SQ7414AENW www.vishay.com Vishay Siliconix Automotive N-Channel 60 V (D-S) 175 °C MOSFET FEATURES PRODUCT SUMMARY VDS (V) • TrenchFET® power MOSFET 60 RDS(on) (Ω) at VGS = 10 V 0.023 RDS(on) (Ω) at VGS = 4.5 V 0.028 ID (A) • Low thermal resistance PowerPAK® 1212-8 package with 1.07 mm profile • PWM optimized 18 Configuration • 100 % Rg and UIS tested Single • AEC-Q101 qualified PowerPAK® 1212-8W Single D 5 D 6 D 7 • Wettable flank terminals D 8 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 D 3. 3 m m 1 3.3 mm Top View 4 G Bottom View 3 S 2 S 1 S G N-Channel MOSFET S Marking Code: Q020 ORDERING INFORMATION Package PowerPAK 1212-8W Lead (Pb)-free and Halogen-free SQ7414AENW-T1-GE3 ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-Source Voltage VDS 60 Gate-Source Voltage VGS ± 20 TC = 25 °C Continuous Drain Current a Continuous Source Current (Diode Conduction) TC = 125 °C a Pulsed Drain Current b Single Pulse Avalanche Current Single Pulse Avalanche Energy Maximum Power Dissipation b L = 0.1 mH TC = 25 °C TC = 125 °C Operating Junction and Storage Temperature Range V 18 ID 18 IS 18 IDM 72 IAS 20 EAS 16 62 PD TJ, Tstg UNIT 20 -55 to +175 Soldering Recommendations (Peak Temperature) d 260 A mJ W °C THERMAL RESISTANCE RATINGS PARAMETER Junction-to-Ambient Junction-to-Case (Drain) PCB Mount c SYMBOL LIMIT RthJA 81 RthJC 2.4 UNIT °C/W Notes a. Package limited. b. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %. c. When mounted on 1" square PCB (FR4 material). d. Rework conditions: manual soldering with a soldering iron is not recommended for leadless components. S15-0940-Rev. B, 04-May-15 Document Number: 62980 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ7414AENW www.vishay.com Vishay Siliconix SPECIFICATIONS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage Gate-Source Threshold Voltage Gate-Source Leakage 60 - - 1.5 2 2.5 VDS = 0 V, VGS = ± 20 V IDSS On-State Drain Current a ID(on) Drain-Source On-State Resistance Dynamic VGS = 0 V, ID = 250 μA VDS = VGS, ID = 250 μA IGSS Zero Gate Voltage Drain Current Forward Transconductance VDS VGS(th) b a RDS(on) gfs Input Capacitance Ciss Coss Reverse Transfer Capacitance Crss Total Gate Charge c Gate-Source Charge Gate-Drain Charge ± 100 - - 1 VGS = 0 V VDS = 60 V, TJ = 125 °C - - 50 VGS = 0 V VDS = 60 V, TJ = 175 °C - - 150 VGS = 10 V VDS ≥ 5 V 20 - - VGS = 10 V ID = 8.7 A - 0.016 0.023 VGS = 10 V ID = 8.7 A, TJ = 125 °C - - 0.039 VGS = 10 V ID = 8.7 A, TJ = 175 °C - - 0.050 VGS = 4.5 V ID = 8.7 A - 0.019 0.028 - 50 - VDS = 15 V, ID = 8.7 A c Turn-On Delay Time VDS = 30 V, f = 1 MHz Rg c c c td(off) Pulsed Current a ISM Forward Voltage VSD 1590 112 140 - 42 52 19 25 2.6 - - 3.6 - f = 1 MHz 0.6 1.12 1.6 - 8 10 VDD = 30 V, RL = 30 Ω ID ≅ 1 A, VGEN = 10 V, Rg = 1 Ω - 13 16 - 22 26 - 15 18 tf Source-Drain Diode Ratings and Characteristics 1275 VDS = 30 V, ID = 8.7 A td(on) tr - - VGS = 10 V Qgs Qgd c Turn-Off Delay Time VGS = 0 V Qg c Gate Resistance Fall Time - VDS = 60 V nA μA A Ω S b Output Capacitance Rise Time - VGS = 0 V V pF nC Ω ns b IF = 8.7 A, VGS = 0 V - - 72 A - 0.8 1.2 V Notes a. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %. b. Guaranteed by design, not subject to production testing. c. Independent of operating temperature. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S15-0940-Rev. B, 04-May-15 Document Number: 62980 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ7414AENW www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 30 30 VGS = 10 V thru 4 V 24 ID - Drain Current (A) ID - Drain Current (A) 24 18 VGS = 3 V 12 18 TC = 25 °C 12 6 6 0 0 0 2 4 6 8 VDS - Drain-to-Source Voltage (V) TC = 125 °C TC = -55 °C 0 10 1 2 3 4 VGS - Gate-to-Source Voltage (V) Transfer Characteristics 5 100 4 80 gfs - Transconductance (S) ID - Drain Current (A) Output Characteristics 3 2 TC = 25 °C 1 TC = 125 °C TC = -55 °C 1 2 3 4 VGS - Gate-to-Source Voltage (V) TC = -55 °C 60 TC = 25 °C 40 TC = 125 °C 20 0 0 0 5 0 5 3 6 9 ID - Drain Current (A) 12 15 Transconductance Transfer Characteristics 1800 0.05 1600 1400 C - Capacitance (pF) RDS(on) - On-Resistance (Ω) 0.04 0.03 VGS = 4.5 V 0.02 VGS = 10 V 0.01 Ciss 1200 1000 800 600 400 Crss 200 0.00 0 Coss 0 6 12 18 ID - Drain Current (A) 24 On-Resistance vs. Drain Current S15-0940-Rev. B, 04-May-15 30 0 15 30 45 VDS - Drain-to-Source Voltage (V) 60 Capacitance Document Number: 62980 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ7414AENW www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 2.5 RDS(on) - On Resistance (Normalized) VGS - Gate-to-Source Voltage (V) 10 8 ID = 8.7 A VDs = 30 V 6 4 2 5 10 15 1.7 VGS = 10 V 1.3 VGS = 4.5 V 0.9 0.5 -50 0 0 ID = 8.7 A 2.1 20 -25 0 25 50 75 100 125 TJ - Junction Temperature (°C) Qg - Total Gate Charge (nC) 175 On-Resistance vs. Junction Temperature Gate Charge 0.10 100 TJ = 150 °C 0.08 RDS(on) - On-Resistance (Ω) 10 IS - Source Current (A) 150 1 TJ = 25 °C 0.1 0.06 TJ = 150 °C 0.04 0.01 0.02 0.001 0.00 TJ = 25 °C 0.0 0.2 0.4 0.6 0.8 1.0 0 1.2 2 4 6 8 10 VGS - Gate-to-Source Voltage (V) VSD - Source-to-Drain Voltage (V) On-Resistance vs. Gate-to-Source Voltage Source Drain Diode Forward Voltage 0.5 80 0.2 76 VDS - Drain-to-Source Voltage (V) VGS(th) Variance (V) ID = 1 mA ID = 5 mA - 0.1 ID = 250 μA - 0.4 72 68 64 - 0.7 60 - 1.0 - 50 - 25 0 25 50 75 100 TJ - Temperature (°C) Threshold Voltage S15-0940-Rev. B, 04-May-15 125 150 175 - 50 - 25 0 25 50 75 100 125 150 175 TJ - Junction Temperature (°C) Drain Source Breakdown vs. Junction Temperature Document Number: 62980 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ7414AENW www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 °C, unless otherwise noted) 100 100 μs ID - Drain Current (A) 10 IDM Limited 1 ms ID Limited 10 ms 100 ms, 1 s, 10 s, DC 1 Limited by RDS(on)* 0.1 BVDSS Limited TC = 25 °C Single Pulse 0.01 0.01 0.1 1 10 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified 100 Safe Operating Area 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 Notes: 0.1 PDM 0.05 t1 t2 1. Duty Cycle, D = 0.02 t1 t2 2. Per Unit Base = RthJA = 81 °C/W 3. TJM - TA = PDMZthJA(t) 4. Surface Mounted Single Pulse 0.01 10 -4 10 -3 10 -2 10 -1 1 10 100 1000 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient S15-0940-Rev. B, 04-May-15 Document Number: 62980 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ7414AENW www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 °C, unless otherwise noted) 2 Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 0.1 0.1 Single Pulse 0.05 0.02 0.01 10-4 10-3 10-2 Square Wave Pulse Duration (s) 10-1 1 Normalized Thermal Transient Impedance, Junction-to-Case Note • The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction-to-Ambient (25 °C) - Normalized Transient Thermal Impedance Junction-to-Case (25 °C) are given for general guidelines only to enable the user to get a “ball park” indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities can widely vary depending on actual application parameters and operating conditions. Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?62980. S15-0940-Rev. B, 04-May-15 Document Number: 62980 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Ordering Information www.vishay.com Vishay Siliconix PowerPAK® 1212-8 and PowerPAK 1212-8W Ordering codes for the SQ rugged series power MOSFETs in the PowerPAK 1212-8 and PowerPAK 1212-8W packages: DATASHEET PART NUMBER OLD ORDERING CODE a NEW ORDERING CODE SQ7414AEN SQ7414AEN-T1-GE3 SQ7414AEN-T1_GE3 SQ7414AENW - SQ7414AENW-T1_GE3 SQ7415AEN SQ7415AEN-T1-GE3 SQ7415AEN-T1_GE3 SQ7415AENW - SQ7415AENW-T1_GE3 SQS401EN SQS401EN-T1-GE3 SQS401EN-T1_GE3 SQS401ENW - SQS401ENW-T1_GE3 SQS405EN SQS405EN-T1-GE3 SQS405EN-T1_GE3 SQS405ENW - SQS405ENW-T1_GE3 SQS420EN SQS420EN-T1-GE3 SQS420EN-T1_GE3 SQS423EN SQS423EN-T1-GE3 SQS423EN-T1_GE3 SQS460EN SQS460EN-T1-GE3 SQS460EN-T1_GE3 SQS462EN SQS462EN-T1-GE3 SQS462EN-T1_GE3 SQS482EN SQS482EN-T1-GE3 SQS482EN-T1_GE3 SQS484EN SQS484EN-T1-GE3 SQS484EN-T1_GE3 SQS490EN SQS490EN-T1-GE3 SQS490EN-T1_GE3 SQS840EN SQS840EN-T1-GE3 SQS840EN-T1_GE3 SQS850EN SQS850EN-T1-GE3 SQS850EN-T1_GE3 Note a. Old ordering code is obsolete and no longer valid for new orders Revision: 25-Aug-15 Document Number: 66697 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix PowerPAK® 1212-8W Case Outline E2 E4 H L K 1 Z 2 4 5 3 4 b 6 θ 3 D5 2 D2 2 7 D1 D 8 e 1 M θ D4 A2 W L1 θ E3 Backside view of single pad θ c A A1 2 E1 E DIM. Detail Z Notes 1 Inch will govern 2 Dimensions exclusive of mold gate burrs 3 Dimensions exclusive of mold flash and cutting burrs MILLIMETERS INCHES MIN. NOM. MAX. MIN. NOM. MAX. A 0.97 1.04 1.12 0.038 0.041 0.044 A1 0 - 0.05 0 - 0.002 A2 0 - 0.13 0 - 0.005 b 0.23 0.30 0.41 0.009 0.012 0.016 c 0.23 0.28 0.33 0.009 0.011 0.013 D 3.20 3.30 3.40 0.126 0.130 0.134 D1 2.95 3.05 3.15 0.116 0.120 0.124 D2 1.98 2.11 2.24 0.078 0.083 0.088 D4 0.47 typ. D5 2.3 typ. 0.0185 typ. 0.090 typ. E 3.20 3.30 3.40 0.126 0.130 0.134 E1 2.95 3.05 3.15 0.116 0.120 0.124 E2 1.47 1.60 1.73 0.058 0.063 0.068 E3 1.75 1.85 1.98 0.069 0.073 0.078 E4 0.34 typ. 0.013 typ. e 0.65 BSC. 0.026 BSC K 0.86 typ. 0.034 typ. H 0.30 0.41 0.51 0.012 0.016 0.020 L 0.30 0.43 0.56 0.012 0.017 0.022 L1 0.06 0.13 0.20 0.002 0.005 0.008 0° - 12° 0° - 12° W 0.15 0.25 0.36 0.006 0.010 0.014 M 0.125 typ. 0.005 typ. ECN: C15-1530-Rev. B, 16-Nov-15 DWG: 6032 Revision: 16-Nov-15 Document Number: 64614 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000