image intensifier unit (c9016 series)

IMAGE INTENSIFIER UNITS
C9016 SERIES
C9016 series
OVER VIEW
Connecting a C9016 series image intensifier unit to the
front of a CCD camera or CMOS camera makes it easy
to capture images of low-light-level phenomena occurring
at high speeds.
The image intensifier can operate from a remote controller or PC via the USB interface. The C9016 series includes an excessive light protection function so users do
not have to worry about damage from an increase in incident light level.
FEATURES
●High performance image intensifier
Quantum efficiency: 50 % Typ. at 530 nm
(GaAsP photocathode model: C9016-01, -02)
High resolution (C9016-01, -03, -05)
High gain (C9016-02, -04, -06)
●Easy handling
Fully controllable from a PC via the USB interface
Easy-to-use remote controller
●Gate operation: 10 µs to 100 ms
●Built-in protective circuit prevents damage
from excessive light
APPLICATIONS
●Biological observation under microscope
●Imaging of low-light-level emission and fluorescence
●Analysis of explosion and combustion
●Imaging of invisible light
SPECIFICATIONS
Parameter
C9016-01 C9016-02 C9016-03 C9016-04 C9016-05 C9016-06
Unit
280
700
Luminous sensitivity (Typ.)
170
1500
µA/lm
Photocathode
62
214
Radiant sensitivity A (Typ.)
60
170
mA/W
sensitivity
18
50
17
30
%
Quantum efficiency A (Typ.)
17
17
mm
Effective diameter B
17
Borosilicate glass
Borosilicate glass
—
Synthetic silica
Window material
GaAsP
GaAs
—
Multialkali
Photocathode Photocathode material
280 to 720
370 to 920
nm
185 to 900
Spectral response range
530
800
nm
430
Wavelength of peak sensitivity
—
FOP
Window material
Phosphor
—
P43
Phosphor material C
screen
—
See Figure 4
Decay time
1.2 × 104
(lm/m2)/lx
5.0 × 106
Luminous gain (Typ.)
2.2 × 104
5.0 × 106
4.0 × 104
9.6 × 106
Radiant emittance gain A (Typ.)
1.4 × 104
3.4 × 106
8.7 × 103
4.0 × 106
1.2 × 104
2.7 × 106 (W/m2)/(W/m2)
3 × 10-12
2 × 10-11
1 × 10-11
Equivalent back- Luminous (Typ.)
lm/cm2
-15
-14
-14
8 × 10
3 × 10
4 × 10
W/cm2
ground Input (EBI) Radiant (Typ.)
Limiting resolution (Typ.)
64
57
64
57
64
57
Lp/mm
1
Image magnification
—
1.4 × 10-3 6.3 × 10-6 2.6 × 10-3 6.3 × 10-6 7.9 × 10-4 3.3 × 10-6
lx
AD
Maximum input light level
3.4 × 10-10 1.4 × 10-12 5.4 × 10-10 1.2 × 10-12 3.9 × 10-10 1.7 × 10-12
W/cm2
Power requirement
AC 100 V to AC 240 V (when AC adapter is used) / Supplied from PC (when USB is used)
—
Power consumption (Max.)
W
3.5
Operating ambient temperature
°C
0 to +40
Storage temperature
°C
-20 to +50
Operating and storage humidity E
%
Below70
NOTE: AAt wavelength of peak sensitivity
BEffective output area is 12.8 mm × 9.6 mm. Take the effective area of the camera and reduction rate of the relay lens to be used into account.
CP-24 and P-46 phosphor screens are also available.
DDuring normal (continuous) mode at maximum gain
ENo condensation
Controllable functions
Parameter
Gain setting
Operation mode switching
Gate time fine setting
Excessive light protection reset
Excessive light protection display
Remote controller
Yes
Yes
No
Yes
Yes
USB
Yes
Yes
Yes
Yes
Yes
Operation mode
Normal mode
Gain mode
Trigger input level
Setting method
Gate time *
Delay time *
Jitter (Max.)
Continuous mode
C-MOS positive logic
Set from PC via USB interface
10 µs to 100 ms (3 µs steps)
10 µs to 100 ms (3 µs steps)
1.5 µs
NOTE: * When using the USB interface, the following conditions must be met.
D (ms) + W (ms) + 2 (ms) <
= T (ms)
where D is the delay time, W is the gate time and the T is the trigger input interval.
Protective functions
Excessive light protection
Shuts off operation during excessive light warning.
Red LED flashes
During excessive
light warning
Excessive light
(on rear of head and remote controller operation panel)
protection display* During shut off
Red LED is lit continuously
operation
(on rear of head and remote controller operation panel)
500 Hz: Red LED is lit during shut off operation.
Repetition rate (Max.)*
(200 Hz Max. during communication)
Reset switch on remote controller
Protection circuit reset
or command via USB interface
NOTE: * The LED on the rear side of the head can be turned on / off by control from a PC.
CHARACTERISTICS
Figure 1: Typical spectral response characteristics
103
TAPPB0079EC
107
C9016-03, -04
(MULTIALKALI
PHOTOCATHODE)
TAPPB0083ED
C9016-01, -02
(GaAsP
PHOTOCATHODE)
C9016-06
106
102
LUMINOUS GAIN (lm/m2)/lx
CATHODE RADIANT SENSITIVITY (mA/W)
QUANTUM EFFICIENCY (%)
Figure 2: Typical luminous gain
101
C9016-05, -06
(GaAs
PHOTOCATHODE)
100
C9016-02, -04
105
C9016-05
C9016-01
104
103
C9016-03
102
CATHODE RADIANT SENSITIVITY
QUANTUM EFFICIENCY
10-1
100 200 300 400 500 600 700 800 900 1000
101
Min.
Max.
WAVELENGTH (nm)
GAIN SETTING
Figure 3: Typical phosphor screen spectral emission
100
Figure 4: Typical phosphor screen decay characteristics
TAPPB0080EA
102
TAPPB0081EA
80
60
RELATIVE INTENSITY (%)
RELATIVE INTENSITY (%)
P-43
P-24
P-43
40
P-46
20
0
350
400
450
500
550
600
WAVELENGTH (nm)
650
700
P-24
101
P-46
100 ns
100
100 ns
100 ns
10 µs
1 ms
1 ms
INPUT LIGHT
PULSE WIDTH
10-1
10-8
10-7
10-6
1 ms
10-5
10-4
DECAY TIME (s)
10-3
10-2
DIMENSIONAL OUTLINES (Unit: mm)
Head
Remote Controller
34.3
0.5
OUTPUT
WINDOW
C-MOUNT
50
4 × M3
CONNECTION CABLE
TO HEAD
TRIGGER INPUT
OUTPUT
WINDOW
2000
48
116
32
CONNECTOR (AUX)
FOR REMOTE
CONTROLLER
POWER SWITCH
REAR VIEW
47
POWER/
PROTECTION
DISPLAY LED
GAIN
ADJUSTMENT KNOB
AC ADAPTER
CONNECTOR
POWER/PROTECTION
DISPLAY LED
SIDE VIEW
FRONT VIEW
90
30
RESET SWITCH
1
30
OPERATION MODE
SELECTOR SWITCH
NORMAL/GATE
111
REAR VIEW
66
4
USB CONNECTOR
4 × M3
REMOTE CONTROLLER
(Weight: Approx. 570 g)
1/4"-20UNC
45
70
29
TOP VIEW
SIDE VIEW
BOTTOM VIEW
(Weight: Approx. 300 g)
TAPPA0061ED
TAPPA0062ED
SETUP EXAMPLE WITH OPTICAL ACCESSORIES
CCD CAMERA WITH
FIBER OPTIC WINDOW
C12550 SERIES
PC
IMAGE ACQUISITION
SOFTWARE
USB CABLE
AC ADAPTER
AC100 V to 240 V
CCD CAMERA WITH
FIBER OPTIC WINDOW
C9018/-01/-04
CAMERA CABLE
A5963 SERIES
OBJECTIVE LENS
WITH C-MOUNT
AC ADAPTER
A10059-01/-02
VIDEO OUTPUT
(EIA, CCIR, Progressive scan)
AC100 V to 240 V
F-MOUNT–C-MOUNT
1: 1 RELAY LENS
CONVERTER
ORCA Flash4.0 V2
A4539
A2095
MICROSCOPE
3: 2 RELAY LENS
A11669
C9016 SERIES
HEAD
ATTACHMENT
FOR MICROSCOPE
RELAY LENS
ADAPTER
A9017
2: 1 RELAY LENS
A2098
DIGITAL CCD CAMERA
(2/3 INCHES)
CCD CAMERA
(1/2 INCH)
IMAGE INTENSIFIER UNIT
IMAGE INTENSIFIER UNIT (C9016 SERIES)
ACCESSORIES (SOLD SEPARATELY)
CD-ROM CONTROL
SOFTWARE
CD-ROM
USB CABLE 2 m4
Hipic (Version 9.3pf4 or later)
PC (USB)5
Connections
REMOTE CONTROLLER3
AC
TRIGGER
INPUT
REMOTE CONTROLLER
AC CABLE2
ADAPTER1
100 V to 240 V
The recommended connections differ depending
on the operation mode and gain control method
for the C9016 series.
Operation
Gain control
Connections
DC
Remote control
1 2 3
DC
PC
4 5*
Selectable by
Gate
1 2 3 4 5
control software
* Also connect 1 and 2 when using a notebook PC.
TAPPC0109EG
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2015 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected]
TII 1062E01
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: [email protected]
China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected]
SEPT. 2015 IP