PDF pb1002PFCDC Data Sheet

Northwest Power, Inc.
Data Sheet
Power Bank PB1002PFCDC
Power Supply
Dual Input: AC and DC
1 or 2 Outputs
Low-Profile 1.68"
All specifications are at nominal input, full load, 25°C, all models, unless otherwise noted.
DC Input
Nominal Input Voltage Options
Input Voltage Range
Output Power
24V
18-36V
28V
10-36V
Based on specific module used
48V
36-75V
AC Input
Input Voltage (nominal)
Input Voltage Range
Input Frequency
Inrush Current (cold start.)
Input Fuse (internal)
Power Factor (minimum)
Input Harmonics
Line dropout
Output Power
115/230Vac
90-264Vac
47-63 Hz
<20 A at 115Vac, <40A at 230Vac
20A
0.95
EN 61000-3-2 Compliant
SEMI F47 Compliant when operated at 180-264Vac
850W max – Outputs A and B combined. See derating curve.
Output *
Maximum Output Current (Connector Limit)
Output Voltage (Factory configurable)
Module Size Options (AC side)
Module Size Options (DC side)
Output Voltage Set point (50% load)
Load Regulation, No load to full load (max.)
Line Regulation, Low Line to High Line (max.)
Maximum Output Power
DC Input 48Vin; Output 12V
Remote Sense
Output Trim
Output Ripple and Noise
A
49A
1.8 to 52 V
Maxi or Mini
Maxi or Mini
±1.2%
±0.2%
±0.2%
B
49A
1.8 to 52 V
Mini
Maxi or Mini
±1.2%
±0.2%
±0.2%
500W
500W
Yes
±10%
Vicor module specification
Yes
±10%
Vicor module specification
(*) Outputs A and B can be connected in parallel (with current sharing) or in series.
Environmental
Operating Temperature Range
Storage Temperature Range
Relative Humidity
Mechanical
Dimensions
Cooling
Outline Drawing
Weight (Typical, depends on configuration)
Northwest Power, Inc.
(503)-652-6161
www.npi-inc.com
Document No. 7294 Rev C
Print Date: 2014-05-19
Page 1 of 3
-20°C to 70°C
-40°C to 70°C
5% -95% non-condensing
10.5" x 7" x 1.68"
Internal Fans
Available on www.npi-inc.com
6.6 lb. (3 kg)
PB1002PFCDC
AC Input Connector
Pin
Signal Description
L1
1
Chassis
2
L2/N
3
Molex Sabre 43160-3103
Details
AC Line Connection
Chassis Connection
AC Line or Neutral Connection
DC Input Connector
Pin
Signal Description
+IN
1
-IN
2
Outputs A and B
Pin
Signal Description
1
+
+
2
3
4
Molex MFS 42820-2212
Details
Positive Input Terminal
Negative Input Terminal
Molex MFS 42820-4212
Details
Output B Positive Terminal, 49A max
Output A Positive Terminal, 49A max
Output B Negative Terminal, 49A max
Output A Negative Terminal, 49A max
Trim/Remote Sense Connections for Channels A and B
Pin
Signal Description
1
+Sense A
2
Trim A
3
- Sense A
4
+Sense B
5
Trim B
6
- Sense B
(AMP 102617-1)
Details
Positive Sense Connection
(Internally connected to positive output through 50 Ω resistor fused by 0.17A Polyfuse)
Connect this pin with a resistor to Pin 1 for trim up, or to Pin 3 for trim down.
Negative Sense Connection
(Internally connected to negative output through 50 Ω resistor)
Positive Sense Connection
(Internally connected to positive output through 50 Ω resistor fused by 0.17A Polyfuse)
Connect this pin with a resistor to Pin 4 for trim up, or to Pin 6 for trim down.
Negative Sense Connection
(Internally connected to negative output through 50 Ω resistor)
I/O Connections
Molex 70555-0040
All control signals are isolated from AC and DC; Input - 3,000 Vrms; Output - 250 Vrms; Chassis - 250 Vrms
Pin
1
2
3
4
5
6
Signal Description
Inhibit DC-A
Inhibit DC-B
Inhibit AC-A
Inhibit AC-B
Control Return
Details
Apply 24V** to inhibit Output B running from DC input
Apply 24V** to inhibit Output A running from DC input
Apply 24V** to inhibit Output A running from AC input
Apply 24V** to inhibit Output B running from AC input
Not Connected
Reference for all signals on I/O connector.
(**) Contact factory for other control voltage options.
Safety
Agency Approvals
Safety Standard Compliance
Isolation, AC Primary-to-Secondary
Isolation, AC Primary-Earth
Isolation, Secondary-Earth
Northwest Power, Inc.
(503)-652-6161
www.npi-inc.com
Document No. 7294 Rev C
Print Date: 2014-05-19
Page 2 of 3
cTUVus, CE LVD
EN 60950
3000Vrms
1500Vrms
250Vrms
PB1002PFCDC
Output Power
Output Power Derating
Maximum Output Power
Operation from AC Input Source
1000
800
600
400
0
100
200
300
Input Voltage (AC)
Northwest Power, Inc.
Information furnished by NORTHWEST POWER is believed to be accurate and reliable. However, no responsibility is assumed by NORTHWEST
POWER or Vicor for its use. No license is granted by implication or otherwise under any patent or patent rights of NORTHWEST POWER or Vicor.
NORTHWEST POWER products are not designed to be used in applications, such as life support systems, wherein a failure or malfunction could result
in injury or death. All sales are subject to NORTHWEST POWER 's Terms and Conditions of Sale, which are available upon request.
Specifications are subject to change without notice.
Northwest Power, Inc. ♦ 4211 SE International Way, Suite F♦ Milwaukie, OR, USA
Tel: 503-652-6161 ♦ Fax: 503-652-6868 ♦ www.npi-inc.com
Northwest Power, Inc.
(503)-652-6161
www.npi-inc.com
Document No. 7294 Rev C
Print Date: 2014-05-19
Page 3 of 3
PB1002PFCDC