Tyco/Electronics PRODUCT: RHE070 Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 800-227-4856 FAX 800-227-4866 DOCUMENT: SCD 24586 PCN: 112938 REV LETTER: E REV DATE: OCTOBER 8, 2001 PAGE NO.: 1 OF 1 PolySwitch® PTC Devices Overcurrent Protection Device Specification Status: RELEASED Electrical Rating Voltage: 16V DC MAX Current: 40A MAX INSULATING MATERIAL: Cured, Flame Retarded Epoxy Polymer meets UL94 V-0 Requirements LEAD MATERIAL: 24 AWG Tin/Lead Plated Copper Clad Steel PART MARKING: Raychem Logo and Voltage 16 H0.7 Part Identification Lot Identification (can be on back) TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX -6.86 -10.80 -(0.270) -(0.425) *Rounded off approximation C MIN 4.31 (0.170) D MAX MIN 5.84 7.62 (0.230) (0.300) E MAX --- MIN --- MAX 3.04 (0.120) F TYP 1.27 (0.05) TABLE II. PERFORMANCE RATINGS: I HOLD CURRENT RATINGS TIME TO TRIP RESISTANCE AMPS 25°C HOLD 0.70 AMPS AT 25°C HOLD TRIP 0.70 1.40 SECONDS AT 25°C, 3.5 A MAX 4.0 OHMS AT 25°C MIN MAX 0.3 0.8 Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: TRIPPED-STATE POWER DISSIPATION WATTS AT 25°C, 16V TYP 1.4 UL , TUV, CSA recognized. PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invi tation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.