VS-2KBP Series Datasheet

VS-2KBP Series
www.vishay.com
Vishay Semiconductors
Single Phase Rectifier Bridge, 2 A
FEATURES
• Suitable for printed circuit board mounting
• Compact construction
• High surge current capability
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
D-44
PRODUCT SUMMARY
IO
2A
VRRM
50 to 1000 V
Package
D-44
Circuit
Single phase bridge
A 2 A single phase encapsulated bridge rectifier consisting
of four single diodes connected as a full bridge. They are
intended for general applications in industrial and consumer
equipment.




MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
CHARACTERISTICS
IO
IFSM
I2t
VALUES
UNITS
2.0
A
50 Hz
60
60 Hz
63
50 Hz
18
60 Hz
16
A
A2s
VRRM
50 to 1000
V
TJ
-40 to 150
°C
ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
PART NUMBER
VRSM, MAXIMUM
VRRM, MAXIMUM REPETITIVE
NON-REPETITIVE PEAK REVERSE
PEAK REVERSE VOLTAGE
VOLTAGE
(V)
(V)
VRMS, MAXIMUM RECOMMENDED
RMS SUPPLY VOLTAGE
(V)
VS-2KBP005
50
50
20
VS-2KBP02
200
200
80
VS-2KBP04
400
400
125
VS-2KBP06
600
600
250
VS-2KBP08
800
800
380
VS-2KBP10
1000
1000
500
Revision: 04-Apr-14
Document Number: 93562
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-2KBP Series
www.vishay.com
Vishay Semiconductors
FORWARD CONDUCTION
PARAMETER
SYMBOL
Maximum DC output current
IO
Maximum peak one cycle,
non-repetitive surge current
IFSM
TEST CONDITIONS
TA = 50 °C, resistive or inductive load
2.0
TA = 50 °C, capacitive load
1.8
t = 10 ms, 20 ms
Following any rated load condition
and with rated VRRM reapplied
60
100 % VRRM
reapplied
18
t = 8.3 ms, 16.7 ms
t = 10 ms
Maximum I2t capability for fusing
t = 8.3 ms
I2t
t = 10 ms
UNITS
A
A
63
Initial 
TJ = TJ maximum
16
A2s
26
No voltage
reapplied
t = 8.3 ms
23
I2t
t = 0.1 to 10 ms, no voltage reapplied
255
A2s
Maximum peak forward voltage per diode
VFM
IFM = 1 A, TJ = 25 °C
1.0
V
Typical peak reverse leakage 
current per diode
TJ = 25 °C, 100 % VRRM
10
μA
IRM
TJ = 150 °C, 100 % VRRM
1.0
mA
40 to 1000
Hz
Maximum
I2t
VALUES
capability for fusing
Operating frequency range
f
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
Operating junction and storage temperature range
SYMBOL
VALUES
UNITS
TJ, TStg
-40 to 150
°C
4
g
0.14
oz.
Approximate weight
Maximum Peak Output Current (A)
Average Output Current (A)
2.2
2.0
Resistive, inductive load
1.8
1.6
1.4
1.2
Capacitive load
1.0
0.8
0.6
0.4
0.2
0
0
20
40
60
80
100
120
140
160
70
60
50
From any rated
load condition
40
30
20
10
0
10-2
10-1
1
Maximum Allowable Ambient Temperature (°C)
Pulse Train Duration (s)
Fig. 1 - Ambient Temperature Ratings
Fig. 2 - Non-Repetitive Surge Ratings
10
Revision: 04-Apr-14
Document Number: 93562
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-2KBP Series
www.vishay.com
Vishay Semiconductors
CIRCUIT CONFIGURATION
IO
+
~
~
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95329
Revision: 04-Apr-14
Document Number: 93562
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
Vishay Semiconductors
D-44
DIMENSIONS in millimeters (inches)
22 (0.87)
15 (0.59)
+
3.8 (0.15)
~
17.5 (0.69)
3.8 (0.15)
~
3.8 (0.15)
6.8 (0.27)
Ø 0.75
(0.030)
Document Number: 95329
Revision: 04-Jul-08
For technical questions, contact: [email protected]
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000