VLHW4400-JKPL, VLHW4400-LKNL, VLHW4400-QPMM www.vishay.com Vishay Semiconductors Ultrabright White LED, Ø 3 mm FEATURES • Diffused, untinted lens • Utilizing ultrabright InGaN technology • High luminous intensity • Luminous intensity and color categorized for each packing unit • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B 19222 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION The VLHW4400 is a diffused, untinted 3 mm LED for high end applications where supreme luminous intensity is required. APPLICATIONS • Interior and exterior lighting These lamps utilize the highly developed ultrabright InGaN technologies. • Outdoor LED panels The lens and the viewing angle is optimized to achieve best performance of light output and visibility. • Replaces incandescent lamps • Instrumentation and front panel indicators • Light guide compatible PRODUCT GROUP AND PACKAGE DATA • Product group: LED • Package: 3 mm • Product series: standard • Angle of half intensity: ± 30° PARTS TABLE PART LUMINOUS INTENSITY (mcd) COLOR at IF (mA) MIN. TYP. MAX. COORDINATE (x, y) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF (mA) TECHNOLOGY MIN. TYP. MAX. VLHW4400-JKPL Cool white 560 900 1400 5 - 0.33, 0.33 VLHW4400-LKNL Cool white 560 900 1400 5 - 0.33, 0.33 - 5 2.6 2.8 3.2 5 InGaN and converter VLHW4400-QPMM Warm white 450 800 1125 5 - 0.44, 0.41 - 5 2.6 2.8 3.2 5 InGaN and converter - 5 2.6 2.8 3.2 5 InGaN and converter ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLHW4400-JKPL, VLHW4400-LKNL, VLHW4400-QPMM PARAMETER SYMBOL VALUE Reverse voltage VR 5 V DC forward current IF 20 mA IFSM 0.1 A PV 85 mW Peak forward current TEST CONDITION at 1 kHz, tp/T = 0.1 Power dissipation Junction temperature UNIT Tj +120 °C Operating temperature range Tamb -40 to +85 °C Storage temperature range Tstg -40 to +85 °C Tsd 260 °C RthJA 400 K/W Soldering temperature Thermal resistance junction/ambient Rev. 1.0, 21-Oct-13 t≤5s Document Number: 82565 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLHW4400-JKPL, VLHW4400-LKNL, VLHW4400-QPMM www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLHW4400-JKPL, VLHW4400-LKNL, COOL WHITE PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity IF = 5 mA IV 560 900 1400 mcd Chromatically coordinate x acc. to CIE 1931 IF = 5 mA x - 0.33 - Chromatically coordinate y acc. to CIE 1931 IF = 5 mA y - 0.33 - Angle of half intensity IF = 5 mA ϕ - ± 30 - deg Forward voltage (1) IF = 5 mA VF 2.6 2.8 3.2 V Reverse current VR = 5 V IR - - 10 μA Note (1) Forward voltage is tested at a current pulse duration of 1 ms and a tolerance of ± 0.1 V OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLHW4400-QPMM, WARM WHITE PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity IF = 5 mA IV 450 800 1125 mcd Chromatically coordinate x acc. to CIE 1931 IF = 5 mA x - 0.44 - Chromatically coordinate y acc. to CIE 1931 IF = 5 mA y - 0.41 - Angle of half intensity IF = 5 mA ϕ - ± 30 - deg IF = 5 mA VF 2.6 2.8 3.2 V VR = 5 V IR - - 10 μA Forward voltage (1) Reverse current Note Forward voltage is tested at a current pulse duration of 1 ms and a tolerance of ± 0.1 V (1) Rev. 1.0, 21-Oct-13 Document Number: 82565 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLHW4400-JKPL, VLHW4400-LKNL, VLHW4400-QPMM www.vishay.com Vishay Semiconductors CHROMATICALLY COORDINATED CLASSIFICATION (Tamb = 25 °C, unless otherwise specified) COOL WHITE X Y X Y 0.2960 0.2590 0.3189 0.3302 0.2910 0.2680 0.3288 0.3452 JK ML 0.3005 0.2825 0.3288 0.3282 0.3045 0.2715 0.3197 0.3131 0.2910 0.2680 0.3288 0.3081 0.2850 0.2790 0.3288 0.3282 JL NK 0.2960 0.2955 0.3386 0.3426 0.3005 0.2825 0.3386 0.3235 0.3045 0.2715 0.3288 0.3282 0.3005 0.2825 0.3288 0.3453 KK NL 0.3100 0.2970 0.3386 0.3591 0.3130 0.2840 0.3386 0.3426 0.3005 0.2825 0.3386 0.3235 0.2960 0.2955 0.3386 0.3426 KL OK 0.3070 0.3120 0.3484 0.3571 0.3100 0.2970 0.3484 0.3388 0.3100 0.2970 0.3386 0.3426 0.3197 0.3131 0.3386 0.3591 LK OL 0.3205 0.2956 0.3484 0.3730 0.3130 0.2840 0.3484 0.3571 0.3070 0.3120 0.3484 0.3388 0.3189 0.3302 0.3484 0.3571 LL PK 0.3197 0.3131 0.3582 0.3715 0.3100 0.2970 0.3582 0.3542 0.3197 0.3131 0.3484 0.3571 0.3288 0.3282 0.3484 0.3730 MK PL 0.3288 0.3081 0.3582 0.3792 0.3205 0.2956 0.3582 0.3715 Note • Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of ± 0.01. Rev. 1.0, 21-Oct-13 Document Number: 82565 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLHW4400-JKPL, VLHW4400-LKNL, VLHW4400-QPMM www.vishay.com Vishay Semiconductors CHROMATICALLY COORDINATED CLASSIFICATION (Tamb = 25 °C, unless otherwise specified) WARM WHITE QM QN QO QP PM PN PO PP X Y X Y 0.421 0.433 0.452 0.443 0.437 0.438 0.469 0.448 0.430 0.421 0.460 0.431 0.415 0.416 0.444 0.426 0.415 0.416 0.444 0.426 0.430 0.421 0.460 0.431 0.423 0.405 0.451 0.414 0.409 0.400 0.436 0.409 0.409 0.400 0.436 0.409 0.423 0.405 0.451 0.414 0.416 0.387 0.443 0.397 0.402 0.382 0.428 0.392 0.402 0.382 0.428 0.392 0.416 0.387 0.443 0.397 0.409 0.372 0.435 0.382 0.397 0.367 0.421 0.377 0.437 0.438 0.469 0.448 0.452 0.443 0.487 0.454 0.444 0.426 0.477 0.437 0.430 0.421 0.460 0.431 0.430 0.421 0.460 0.431 0.444 0.426 0.477 0.437 0.436 0.409 0.467 0.420 0.423 0.405 0.451 0.414 0.423 0.405 0.451 0.414 0.436 0.409 0.467 0.420 0.428 0.392 0.458 0.403 0.416 0.387 0.443 0.397 0.416 0.387 0.443 0.397 0.428 0.392 0.458 0.403 0.421 0.377 0.449 0.388 0.409 0.372 0.435 0.382 NM NN NO NP MM MN MO MP Note • Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of ± 0.01. LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (mcd) STANDARD MIN. MAX. U1 450 560 U2 560 715 V1 715 900 V2 900 1125 W1 1125 1400 Rev. 1.0, 21-Oct-13 Note • Luminous intensity is tested with an accuracy of ± 15 %. The above type Numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where color groups are measured and binned, single color groups will be shipped on any one reel. In order to ensure availability, single color groups will not be orderable. Document Number: 82565 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLHW4400-JKPL, VLHW4400-LKNL, VLHW4400-QPMM www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.2 25 20 Irel - Relative Intensity IF - Forward Current (mA) Warm White 1.0 15 10 5 0.8 0.6 0.4 0.2 0 400 450 500 550 600 650 700 750 800 0 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) λ - Wavelength (nm) Fig. 1 - Forward Current vs. Ambient Temperature 10° 20° 100 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 IF - Forward Current (mA) IV rel - Relative Luminous Intensity 0° Fig. 4 - Relative Intensity vs. Wavelength 10 80° 1 0.6 0.4 0.2 0 0.2 0.4 0.6 95 10042 0 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement IV rel - Relative Luminous Intensity 1.0 Irel - Relative Intensity 3 4 5 100 Cool White 0.8 0.6 0.4 0.2 450 500 550 600 650 λ - Wavelength (nm) Fig. 3 - Relative Intensity vs. Wavelength Rev. 1.0, 21-Oct-13 2 Fig. 5 - Forward Current vs. Forward Voltage 1.2 0 400 1 VF - Forward Voltage (V) 22170 700 10 1 0.1 1 10 100 IF - Forward Current (mA) Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 82565 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLHW4400-JKPL, VLHW4400-LKNL, VLHW4400-QPMM www.vishay.com Vishay Semiconductors 0.39 0.48 PL 0.37 OL OK ML 0.33 NK LL 0.31 KL MK LK 0.29 JL 0.25 0.27 19784_4 0.29 NM PM QM MN NN 0.42 PN QN MO NO 0.40 PO QO MP NP 0.38 PP QP KK JK 0.27 MM 0.44 NL y-Coordinates y-Coordinates 0.35 0.46 PK 0.36 0.31 0.33 0.35 0.34 0.38 0.37 x-Coordinates 0.40 0.42 0.44 0.46 0.48 0.50 x-Coordinates Fig. 7 - Coordinates of Colorgroups for Cool White Fig. 8 - Coordinates of Colorgroups for Warm White PACKAGE DIMENSIONS in millimeters Ø 3.18 24.13 min. 1.02 nom. 4.3 5.1 ± 0.4 Ø 2.93 technical drawings according to DIN specifications Not indicated tolerances ± 0.25 0.5 nom. C 1.27 nom. A 2.54 nom. Drawing-No.: 6.544-5403.01-4 Issue: 2; 18.06.10 21948 Rev. 1.0, 21-Oct-13 Document Number: 82565 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLHW4400-JKPL, VLHW4400-LKNL, VLHW4400-QPMM www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example only) A B C D E A) B) C) D) E) F) G) H) I) K) L) M) L I G F H M K 2D barcode Vishay part number Quantity PTC = selection code (binning) Code of manufacturing plant Batch = date code: year / week / plant code Region code SL = sales location Terminations finishing Lead (Pb)-free symbol Halogen-free symbol RoHS symbol Rev. 1.0, 21-Oct-13 Document Number: 82565 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000