Schnitt A-A / A 3,1 1,5 riveted nut : 3,1 3,7 13,72 6,3 Nietmutter / #4-40 M3 oder/ or 0,3 12,5 6,3 -0,3 6,4 threaded bolt : 7,3 0,2 4,75 A 10,8 Gewindebolzen / cross section A-A #4-40 0,3 M3 oder/ or 27,5 7,3 0,3 2 39,1 3,75 11,8 15 Rohrniet / 134274 Nietmutter mit Klemmteil clamping thread: rivet : 3,3 Polzahl / -0,2 33,3 0,2 Refer to table on page 2 Part No. : No. of contacts : Anschlußart / Refer to table on page 2 Angled soldering Terminal Type : Anschlußlänge / Terminal Length : Bauart / 3W3 Type : Anforderungsstufe / Aufdruck / Zubehör / Logo : Sonderausführung / 207=0.8µm (30 µin) Au CONTACT, TIN/LEAD TERMINAL ERNI Refer to table on page 2 Special : Board hole pattern 134100 Information: Class : Accessory : Leiterplattenlochbild 134100 / Refer to table on page 2 Tolerances Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 Ident-Nr. / 24,7 7,3 7,3 8 -0,2 M3 3,1 5,8 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. 15.05.2001 Date TMC-S 3W3-LP07-3 TMC-S 3W3-LP07-3 www.ERNI.com b Index Designation M:00023002.SZN 054941 TMCS I Ordering Information D-Sub Connector High Power Solder Right Angle Female Number of Pins 3W3 Accessory Termination Side: Rivet nut M3 134468 Accessory Termination Side: Rivet nut #4-40 134469 www.erni.com