TLUR44K1L2 Datasheet

TLUR44K1L2
www.vishay.com
Vishay Semiconductors
Universal LED in Ø 3 mm Tinted Diffused Package
FEATURES
• For DC and pulse operation
• Luminous intensity categorized
• Standard Ø 3 mm (T-1) package
• ESD-withstand voltage: up to 2 kV according to
JESD22-A114-B
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
19220
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
APPLICATIONS
• Package: 3 mm
• General indicating and lighting purposes
• Product series: standard
• Angle of half intensity: ± 30°
PARTS TABLE
PART
COLOR
TLUR44K1L2
LUMINOUS INTENSITY
(mcd)
Red
MIN.
TYP.
MAX.
7.1
-
18
at IF
(mA)
10
WAVELENGTH
(nm)
MIN.
TYP. MAX.
624
630
636
at IF
(mA)
FORWARD VOLTAGE
(V)
MIN.
TYP.
MAX.
-
1.9
2.6
10
at IF
(mA)
TECHNOLOGY
10
GaAsP on GaP
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
TLUR44K1L2
PARAMETER
SYMBOL
VALUE
Reverse voltage(1)
VR
6
V
DC forward current
IF
20
mA
IFSM
0.5
A
Surge forward current
TEST CONDITION
tp ≤ 10 μs
UNIT
Power dissipation
PV
60
mW
Junction temperature
Tj
100
°C
Operating temperature range
Tamb
-40 to +100
°C
Storage temperature range
Tstg
-55 to +100
°C
Tsd
260
°C
RthJA
500
K/W
Soldering temperature
t ≤ 5 s, 2 mm from body
Thermal resistance junction/ambient
Note
(1) Driving the LED in reverse direction is suitable for a short term application
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLUR44K1L2, RED
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
Luminous intensity
IF = 10 mA
TLUR44K1L2
IV
7.1
-
18
mcd
Dominant wavelength
IF = 10 mA
λd
624
630
636
nm
Peak wavelength
IF = 10 mA
λp
-
640
-
nm
deg
Angle of half intensity
IF = 10 mA
ϕ
-
± 30
-
Forward voltage
IF = 10 mA
VF
-
1.9
2.6
V
Reverse voltage
IR = 10 μA
VR
6
15
-
V
VR = 0 V, f = 1 MHz
Cj
-
50
-
pF
Junction capacitance
Rev. 1.2, 14-Oct-14
Document Number: 82398
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLUR44K1L2
www.vishay.com
Vishay Semiconductors
LUMINOUS INTENSITY CLASSIFICATION
GROUP
LIGHT INTENSITY (mcd)
STANDARD
MIN.
MAX.
K1
7.10
9.00
K2
9.00
11.20
L1
11.20
14.00
L2
14.00
18.00
Note
• Luminous intensity is tested at a current pulse duration of 25 ms
and an accuracy of ± 11 %.
The above type numbers represent the order groups which
include only a few brightness groups. Only one group will be
shipped on each reel (there will be no mixing of two groups on
each reel).
In order to ensure availability, single brightness groups will not
be orderable.
In a similar manner for colors where wavelength groups are
measured and binned, single wavelength groups will be shipped
on any one reel.
In order to ensure availability, single wavelength groups will not
be orderable.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1.2
40
red
1.0
Irel - Relative Intensity
I F - Forward Current (mA)
35
30
25
20
15
10
5
0
0
0.2
20°
40°
0.9
50°
0.8
60°
70°
0.7
630
670
710
750
λ - Wavelength (nm)
100
30°
1.0
590
Fig. 3 - Relative Intensity vs. Wavelength
IF - Forward Current (mA)
IV rel - Relative Luminous Intensity
10°
0.4
17521
Fig. 1 - Forward Current vs. Ambient Temperature
0°
0.6
0.0
550
10 20 30 40 50 60 70 80 90 100
Tamb - Ambient Temperature (°C)
17517
0.8
super red
10
1
80°
0.1
0.6
0.4
0.2
0
0.2
0.4
95 10042
Fig. 2 - Relative Luminous Intensity vs. Angular Displacement
Rev. 1.2, 14-Oct-14
0
0.6
16634
1
2
3
4
5
VF - Forward Voltage (V)
Fig. 4 - Forward Current vs. Forward Voltage
Document Number: 82398
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLUR44K1L2
www.vishay.com
Vishay Semiconductors
1.6
IV rel - RelativeLuminous Intensity
IV rel - Relative Luminous Intensity
10
red
1
0.1
red
1.2
0.8
0.4
IF = 10 mA
0
0.01
1
95 10076
10
0
100
IF - Forward Current (mA)
Fig. 5 - Relative Luminous Intensity vs. Forward Current
95 10074
20
40
60
80
100
Tamb - Ambient Temperature (°C)
Fig. 6 - Relative Luminous Intensity vs. Ambient Temperature
PACKAGE DIMENSIONS in millimeters
C
Ø 3.2 ± 0.15
A
AREA NOT PLANE
5.8 ± 0.3
34.4 ± 0.5
< 0.6
(2.5)
3.4 ± 0.15
4.4 ± 0.3
R1.4 (sphere)
Ø 2.9 ± 0.15
2.54 nom.
1.5 ± 0.5
+ 0.15
+ 0.2
0.5 - 0.1
0.4 - 0.05
technical drawings
according to DIN
specifications
Drawing-No.: 6.544-5255.01-4
Issue: 9; 28.07.14
Rev. 1.2, 14-Oct-14
Document Number: 82398
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000