2KBP005M THRU 2KBP10M SERIES 3N253 THRU 3N259 GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes FEATURES Case Style KBPM ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ This series is UL listed under the Recognized Component Index, file number E54214 ♦ Glass passivated chip junctions ♦ Typical IR less than 0.1µA ♦ High case dielectric strength ♦ Ideal for printed circuit boards ♦ High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs. (2.3kg) tension 0.600 (15.24) 0.560 (14.22) 0.125 x 45o (3.2) 0.460 (11.68) 0.500 (12.70) 0.460 (11.68) 0.420 (10.67) 0.50 (12.7) MIN. 60 (15.2) MIN. 0.060 (1.52) 0.034 (8.6) 0.028 (7.6) DIA. 0.160 (4.1) 0.140 (3.6) MECHANICAL DATA 0.105 (2.67) 0.085 (2.16) 0.200 (5.08) 0.180 (4.57) Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.06 ounce, 1.7 grams Polarity shown on front side of case: positive lead by beveled corner Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS 2KBP 005M 3N253 2KBP 01M 3N254 * Maximum repetitive peak reverse voltage VRRM 50 100 200 400 * Maximum RMS voltage VRMS 35 70 140 280 * Maximum DC blocking voltage VDC 50 100 200 400 600 * Maximum average forward output rectified current at TA=55°C I(AV) 2.0 Amps * Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) TJ=150°C IFSM 60.0 Amps I2t 15.0 A2sec * Maximum instantaneous forward voltage drop per leg at 3.14A VF 1.1 Volts * Maximum DC reverse current at rated DC blocking voltage per leg IR 5.0 500.0 µA Rating for fusing (t < 8.3ms) TA=25°C TA=125°C Typical junction capacitance per leg (NOTE 1) Typical thermal resistance per leg (NOTE 2) * Operating junction and storage temperature range 2KBP 02M 3N255 2KBP 04M 3N256 2KBP 06M 3N257 2KBP 08M 3N258 2KBP 10M 3N259 UNITS 600 800 1000 Volts 420 560 700 Volts 800 1000 Volts CJ 25.0 pF RΘJA RΘJL 30.0 11.0 °C/W TJ, TSTG -55 to +165 °C NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.47 x 0.47” (12 x 12mm) copper pads * JEDEC registered values 4/98 RATINGS AND CHARACTERISTICS CURVES 3N253 THRU 3N259 / 2KBP005M THRU 2KBP10M FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG FIG. 1 - DERATING CURVE OUTPUT RECTIFIED CURRENT 60 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES 2.0 60 HZ RESISTIVE OR INDUCTIVE LOAD 1.5 P.C.B. MOUNTED WITH 0.47 x 0.47” (12 x 12mm) COPPER PADS 1.0 CAPACITIVE LOAD Ipk/IAV=5.0 Ipk/IAV=10 Ipk/IAV=20 (PER LEG) 0.5 0 20 40 60 50 40 30 20 10 1.0 CYCLE 0 80 100 120 140 TJ=150°C SINGLE SINE-WAVE (JEDEC Method) 1 10 100 NUMBER OF CYCLES AT 60 HZ 160 170 AMBIENT TEMPERATURE, °C FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG FIG. 3 - TYPICAL FORWARD CHARACTERISTICS PER LEG TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 10 INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 20 1 0.1 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG JUNCTION CAPACITANCE, pF 100 TJ=25°C f=1.0 MHz Vsig=50mVp-p 10 1 10 REVERSE VOLTAGE, VOLTS TJ=125°C 10 TJ=100°C 1 0.1 TJ=25°C 0.01 0 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % INSTANTANEOUS FORWARD VOLTAGE, VOLTS 1 0.1 100 100 100