Datasheet

MODULE
PSD signal processing circuit
C9068, C9069
Digital output for connection with PC
C9068 (for one-dimensional PSD) and C9069 (for pin-cushion type two-dimensional PSD) are DC signal processing circuits specifically
designed for position measurement using PSD. Digital output allows direct connection with a personal computer through a serial (RS-232C)
interface. C9068 and C9069 are capable of detecting accurate positions of a spot light regardless of light intensity.
A D/A conversion signal is also output for monitoring, and when a voltmeter is connected to this D/A conversion output, the output voltage value
directly represents position data. (Output voltage represents the distance from the center of PSD. 1 V=1 mm)
Features
Applications
l Digital output
l Serial (RS-232C) connection with PC
l D/A conversion signal output for monitoring
l Easy handling due to single +12 V supply operation
l No complicated adjustment required
l Displacement measurement using PSD
l Testing using PSD
l PSD performance evaluation
■ Absolute maximum ratings
Parameter
Supply voltage
Operating temperature *1
Storage temperature *1
*1: No condensation
Symbol
Vcc Max.
Topr
Tstg
Value
+18
0 to +40
-10 to +60
Unit
V
°C
°C
■ Electrical and optical characteristics (Ta=25 °C, Vcc=+12 V)
Parameter
Symbol
Min.
Typ.
Max.
Conversion impedance
Tz
1 × 105
Feedback capacitance
Cf
100
C9068
1 × 10-5
9 × 10-5
IIN
Input signal current *2
C9069
9 × 10-5
1 × 10-5
Signal conversion time *3
Tr
5
Digital output format
Conforms to RS-232C (position signal, light level monitor output) 12-bit
D/A conversion output amplitude
Vo
-10
+10
Supply voltage
Vcc
+9
+12
+18
Current consumption
Icc
200
*2: Photocurrent Isc (total input signals) from PSD mounted on the C9068 or C9069 circuit board.
*3: Output response time versus spot light position change.
Unit
V/A
pF
A
A
ms
V
V
mA
■ Combination with PSD
The following PSDs can be used by soldering the PSD leads to the through-hole terminals on the circuit board.
Note: PSDs sold separately.
Compatible PSD
PSD
signal processing circuit
Type
Type No.
C9068
One-dimensional PSD
S3931, S3932, S3270 *4
C9069
Pin-cushion type two-dimensional PSD S1880, S2044, S5990-01 *5, S5991-01 *5
*4: These PSDs cannot be directly mounted on the circuit board. Connect to the through-hole terminals at the edge of the circuit
board by external wiring.
*5: An attachment board should be used.
1
PSD signal processing circuit
C9068, C9069
■ Accessory sample software display example (C9069)
Position data is displayed in numerical values and graphs.
OS: Windows 7
C9069 Sample software
X-Y graph
S1880 (Active area 12 × 12mm)
Type No.
Zoom
In
Out
Start
Stop
Port No.
Operation mode
Continuous
Data record
n=
Tp
Incident light level
■ Dimensional outline (unit: mm)
(2 ×) 2.2
(2 ×) 7
75
4
67
PSD INSTALLATION
HEAD
15
THROUGH-HOLES FOR
EXTERNALLY CONNECTED PSD
1.6
(2 ×) 7
CENTER POSITION
OF PSD
AT INSERTED
FLAT CABLE
Hi
Ok
Lo
102
C906*
110
16
10 10
4
15
(4 ×) R4
(6)
(4 ×) 3.2
DC JACK
8 MAX.
15 MAX.
(22 MAX.)
■ Accessories
• Dedicated AC adapter
• Sample software (CD-ROM)
• Flat cable (48 cm) with connector for D/A conversion signal output
• Attachment board for S5990-01/S5991-01 (C9069 only)
Note: RS-232C cable (straight) not supplied.
2
D/A CONVERSION
OUTPUT CONNECTOR
FLAT CABLE CONNECTOR
(10-PIN, male)
DIGITAL OUTPUT CONNECTOR
D-sub CONNECTOR
(9-PIN, female)
KACCA0118EB
PSD signal processing circuit
C9068, C9069
Information described in this material is current as of July, 2014.
Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the
information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always
contact us for the delivery specification sheet to check the latest specifications.
Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or
a suffix "(Z)" which means developmental specifications.
The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that
one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product
use.
Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Thorshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866
Cat. No. KACC1082E07
Jul. 2014 DN