Tyco/Electronics PRODUCT: RHE1500 DOCUMENT: SCD 24886 PCN: 774393 REV LETTER: A REV DATE: SEPTEMBER 25, 2001 PAGE NO.: 1 OF 1 Raychem Circuit Protection PolySwitch® PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 800-227-4856 FAX 800-227-4866 Overcurrent Protection Device Specification Status: RELEASED Electrical Rating Voltage: 16VDC MAX Current: 100A MAX INSULATING MATERIAL: Cured, Flame Retarded Epoxy Polymer meets UL94 V-0 Requirements LEAD MATERIAL: 18 AWG Tin/Lead Plated Copper PART MARKING: Raychem Logo and Voltage 16 H15 Part Identification Lot Identification (can be on back) TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX -23.5 -28.7 -(0.925) -(1.13) *Rounded off approximation C MIN 9.4 (0.37) D MAX 10.9 (0.43) MIN 7.6 (0.30) E MAX --- MIN --- MAX 3.6 (0.14) F TYP 1.4 (0.06) TABLE II. PERFORMANCE RATINGS: I HOLD AMPS 25°C HOLD 15.0 CURRENT RATINGS AMPS AT 0°C HOLD TRIP --- Reference Documents: Precedence: Effectivity: CAUTION: AMPS AMPS AT 25°C AT 60°C HOLD TRIP HOLD TRIP 15.0 28.0 --- TIME TO TRIP RESISTANCE SECONDS AT 25°C,75A MAX 20.0 OHMS AT 25°C MIN MAX 0.0032 0.0092 TRIPPED-STATE POWER DISSIPATION WATTS AT 25°C, 16V TYP 7.0 PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.