Model 5913 Insulation Piercing Maxigrabber® Test Clip Set Features Plunger style insulation piercing clip with insulated jaws Stainless steel tip pierces insulated wires for otherwise inaccessible test points Pierces insulated wire from 24 AWG to 16 AWG wire Sheathed 4mm receptacle accepts shrouded banana plugs and unshrouded banana plugs Recommended for use with Pomona 5907A, 5908A and 5909A test leads Ratings Operating Voltage: 1000 Vrms Max. Do not use on circuits where transient stresses can exceed the rated voltage. Current: 10 amps Temperature: -20°C to +55°C (-4°F to +131°F) Ordering Information Model 5913 (a set of 1 red and 1 black Maxigrabber® test clips.) USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2014 D1094586 Rev. 100 Page 1 of 1