TLWR9600 www.vishay.com Vishay Semiconductors TELUX LED FEATURES • High luminous flux • Supreme heat dissipation: RthJP is 90 K/W • High operating temperature: Tamb = -40 °C to +110 °C • Meets SAE and ECE color requirements for the automobile industry for color red • Packed in tubes for automatic insertion 19232 • Luminous flux, forward voltage, and color categorized for each tube DESCRIPTION The TELUX series is a clear, non diffused LED for applications where supreme luminous flux is required. • Small mechanical tolerances allow precise usage of external reflectors or lightguides It is designed in an industry standard 7.62 mm square package utilizing highly developed (AS) AllnGaP technology. • Compatible with wave solder processes according to CECC 00802 and J-STD-020 The supreme heat dissipation of TELUX allows applications at high ambient temperatures. • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B All packing units are binned for luminous flux, forward voltage, and color to achieve the most homogenous light appearance in application. • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 SAE and ECE color requirements for automobile application are available for color red. APPLICATIONS ESD resistivity 2 kV (HBM) according to MIL STD 883D, method 3015.7. • Exterior lighting • Dashboard illumination PRODUCT GROUP AND PACKAGE DATA • Tail-, stop-, and turn signals of motor vehicles • Product group: LED • Replaces small incandescent lamps • Package: TELUX • Traffic signals and signs • Product series: power • Angle of half intensity: ± 30° PARTS TABLE PART LUMINOUS FLUX (mlm) MIN. at IF WAVELENGTH (nm) at IF (mA) (mA) TYP. MAX. MIN. TYP. MAX. 2500 3900 COLOR TLWR9600 Red - 70 611 616 634 70 FORWARD VOLTAGE (V) MIN. TYP. MAX. 1.83 2.2 2.67 at IF (mA) TECHNOLOGY 70 AlInGaP on GaAs ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TLWR9600 PARAMETER Reverse voltage DC forward current Surge forward current Power dissipation TEST CONDITION SYMBOL VALUE IR = 100 μA VR 10 V Tamb ≤ 85 °C IF 70 mA tp ≤ 10 μs IFSM 0.1 A Tamb ≤ 85 °C PV 187 mW Junction temperature Operating temperature range Storage temperature range UNIT Tj 125 °C Tamb -40 to +110 °C Tstg -55 to +110 °C Soldering temperature t ≤ 5 s, 1.5 mm from body preheat temperature 100 °C / 30 s Tsd 260 °C Thermal resistance junction / ambient With cathode heatsink of 70 mm2 RthJA 200 K/W Document Number: 83214 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.8, 07-Oct-15 TLWR9600 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLWR9600, RED PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. Total flux IF = 70 mA, RthJA = 200 K/W φV 2500 3900 - UNIT mlm Luminous intensity/total flux IF = 70 mA, RthJA = 200 K/W IV/φV - 0.8 - mcd/mlm Dominant wavelength IF = 70 mA, RthJA = 200 K/W λd 611 616 634 nm Peak wavelength IF = 70 mA, RthJA = 200 K/W λp - 624 - nm Angle of half intensity IF = 70 mA, RthJA = 200 K/W ϕ - ± 30 - deg Total included angle 90 % of total flux captured ϕ0.9 V - 75 - deg Forward voltage IF = 70 mA, RthJA = 200 K/W VF 1.83 2.2 2.67 V Reverse voltage IR = 100 μA VR 10 20 - V Temperature coefficient of < λdom IF = 70 mA TCλdom - 17 - nm/K IF = 70 mA, T > -25 °C TCVF - -2.9 - mV/K Temperature coefficient of VF FORWARD VOLTAGE CLASSIFICATION GROUP FORWARD VOLTAGE (V) MIN. MAX. Y 1.83 2.07 Z 1.95 2.19 0 2.07 2.31 1 2.19 2.55 2 2.31 2.55 3 2.43 2.67 4 2.55 2.79 5 2.67 2.91 6 2.79 3.03 Note • Voltages are tested at a current pulse duration of 1 ms and a accuracy of ± 0.1 V. COLOR CLASSIFICATION GROUP LUMINOUS FLUX CLASSIFICATION GROUP LUMINOUS FLUX (mlm) MIN. MAX. E 2500 3600 F 3000 4200 G 3500 4800 Note • Luminous flux is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each tube (there will be no mixing of two groups on each tube). In order to ensure availability, single brightness groups will be not orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one tube. In order to ensure availability, single wavelength groups will not be orderable. DOM. WAVELENGTH (nm) MIN. MAX. 1 611 618 2 614 622 3 616 634 Note • Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± 1 nm: Document Number: 83214 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.8, 07-Oct-15 TLWR9600 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 100 100 red 80 Total Luminous Flux (%) IF - Forward Current (mA) 80 60 40 20 60 40 20 RthJA = 200 K/W 0 0 0 20 40 60 80 100 0 120 Tamb - Ambient Temperature (°C) 15983 16005 0.12 230 0.10 220 75 100 125 Total Included Angle (Degrees) Padsize 8 mm2 per anode pin 210 0.005 0.05 0.5 0.08 50 Fig. 4 - Percentage Total Luminous Flux vs. Total Included Angle for 60° Emission Angle RthJA (K/W) I F - Forward Current (A) Fig. 1 - Forward Current vs. Ambient Temperature 25 0.06 0.04 200 190 180 0.02 170 0.00 10 -5 160 10 -4 10 -3 10 -2 10 -1 100 101 102 0 tp - Pulse Length (ms) 16731 16009 10° 100 150 200 250 300 Cathode Padsize (mm2) Fig. 5 - Thermal Resistance Junction Ambient vs. Cathode Padsize Fig. 2 - Forward Current vs. Pulse Length 0° 50 20° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement IV rel. - Relative Luminous Intensity 30° 80° 0.6 0.4 0.2 0 16006 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Document Number: 83214 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.8, 07-Oct-15 TLWR9600 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters C Cathode marking technical drawings according to DIN specifications Area not plane A R1 1.6 2.65 ± 0.3 0.6 max. 1.32 4.65 ± 0.3 7.75 ± 0.3 1.45 R1.22 1.36 ± 0.1 5° 0.76 ± 0.1 0.4 ± 0.1 5.08 ± 0.3 1.55 ± 0.2 7.62 ± 0.3 6.55 5.08 ± 0.2 7.62 ± 0.3 Drawing-No.: 6.544-5321.02-4 Issue: 4; 25.07.14 Document Number: 83214 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.8, 07-Oct-15 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000