Demo Kit Manual DN[Document ID] AS1130 Standard Board AS1130-WL_DK_ST ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 1 Document Feedback AS1130 Standard Board Table of Contents 1 Introduction .......................................................................................................................... 3 1.1 Kit Content ........................................................................................................................... 3 2 Getting Started ..................................................................................................................... 4 3 Hardware Description........................................................................................................... 5 3.1 Demo Board Description ...................................................................................................... 5 3.2 Single Color LED Board Description .................................................................................... 7 3.3 RGB LED Board Description ................................................................................................ 8 3.4 USB Interface Board Description ......................................................................................... 9 4 Software Description .......................................................................................................... 10 4.1 Animation Tool ................................................................................................................... 11 4.2 Ticker Tool ......................................................................................................................... 17 4.3 Working with XML .............................................................................................................. 19 5 Board Schematics, Layout and BOM ................................................................................. 21 5.1 Schematics, Layout and BOM AS1130 Demo Board ........................................................ 21 5.2 Schematics and Layout AS1130 Single Color LED Board ................................................ 24 5.3 Schematics and Layout AS1130 RGB LED Board ............................................................ 26 5.4 Schematics and Layout AS1130 USB Interface Board...................................................... 28 6 Ordering & Contact Information ......................................................................................... 30 7 Copyrights & Disclaimer ..................................................................................................... 31 8 Revision Information .......................................................................................................... 32 ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 2 Document Feedback AS1130 Standard Board 1 Introduction This document describes the AS1130 Demo Kit. The AS1130 is a compact LED driver for 132 single LEDs. The AS1130 offers a 12x11 LED-Matrix with 1/12 cycle rate. The required lines to drive all 132 LEDs are reduced to 12 by using the crossplexing feature optimizing space on the PCB. The whole LED-Matrix can be analog dimmed from 0 to 30mA in 256 steps. The Demo Kit allows too supply all components by the PC USB Port. No external supply or battery is needed. Except the USB cable (included), no wiring is needed which allows a fast and comfortable evaluation of the AS1130. The graphical user interface (GUI) runs on PC running Windows 7 and allows the user to control the AS1130. 1.1 Kit Content The AS1130 Demo Kit includes all items listed in Figure 1: Kit Content. Figure 1: Kit Content 1 2 3 4 5 6 Label Item 1 AS1130 Demo Board 2 USB Cable 3 AS1130 USB Interface Board 4 Standard LED Board Snap on board 5 RGB LED Board Snap on board ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Comment Data & Supply Page 3 Document Feedback AS1130 Standard Board Label Item Comment 6 USB Data Stick Documents and Software 2 Getting Started Drive the AS1130 only with the recommended settings and values as described in the datasheet. Please check www.ams.com for the latest version. For a detailed description of the Kit please read sections 3-5 of this document. Connect the LED board to connector J3 and make sure Jumper J8 is placed on the AS1130 Demo Board. Connect USB Interface Board J2 to connector J1 of AS1130 Demo Board Start the GUI and connect the USB Interface Board to PC USB Port via mini USB cable (U6). Enable “Direct Drawing Mode” in the GUI and select LEDs to be enabled in the LED matrix the dot correction (DC current) for each channel. If there are questions do not hesitate to contact us. ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 4 Document Feedback AS1130 Standard Board 3 Hardware Description 3.1 Demo Board Description The AS1130 Demo Board can be powered from the AS1130 USB Interface board via J1 if J8 is placed or via an additional USB cable plugged in U2 or any other supply via J6 and J7 (J8 has to be removed if powered from U2 or J6/J7!). The AS1130 can be controlled with the USB Interface board or any other controller board via 10 pole connector which enables fast code debugging. It supports connection of various LED test boards via 20 pole connector. Figure 2: Demo Board Connectors A C B E D F G H Label Name Designator Description Info A LEDs J3 LED Connector Connect LED board to this connector. The kit comes with RGB and standard LED board. B IN J1 Line In Connector Can be connected to AS1130 USB Interface Board, general purpose controller board or OUT “D” of the previous AS1130 Demo Board. C VDD ext J8 Supply Voltage Jumper placed: Vdd from IN “B” Jumper released: Vdd from “E” of “F” ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 5 Document Feedback AS1130 Standard Board Label Name Designator Description Info D OUT J2 Line Out Connector Can be connected to IN “B” of next AS1130 Demo Board. E USB U2 USB Power Supply Connect Mini USB cable. This Connector is not used for data transfer. Release Jumper “C” if cable is connected. F VDD, GND VDD, GND Supply Voltage Supply Voltage Range: 2.7V to 5.5V. Make sure no USB cable is connected on “E” and release Jumper “C”. G ADDR J4, J5 Device Address Selection Address is set to 0110111 Address depends on R5 (default is 10kΩ - 0110110) GND: Address is set to 0110000 H RESET S1 Reset Button Push to reset the AS1130 Notes: • Use only the Connectors VDD and GND ”F” or USB Connector “E”. Never use both supply possibilities at the same time! • If the AS1130 Demo Board is connected to the USB Interface Board and jumper “C” is set, no extra Supply is needed. Figure 3: Demo Board Pinout ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 6 Document Feedback AS1130 Standard Board 3.2 Single Color LED Board Description The Single Color LED Board has mounted 132 white LEDs. It can be attached to the AS1130 Demo Board by the 20-pin connector. The attachable LED board enables easy testing of various LEDs with minimum effort and costs. Figure 4: Single Color LED Board A Label Name Designator Description Info A LEDs J3 LED Board Connector Connect to connector “A” of AS1130 Demo Board. ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 7 Document Feedback AS1130 Standard Board 3.3 RGB LED Board Description The RGB LED Board has mounted 42 6-pin RGB LEDs. It can be attached to the AS1130 Demo Board by the 20-pin connector. The attachable LED board enables easy testing of various LEDs with minimum effort and costs. Figure 5: RGB LED Board A Label Name Designator Description Info A LEDs J3 LED Board Connector Connect to connector “A” of AS1130 Demo Board. ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 8 Document Feedback AS1130 Standard Board 3.4 USB Interface Board Description The USB Interface Board allows control of the AS1130 with the delivered graphical user interface (GUI). It allows too supply the AS1130 Demo Board with the PC USB Port without need of an additional supply or battery. Except the USB cable no wiring is needed for a fast evaluation of the AS1130. Figure 6: USB Interface Board B C A D Label Name Designator Description Info A USB U6 Mini USB Interface Data interface and board supply B J1 ICP Interface For details see PIC24FJ64GB datasheet C J2 Line Out Connector Can be connected to AS1130 Demo Board S1 Reset Resets the AS1130 (if connected) D RESET ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 9 Document Feedback AS1130 Standard Board 4 Software Description Plug the device to your Computer and install it. Afterwards restart your computer to finish installation. Now you can start AS1130 Evaluation SW either from the desktop icon or from the start menu. If the device is connected correctly in the right bottom corner it says “USB AS1130” otherwise “USB Not connected” Figure 7: Startup Screen ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 10 Document Feedback AS1130 Standard Board 4.1 Animation Tool Figure 8: Playback Features A B Label Name Comment A On Chip Data is stored on the AS1130. You can modify both the Frame Delay and the Number of Loops. On Chip Playback means that if the storage of the device is big enough then the data is programmed on the device otherwise the data is streamed. If the box “Streaming Mode only” which is explained later in letter J is checked the data is anyway streamed to the device. B Preview (GUI only) With this option you can only have an output on the GUI. A time delay can be adjusted with the buttons up and down. Another feature is to stop Playback either on first or last Frame. ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 11 Document Feedback AS1130 Standard Board Figure 9: Frame Control Feature C Label Name Comment C Frame Control On Frame Control Mode you can navigate through your existing Frames. You can either skip with the arrow buttons to the left or to the right. Under the arrows to the right of Frame the number shows your current position and how many Frames you have. Insert Frame: inserts a new Frame after your current Frame position Delete Frame: deletes the selected Frame Delete all Frames: all Frames are deleted Download Frame: is for moving the code from the Computer to the chip on the board. The Box in the bottom has to be checked if you want to have the selected Frame to be set as PWM. If marked it defines just the PWM Setting – not what should be displayed! Also how many PWM’s exist is displayed next to count. ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 12 Document Feedback AS1130 Standard Board Figure 10: Ram Configuration Feature D Label Name Comment D RAM Configuration This Feature gives you information about how many PWM Sets or how many ONOFF-Frames or how many dot corr. OnOff-Frames are possible for OnChip playback. If number of Sets exceeds the maximum streaming mode will be activated. One Frame consists of 2 datasets, the On/Off dataset and the Blink & PWM dataset. Where more On/Off Frames can be linked to one PWM set. Depending on the used PWM sets more or less On/Off frames can be stored inside the AS1130 ( see figure 5). Each On/Off Frame needs to define the used Blink & PWM datasheet. Figure 11: Ram Configuration ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 13 Document Feedback AS1130 Standard Board Note: After a first write of data to the frames, the configuration is locked in the AS1130 config register and can be changed only after a reset of the device. A change of the RAM configuration requires to re-write the frame datasets! Figure 12: Paint Properties Feature E Label Name Comment E Paint Properties In this Tool you can vary the brightness of a single LED “Brightness” and of all LED’s ”Global Brightness”. Checking the box “Blink” enables blinking of the LED’s. In this case color can not be changed. Figure 13: Paint Properties RGB E1 Label Name Comment E1 Paint Properties RGB Clicking on the color opens a new window in which the wanted color can be chosen. Checking the box “Blink” enables blinking of the LED’ which can be set for each color individually. In this Tool the globale brightness of the LED’s can be adjusted. ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 14 Document Feedback AS1130 Standard Board Figure 14: Scroll Feature F Label Name Comment F Scroll To enable scroll function check box “On” then choose moving direction either to the left or to the right. Figure 15: Paint Control Feature G H I Label Name Comment G Paint Control Load Frames: select an existing file and it will be opened to be edited Save Frames: saves your data in a xml File Export Frames: saves your data in an .inc file Info: Exports your data as a c-include file H Source The option Source with its dropdown Menu is for selecting a Matrix Copy: Copies a Frame of a Matrix. Copy all: all Frames of selected Matrix are copied. I Destination Destination option with its dropdown Menu is for selecting Matrix Paste: the copied content to another Frame. Paste all: all Frames of copied Matrix are pasted. ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 15 Document Feedback AS1130 Standard Board Figure 16: Misc. Settings Feature K L M N Label Name Comment K Direct Drawing Mode The Direct Drawing Mode gives you the opportunity to see your changes you are currently doing on the Matrix directly on your device. L Sync Frequency In the dropdown Menu you can choose your favored synchronization frequency between your computer and your device. M Button Load LED Config: import an existing LED Config file to your Project. Init AS1130: the device will be initialized. Reset Button: resets your device. FW Version: information which Firmware is installed. N Use Dot Corr. ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Dot Corr. Box: separate modification of the dots. Page 16 Document Feedback AS1130 Standard Board 4.2 Ticker Tool This Tool is supposed to be used for 24x5 matrices. The Ram Configuration Feature and the Paint Properties Feature are the same as in the Animation Tool. The Paint Control Feature is pretty the same but in the Ticker Tool there are no Copy all and Paste all buttons available. The Misc. Settings Features in the Ticker Tool are mostly the same as they are in the Animation Tool except the Direct Drawing option. Figure 17: Playback Feature O Label Name Comment O Scroll Direction In comparison to the Playback Feature in the Animation Tool there is an additional Feature “Scroll direction” which has to be set otherwise “Stop Playback on” is disabled. ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 17 Document Feedback AS1130 Standard Board Figure 18: Ticker Frames Control Feature P Label Name Comment P Ticker Frames Control Ticker Frames Control Feature gives you information about your Status how many OnOff and PWM Frames exist and how many Frames you are allowed to have. Generate Frames: creates an entered number of Frames. Insert after: creates a new Frame at the end. Delete: a single Frame can be deleted PWM: the selected Frame from the dropdown Menu to the right of the PWM checkbox can be set as PWM or not. Delete all Frames: a button for deleting all Frames. ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 18 Document Feedback AS1130 Standard Board 4.3 Working with XML XML files can be edited with lots of tools. The hwPos can be taken form the Single LED 2x5 config. Example (description of the code added in blue): -<ledConfig> //opens ledConfig -<chip i2cAddress=”0x30”> //opens chip and sets address “0x30” // if you want to drive more displays you have to copy the whole example code and substitute instead of 0x30 the proper i2c Address of the other display -<matrix nrOfRows=”2” nrOfColumns=”5”> //enter the maximum number of rows and columns between “ ” </matrix> // close Matrix </chip> //close chip </ledConfig> //close ledConfig Label Name Comment A Row Enter the number of the row of the LED B Col Enter the number of the column of the LED C Enable Enable = 1 = LED ON , Disable = 0 = LED OFF D RGB Enable = 1, Disable = 0 E hwPos Position of the white LED (no RGB) F hwPosGreen Position of the green LED G hwPosRed Position of the red LED H hwPosBlue Position of the blue LED ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 RGB… RedGreenBlue Page 19 Document Feedback AS1130 Standard Board Figure 19: hwPos The AS1130 is configured to control on big LED matrix. Anode CS0 Cathode CS2 HwPos=20 ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 20 Document Feedback AS1130 Standard Board 5 5.1 Board Schematics, Layout and BOM Schematics, Layout and BOM AS1130 Demo Board The AS1130 Demo Board is a 4-layer FR4 board. The main component is the AS1130 with some passive components and connectors. Figure 20: AS1130 Demo Board Schematic 1 2 3 4 µC Board Interface GND 1 3 5 7 9 2 4 6 8 10 VDD_MCU IN 2 4 SCL 6 IRQ 8 10 GND A optional VDD supply GND Interface 7472137 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 CS1 CS3 CS5 CS7 CS9 CS11 2 4 6 8 10 12 14 16 18 20 U2 BUS_PWR DD+ BUS_GND RSTN C3 SYNC D4 IRQ D5 ADDR D1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 CS9 CS10 CS11 C1 C2 A4 A5 B4 B5 C4 C5 SCL 1 2 C2 10uF C3 100nF D1 3 4 GND GND CS9 CS8 CS7 CS6 CS5 AS1130 132-LED Cross Plexing Driver RSTN SYNC IRQ ADDR 5 C VDD LED Board GND D3 VDD Shield C SCL GND B SDA A3 1 3 5 7 9 11 13 15 17 19 D2 U1 AS1130 GND USB Power Supply J3 CS0 CS2 CS4 CS6 CS8 CS10 SDA VDD CS4 B3 C1 1uF LED Board Connector B2 VDD GND CS3 VDD VDD ext GND Interface 8560129 CS1 VDD_MCU J8 1 B1 J7 GND CS2 SDA SYNC RSTN CS0 1 VDD A2 2 4 6 8 10 CS1 GND B 2 4 6 8 10 CS0 SCL IRQ GND 1 3 5 7 9 J6 OUT VDD 1 3 5 7 9 A1 VDD J2 VDD CS11 A CS10 J1 VDD_MCU 1 3 SDA 5 SYNC 7 RSTN 9 GND GND ADDR Selection GND IF Pull UPs - NC with MCU board VDD RSTN VDD 3 2 1 J4 J5 1 2 ADDR 3 R1 10k R2 10k R4 10k S1 SDA R5 ADDR GND RSTN IRQ D RESET D GND GND Size Project Title A4 AS1130 Demo Board Date 30.6.2012 Originator mkc 1 2 3 Revision 1.2 Sheet 1 of 3 4 Figure 21: Top Layer and Silk Screen AS1112 Evaluation Board ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 21 Document Feedback AS1130 Standard Board Figure 22: Inner Layer1 AS1130 Demo Board Figure 23: Inner Layer2 AS1130 Demo Board Figure 24: Bottom Layer AS1130 Demo Board (bottom view) ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 22 Document Feedback AS1130 Standard Board Figure 25: Bill of Materials AS1130 Demo Board Bill of Materials AS1130 Demo Board Company: ams AG Originator: mkc PCB Name: AS1130 Demo Board PCB Version: 1.2 Report Date: 30.6.2012 # Designator Comment 1 C1 1uF 2 C2 10uF 3 C3 100nF 4 J1 Interface 5 J2 Interface 6 J3 LED Board 7 J4, J5, J8 [NoValue], ADDR, VDD ext Component_Description Quantity GRM219R71E105KA88D 1 GRM219R61A106ME44D 1 Capacitors MLCC - 10% CAP CER 0.1UF 50V X7R 0805 MOLEX - 877601016 - Murata Electronics North America MOLEX GRM21BR71H104KA01L 1 877601016 1 STIFTLEISTE, MILLIGRID MOLEX - 87264-1052 MOLEX BUCHSE,90°,M/NETZ,10KO MOLEX - 54722-0204 MOLEX RECEPTACLE, 0.5MM, FISCHER ELEKTRONIK FISCHER ELEKTRONIK 87264-1052 1 54722-0204 1 SL11 124 36G 3 VERO 20-313137 1 VERO 20-2137 1 MULTICOMP MC0.1W08051%10KFR 1 B3S-1000 1 AS1130-BWLT 1 8 J6 VDD 9 J7 GND 10 R5 11 S1 RESET LÖTSTÜTZPUNKT MULTICOMP MC0.1W08051%10KFR OMRON ELECTRONIC - 12 U1 AS1130 13 U2 VDD ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Manufacturer Part Number Murata Electronics North AmericaElectronics Murata SL11 36G VERO124 - 20-313137 LÖTSTÜTZPUNKT VERO - 20-2137 - ROT BIS Approved Manufacturer CAP CER 1UF 25V 10% X7R 0805 Ceramic Multilayer OMRON ELECTRONIC COMPONENTS - B3S-1000 COMPONENTS IC LED DVR DOT MATRIX - ams 20WLCSP MOLEX - 54819-0572 MOLEX BUCHSE,USB,MINI-B,SMT Notes 54819-0572 1 15 Page 23 Document Feedback AS1130 Standard Board 5.2 Schematics and Layout AS1130 Single Color LED Board The AS1130 Single Color LED Board is a 2-layer FR4 board. Color of mounted LEDs is white. Figure 26: AS1130 Single Color LED Board Schematic D00 D10 D20 D30 D40 D50 D60 D70 D80 D90 DA0 4 CS11 CS10 CS9 CS8 3 CS7 CS6 CS5 CS4 CS3 CS2 2 CS1 CS0 1 B0 A A D01 D11 D21 D31 D41 D51 D61 D71 D81 D91 DA1 DB1 D02 D12 D22 D32 D42 D52 D62 D72 D82 D92 DA2 DB2 D03 D13 D23 D33 D43 D53 D63 D73 D83 D93 DA3 DB3 D04 D14 D24 D34 D44 D54 D64 D74 D84 D94 DA4 DB4 D05 D15 D25 D35 D45 D55 D65 D75 D85 D95 DA5 DB5 D06 D16 D26 D36 D46 D56 D66 D76 D86 D96 DA6 DB6 D07 D17 D27 D37 D47 D57 D67 D77 D87 D97 DA7 DB7 D08 D18 D28 D38 D48 D58 D68 D78 D88 D98 DA8 DB8 D09 D19 D29 D39 D49 D59 D69 D79 D89 D99 DA9 DB9 D0A D1A D2A 3A 4A 5A 6A 7A 8A 9A AA DBA LED Board Connector CS0 CS2 CS4 CS6 CS8 CS10 B J3 1 3 5 7 9 11 13 15 17 19 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 2 4 6 8 10 12 14 16 18 20 CS1 CS3 CS5 CS7 CS9 CS11 B LED Board C D C D Size Project Title A4 Single Color LED Board Date 30.06.2012 Originator mkc 1 2 3 Revision 1.1 Sheet 3 of 3 4 Figure 27: Top Layer and Silk Screen AS1130 Single Color LED Board ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 24 Document Feedback AS1130 Standard Board Figure 28: Bottom Layer AS1130 Single Color LED Board (top through view) Figure 29: Bill of Materials AS1130 Single Color LED Board Bill of Materials Single Color LED Board Company: ams AG Originator: mkc PCB Name: Single Color LED Board PCB Version: 1.1 Report Date: 30.06.2012 # 1 2 Designator Comment 3A, 4A, 5A, 6A, 7A, 8A, 9A, AA, B0, D00, D0A, D01, D1A, D02, D2A, D03, D04, LED D05, D06, D07, D08, D09, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53, D54, D55, D56, D57, D58, D59, D60, D61, D62, D63, D64, D65, D66, D67, D68, D69, D70, D71, D72, D73, D74, D75, D76, D77, D78, D79, D80, D81, D82, D83, D84, D85, D86, D87, D88, D89, D90, D91, D92, D93, D94, D95, D96, D97, D98, D99, DA0, DA1, DA2, DA3, DA4, DA5, DA6, DA7, DA8, DA9, DB1, DB2, DB3, DB4, DB5, DB6, DB7, DB8, DB9, DBA J3 LED Board Component_Description Manufacturer Manufacturer Part Number Quantity LED w hite 0402 Citizen Electronics CL-287S-WQ-SD MOLEX - 55560-0207 - PLUG, 0.5MM, 1.5MM HEIGHT, 20WAY MOLEX 132 55560-0207 1 3 Approved ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Notes 133 Page 25 Document Feedback AS1130 Standard Board 5.3 Schematics and Layout AS1130 RGB LED Board The AS1130 RGB LED Board is a 2-layer FR4 board. Color of mounted LEDs is white. Figure 30: AS1130 RGB LED Board Schematic D1A D1B D1C D2A D2B D2C D3A D3B D3C D4A D4B 4 CS11 CS10 CS9 CS8 3 CS7 CS6 CS5 CS4 CS3 CS2 2 CS1 CS0 1 D4C A A D5A D5B D5C D6A D6B D6C D7A D7B D7C D8A D8B D8C D9A D9B D9C D10A D10B D10C D11A D11B D11C D12A D12B D12C D13A D13B D13C D14A D14B D14C D15A D15B D15C D16A D16B D16C B B D17A D17B D17C D18A D18B D18C D19A D19B D19C D20A D20B D20C D21A D21B D21C D22A D22B D22C D23A D23B D23C D24A D24B D24C D25A D25B D25C D26A D26B D26C D27A D27B D27C D28A D28B D28C LED Board Connector CS0 CS2 CS4 CS6 CS8 CS10 C D29A D29B D29C D30A D30B D30C D31A D31B D31C D32A D32B D32C D33A D33B D33C D34A D34B D34C D35A D35B D35C D36A D36B D36C J3 1 3 5 7 9 11 13 15 17 19 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 CS1 CS3 CS5 CS7 CS9 CS11 2 4 6 8 10 12 14 16 18 20 C LED Board D37A D37B D37C D38A D38B D38C D41A D41B D41C D42A D42B D42C D39A D39B D39C D40A D40B D40C D D Size Project Title A4 RGB LED Board Date 30.06.2012 Originator mkc 1 2 3 Revision 1.1 Sheet * of 3 4 Figure 31: Top Layer and Silk Screen AS1130 RGB LED Board ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 26 Document Feedback AS1130 Standard Board Figure 32: Bottom Layer AS1130 RGB LED Board (top through view) Figure 33: Bill of Materials AS1130 RGB LED Board Bill of Materials RGB LED Board Company: ams AG Originator: mkc PCB Name: RGB LED Board PCB Version: 1.1 Report Date: 30.06.2012 # 1 2 Designator D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38, D39, D40, D41, D42 J3 Comment Component_Description Manufacturer Manufacturer Part Number Quantity RGB LED LED RGB Citizen Electronics CL-340 LED Board MOLEX - 55560-0207 - PLUG, 0.5MM, 1.5MM HEIGHT, 20WAY MOLEX 42 55560-0207 1 3 Approved ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Notes 43 Page 27 Document Feedback AS1130 Standard Board 5.4 Schematics and Layout AS1130 USB Interface Board The AS1130 USB Interface Board is controlled by a PIC24FJ64GB002 microcontroller, so that you can connect the AS1130 Demo Board via the Interface Board an USB to your computer. Figure 34: AS1130 USB Interface Board Schematic 1 2 3 4 µC Board Interface J2 VDD_PIC C4 A SDA SYNC RSTN 100n GND GND VDD J1 C5 100nF GND RSTN R3 R6 R4 10k 10k 10k 26 1 1 S1 VDD 10k B 2 24 PIC27FJ64GB002 U4 VCAP PGED1 DISVREG 1 R10 4 8 0R RSTN 27 R11 0R 28 USB supply VDD D46 RP9 VDD_PIC D45 GND ESD RP8 2k5 GND B 11 9 7 6 23 22 RP13 21 15 R12 SYNC 0R GND ESD D44 5 RP13 18 4 C9 10u R1 100k D+ RP7 19 D+ 14 RP14 D+ Shield 3 D- RP6 D- BUS_GND D- RP15 C7 GND D- C D43 2 16 100n ESD C D+ D+ R7 RA2 RP5 5 D- 13 1 RA3 PIC24FJ64GB RP4 29 BUS_PWR RP3 D+ R9 IRQ 0R GND RA4 D- SCL GND RP2 EP 0R VSS 3 R8 VDD SDA RESET C6 10u 17 GND PGEC1 RB5 GND U6 MCLR 10 J7 R5 GND VSS VDD J3 VUSB R2 10k 12 VDD_PIC ICP VBUS optional VDD supply RP13 6 Interface 8560129 25 GND 2 4 6 8 10 20 GND 2 4 6 8 10 5 4 3 2 1 SCL IRQ 1 3 5 7 9 MCU OUT VDD 1 3 5 7 9 VDD VDD A GND GND VDD C2 1uF C3 10uF 1 VIN VOUT GND GND VDD_PIC U5 AS1360 AS1360 LDO 3 D GND 2 3.3V Vout C8 1uF Title GND Project Title Date 15.05.2014 Originator * 1 D AS1130 USB Interface Board 1V1 Size A4 2 3 Revision 1V1 Sheet 1 of 3 4 Figure 35: Top Layer and Silk Screen AS1130 USB Interface Board ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 28 Document Feedback AS1130 Standard Board Figure 36: Bottom Layer AS1130 USB Interface Board Figure 37: Bill of Materials AS1130 USB Interface Board ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 29 Document Feedback AS1130 Standard Board 6 Ordering & Contact Information Ordering Code Description AS1130-WL_DK_ST AS1130 Demo Kit Standard Board Buy our products or get free samples online at: www.ams.com/ICdirect Technical Support is available at: www.ams.com/Technical-Support Provide feedback about this document at: www.ams.com/Document-Feedback For further information and requests, e-mail us at: [email protected] For sales offices, distributors and representatives, please visit: www.ams.com/contact Headquarters ams AG Tobelbaderstrasse 30 8141 Unterpremstaetten Austria, Europe Tel: +43 (0) 3136 500 0 Website: www.ams.com ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 30 Document Feedback AS1130 Standard Board 7 Copyrights & Disclaimer Copyright ams AG, Tobelbader Strasse 30, 8141 Unterpremstaetten, Austria-Europe. Trademarks Registered. All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. Demo Kits, Evaluation Kits and Reference Designs are provided to recipient on an “as is” basis for demonstration and evaluation purposes only and are not considered to be finished end-products intended and fit for general consumer use, commercial applications and applications with special requirements such as but not limited to medical equipment or automotive applications. Demo Kits, Evaluation Kits and Reference Designs have not been tested for compliance with electromagnetic compatibility (EMC) standards and directives, unless otherwise specified. Demo Kits, Evaluation Kits and Reference Designs shall be used by qualified personnel only. ams AG reserves the right to change functionality and price of Demo Kits, Evaluation Kits and Reference Designs at any time and without notice. Any express or implied warranties, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose are disclaimed. Any claims and demands and any direct, indirect, incidental, special, exemplary or consequential damages arising from the inadequacy of the provided Demo Kits, Evaluation Kits and Reference Designs or incurred losses of any kind (e.g. loss of use, data or profits or business interruption however caused) as a consequence of their use are excluded. ams AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of ams AG rendering of technical or other services. ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 31 Document Feedback AS1130 Standard Board 8 Revision Information Changes from 1-00 (2011-Oct-11) to current revision 2-00 (2014-Nov-14) Complete redesign Page all Note: Page numbers for the previous version may differ from page numbers in the current revision. ams Demo Kit Manual, Confidential [v2-00] 2014-Nov-14 Page 32 Document Feedback