Datasheet

COMPATIBLE HIGH-SPEED GATED
WITH HIGH- IMAGE INTENSIFIER UNITS
SPEED CAMERA C10880-03C / C10880-03F
OVERVIEW
Image intensifiers (I.I.) are devices capable of intensifying an image at high gain and high-speed gating (electronic shutter operation).
The C10880-03 series is an image intensifier unit which is suitable
for high-speed camera application. It has a built-in pulse generator
to allow multi-exposure (burst) operation.
The multialkali photocathode on the other hand offers high sensitivity over a wider spectral response range from the UV through
near IR region so observations can be made at various wavelengths. A C-mount lens or Nikon F-mount lens can be attached.
By using a relay lens, the C10880-03 series can be easily connected to various high-speed cameras. The image intensifier gain, gate
width and delay time can be controlled and set from a PC through
the RS-232C interface. (The image intensifier gain can also be
controlled and set from the remote controller.)
FEATURES
●Maximum Repetition Frequency: 200 kHz
●Built-in Pulse Generator
●Multi-exposure
●High-speed Gating: 10 ns minimum
●High Performance Image Intensifier
Wide spectral response range from UV to near IR:
Multialkali photocathode type.
High linearity compatible with high frame rate:
Image booster included.
APPLICATIONS
●Analysis of High-speed Phenomenon
Engine combustion state
Plasma emission / Discharge / Flow / Spray and so on.
●Observation of fast moving object
Flow observation of small particles / Gases / Liquid.
SPECIFICATIONS
Parameter
Luminous Sensitivity (Typ.)
Photocathode
Radiant Sensitivity B (Typ.)
Sensitivity A
Quantum Efficiency B (Typ.)
Effective Diameter (Min.)
Window Material
Photocathode Photocathode Material
Spectral Response
Peak Wavelength
Input Mount
Stage of MCP (Front-stage I.I.)
Phosphor
Material (Front-stage I.I. / Image Booster)
Screen
Effective Diameter (Min.)
Luminous Gain
Equivalent Background Input (EBI)
Limiting Resolution (Typ.)
Image Magnification
Window Material
Relay Lens Adapter
Output
Relay Lens
Description / Value
230
53
15
24
Synthetic silica
Multialkali
185 to 900
430
C-mount (C10880-03C), F-mount (C10880-03F)
1
P46 / P46
16
1 × 105
2 × 10-9
38
0.67
Borosilicate glass
Special mount for connecting a relay lens
A11703 (1:2), A4539 (1:1),
A11669 (3:2), A2098 (2:1), A11716 (3:1)
100 to 240
15.6
RS-232C Interface / Remote Controller
0 to +40
-20 to +50
Below 70
C10880-03C: 1750
C10880-03F: 1830
Power Requirement
Power Consumption (Max.)
Control Method
Operating Ambient Temperature
Storage Temperature
Operating and Storage Humidity C
Weight
NOTE: ATypical value at front-stage I.I.
BAt wavelength of peak sensitivity
Unit
µA/lm
mA/W
%
mm
—
—
nm
nm
—
—
—
mm
(lm/m2)/lx
lm/cm2
Lp/mm
—
—
—
—
V
W
—
°C
%
g
CNo condensation
Gate Specifications
Parameter
Description / Value
Normal (continuous) mode / Single gate mode / Burst gate mode
TTL positive logic
1 kΩ
10 ns to 9.99 ms
10 ns to 9.99 ms
200 kHz (protection circuit incorporated)
2 ns (10 ns maximum when gate time is set to 10 µs or more)
10 kHz (protection circuit incorporated)
16
500 ns
Operation Mode
Gate Trigger Input
Single Gate Mode
Level
Input Impedance
Gate time
Delay Time
Repetition Frequency (Max.)
Timing Jitter (Max.)
Burst Gate Mode
Repetition Frequency (Max.)
Number of Exposures (Max.)
Pulse Interval (Min.)
CHARACTERISTICS
●Typical Spectral Response
●Typical Phosphor Screen Spectral Emission
TII B0114EA
100
●Typical Phosphor Screen Decay Characteristics
TII B0115EA
102
TII B0116EA
101
100
RELATIVE INTENSITY (%)
80
RELATIVE INTENSITY (%)
CATHODE RADIANT SENSITIVITY (mA/W)
QUANTUM EFFICIENCY (%)
102
60
40
101
P46
100
100 ns
1 ms
20
CATHODE RADIANT SENSITIVITY
QUANTUM EFFICIENCY
10-1
100 200 300 400 500 600 700 800 900 1000
WAVELENGTH (nm)
INPUT LIGHT
PULSE WIDTH
0
400
450
500
550
600
WAVELENGTH (nm)
650
700
10-1
10-8
10-7
10-6
DECAY TIME (s)
10-5
10-4
DIMENSIONAL OUTLINES (Unit: mm)
●C10880-03C
Head (C-mount Type)
IMAGE BOOSTER
80
RELAY LENS
ADAPTER
14
84.5
16
33.3
61
80
7.5
C-MOUNT
18
INPUT
WINDOW
25
80
40
1.8
41
OUTPUT
WINDOW
GATE TIME
MONITOR
OUTPUT
(BNC)
GATE TRIGGER
INPUT (BNC)
78
AC ADAPTER
CONNECTOR
REMOTE CONTROLLER
RS-232C INTERFACE
POWER SWITCH
REAR VIEW
POWER / PROTECTION
DISPLAY LED
90
SIDE VIEW
40
FRONT VIEW
40
30
50
1/4"-20UNC
30
4-M3 DEPTH 8
50
80
(Weight: Approx. 1750 g)
BOTTOM VIEW
TII A0071EA
●C10880-03F
Head (F-mount Type)
IMAGE BOOSTER
14
84.5
16
33.3
61
27
80
F-MOUNT
18
7.5
INPUT
WINDOW
25
80
40
80
RELAY LENS
ADAPTER
41
OUTPUT
WINDOW
GATE TIME
MONITOR
OUTPUT
(BNC)
GATE TRIGGER
INPUT (BNC)
78
AC ADAPTER
CONNECTOR
REMOTE CONTROLLER
RS-232C INTERFACE
POWER SWITCH
REAR VIEW
POWER / PROTECTION
DISPLAY LED
SIDE VIEW
40
90
FRONT VIEW
40
30
50
1/4"-20UNC
30
4-M3 DEPTH 8
50
80
BOTTOM VIEW
(Weight: Approx. 1830 g)
TII A0072EA
DIMENSIONAL OUTLINES (Unit: mm)
●Remote Controller
2000
48
CONNECTION CABLE
TO HEAD
REAR VIEW
GAIN
ADJUSTMENT KNOB
POWER/PROTECTION
DISPLAY LED
111
RESET SWITCH
OPERATION SWITCH
(ON / OFF)
REMOTE CONTROLLER
70
29
TOP VIEW
SIDE VIEW
(Weight: Approx. 300 g)
TAPPA0086EA
RELAY LENS (Unit: mm) (Sold separately)
A11703 (1:2)
A11669 (3:2)
37-43
72-80
A2098 (2:1)
102-108
A2095
(C-MOUNT ADAPTER)
32.6
A4539 (1:1)
A11716 (3:1)
75-82
120-127
TII A0070EB
Type No. (ratio)
Output Mount
Weight (g)
Type No. (ratio)
Output Mount
Weight (g)
A11703 (1:2)
F-mount
450
A11669 (3:2)
C-mount
200
A4539 (1:1)
F-mount
400
A2098 (2:1)
C-mount
460
A2095 (–)
C-mount
80
A11716 (3:1)
C-mount
540
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2011 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected]
TII 1055E02
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected]
JAN. 2011 IP