892 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000