22,86 22,86 15,24 Schnitt A-A / 16,51 10,16 0,3 69,3 0,3 7,3 1,5 3,1 #4-40 3,1 riveted nut : 3,7 6,3 -0,3 58 Nietmutter / 2 M3 oder/ or 0,3 12,5 6,4 7,3 0,2 A 10,8 2,54 threaded bolt : M3 oder/ or Gewindebolzen / 3,81 A #4-40 8,89 cross section A-A 6,3 11,8 3,75 15 Rohrniet / rivet : Nietmutter mit Klemmteil clamping thread: 3,3 5,8 M3 7,3 7,3 8 -0,2 3,1 134274 54,9 -0,2 63,5 Polzahl / Refer to table on page 2 Part No. : No. of contacts : Anschlußart / Refer to table on page 2 Angled solder Terminal Type : Leiterplattenlochbild 134983 / Anschlußlänge / Terminal Length : Bauart / 8W8 Type : Anforderungsstufe / Aufdruck / Zubehör / Logo : 207=0.8µm (30 µin) Au CONTACT, TIN/LEAD TERMINAL ERNI Accessory : Sonderausführung / Information: Class : Refer to table on page 2 Special : Board hole pattern 134983 - Refer to table on page 2 Tolerances Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 Ident-Nr. / 0,2 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date TMC-S 8W8-LP07-8 TMC-S 8W8-LP07-8 www.ERNI.com Index Designation M:00022985.SZN 054996 TMCS I Ordering Information D-Sub Connector High Power Solder Right Angle Female Number of Pins 8W8 Accessory Termination Side: Rivet nut M3 134495 Accessory Termination Side: Rivet nut #4-40 134496 www.erni.com