Model 3561, 3563, 3565, 4691 Banana Jack to #12, 16, 20 & 22 Pin Features • • • Ideal test adapters for rapid testing of the hard-to-get to sockets of multi-socket connectors. Flexible tip allows testing of adjacent contacts. Full insulation protects against shorting or contact damage. Materials Insulation: Polyvinyl Chloride (PVC) Banana Jack Body (upper connector) Material: Brass. Finish: Bright Tin Plated Pin (lower connector) Material: Brass Finish: Gold Plated over Nickel Plating Ordering Information Model: 3561-*, 3563-*, 3565-*, 4691-* * = Color: -0 Black, -2 Red Ordering Example: 3561-2 (red adapter) Model Contact Size Type 4691 22 AWG .030” (.76mm) Pin 3561 20 AWG .040” (1.02mm) Pin 3563 16 AWG .063” (1.60mm) Pin Current 3 Amps 12 AWG .093” (2.36mm) 3565 Pin Voltage Rating: For CE Compliance and for personal safety, do not hold in hand when voltages exceed 33 Vrms/70 Vdc. Maximum voltage for hands free use: 2500 Vrms Max. Operating Temperature: +55ºC (+131ºF) Max. Test Kit 6481: contains 18 pieces, one red and one black adapter of each adapter: 3560, 3561, 3562, 3563, 3564, 3565, 4690, 4691 and one set of model 6358 test leads. For banana jack to test sockets, see models: 3560, 3562, 3564, 4690 USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2009 D1093953 Rev. 101 Page 1 of 2 Model 3561, 3563, 3565, 4691 Banana Jack to #12, 16, 20 & 22 Pin USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2009 D1093953 Rev. 101 Page 2 of 2