14,48 7,67 0,86 6,4 threaded bolt : Nietmutter / 3,1 #4-40 0,3 12,5 M3 oder/ or 0,2 10,8 Gewindebolzen / cross section A-A M3 oder/ or A Schnitt A-A / 5,94 riveted nut : 3,1 #4-40 14,48 7,3 2 6,3 3,7 53 0,3 7,3 6,3 -0,3 41,3 1,5 A 0,3 3,75 11,8 15 Rohrniet / rivet : Nietmutter mit Klemmteil clamping thread: 134274 3,3 7,3 7,3 8 +0,2 M3 3,1 5,8 38,5 -0,2 47 Polzahl / No. of contacts : Anschlußart / Zubehör / Angled solder Terminal Length : Type : Logo : Information: Class : 207=0.8µm (30 µin) Au CONTACT, TIN/LEAD TERMINAL ERNI Accessory : Sonderausführung / Leiterplattenlochbild 134982 / - 5W5 Anforderungsstufe / Aufdruck / Refer to table on page 2 Terminal Type : Anschlußlänge / Bauart / Refer to table on page 2 Part No. : Refer to table on page 2 Special : Refer to table on page 2 Board hole pattern 134982 Tolerances Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 Ident-Nr. / 0,2 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date TMC-S 5W5-LP07-5 TMC-S 5W5-LP07-5 www.ERNI.com Index Designation M:00022984.SZN 054995 TMCS TMC S I Ordering Information D-Sub Connector High Power Solder Right Angle Female Number of Pins 5W5 Accessory Termination Side: Rivet nut M3 134493 Accessory Termination Side: Rivet nut #4-40 134494 www.erni.com