Tyco/Electronics PRODUCT: RHE600 Raychem Circuit Protection DOCUMENT: SCD 24258 PCN: 626189 REV LETTER: F REV DATE: OCTOBER 8, 2001 PAGE NO.: 1 OF 1 PolySwitch® PTC Devices 308 Constitution Drive Menlo Park, CA 94025 800-227-4856 FAX 800-227-4866 Overcurrent Protection Device Specification Status: RELEASED Electrical Rating Voltage: 16V MAX Current: 100A MAX INSULATING MATERIAL: Cured, Flame Retarded Epoxy Polymer LEAD MATERIAL: 20 AWG Tin/Lead Plated Copper (0.8 mm [0.032] nom. diameter) PART MARKING: Raychem Logo and Voltage 16 H6 Part Identification Lot Identification (can be on back) TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX -11.2 -21.0 -(0.44) -(0.83) *Rounded off approximation C MIN 4.3 (0.17) D MAX 5.8 (0.23) MIN 7.6 (0.30) E MAX --- MIN --- MAX 3.0 (0.12) F TYP 1.2 (0.05) TABLE II. PERFORMANCE RATINGS: I HOLD CURRENT RATINGS TIME TO TRIP RESISTANCE AMPS 25°C HOLD 6.00 AMPS AMPS AMPS AT 0°C AT 25°C AT 60°C HOLD TRIP HOLD TRIP HOLD TRIP --6.0 10.8 --- SECONDS AT 25°C, 30 A MAX 5.0 OHMS AT 25°C MIN MAX 0.013 0.032 Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: TRIPPED-STATE POWER DISSIPATION WATTS AT 25°C TYP 4.1 UL, TUV, CSA recognized. PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.