ELECTRICAL SOLUTIONS A. System Overview Tie Harness Mounts • Designed to be attached to the wire harness during assembly • Cable ties can be installed by hand or with Panduit automatic cable tie tools • Used with harness board standoff posts • Available with or without corrugated tubing location tab • Natural nylon material for indoor use • Heat stabilized nylon material (30) for high temperature applications – indoor use 1.54 (39.1) B1. Cable Ties B2. Cable Accessories .37 (9.4) B3. Stainless Steel Ties .160 (4.1) Maximum Panel Thickness In. mm Used with Cable Ties* Part Number C1. Wiring Duct Panel Hole Diameter In. mm Material Mounting Method Color Std. Pkg. Qty. Std. Ctn. Qty. FOR CORRUGATED TUBING – A location tab on the mount shelf aligns with the corrugated tubing grooves to ensure proper mount location during assembly THMSP20-C THMSP20-C30 M, I, S M, I, S .160 .160 4.1 4.1 .244 – .283 .244 – .283 6.2 – 7.2 6.2 – 7.2 Nylon 6.6 Heat Stabilized Nylon 6.6 Natural Black Push Barb Push Barb 100 100 1000 1000 THMSP25-C THMSP25-C30 M, I, S M, I, S .230 .230 5.8 5.8 .244 -.283 .244 -.283 6.2 - 7.2 6.2 - 7.2 Nylon 6.6 Heat Stabilized Nylon 6.6 Natural Black Push Barb Push Barb 100 100 1000 1000 Nylon 6.6 Heat Stabilized Nylon 6.6 Natural Black Push Barb Push Barb 100 100 1000 1000 C2. Surface Raceway C3. Abrasion Protection C4. Cable Management FOR DISCRETE WIRING – No location tab THMSP20F-C THMSP20F-C30 M, I, S M, I, S .160 .160 4.1 4.1 .244 -.283 .244 -.283 6.2 - 7.2 6.2 - 7.2 THMSP25F-C M, I, S .230 5.8 .244 -.283 6.2 - 7.2 Nylon 6.6 Natural Push Barb 100 1000 THMSP25F-C30 M, I, S .230 5.8 .244 -.283 6.2 - 7.2 Heat Stabilized Nylon 6.6 Black Push Barb 100 1000 *Cable tie cross section sizes: M = Miniature, I = Intermediate, S = Standard. Harness Board Standoff Posts and Adapter • Used to hold a push mount accessory or cable tie at a specific location on a harness board HB2SP Part Number E1. Labeling Systems .21 DIA (5.3) TYP. 2 PLACES A C Height A In. mm A D B (Dia) Hole Diameter B In. mm Length C In. mm Width D In. mm E2. Labels HBUA For Use With Material Mounting Method Std. Pkg. Qty. Std. Ctn. Qty. Posts HB2SP19-X 2.00 50.8 .20 5.2 — — 0.50 12.7 PLWP, PRWP, WS, VWS, HWS, TPM Aluminum Bolt – Included 10 100 HB2SP25-X 2.00 50.8 .30 7.5 — — 0.50 12.7 PLWP, PRWP, PLP, THMS, HCMP, PMCC Aluminum Bolt – Included 10 100 .31 7.9 .28 7.1 3.00 76.2 1.00 25.4 HB2SP19-X, HB2SP25-X Nylon 6.6 #10 (M5) Screw 10 100 Adapter HBUA-X D2. Power Connectors D3. Grounding Connectors .28 DIA (7.2) TYP. 3 PLACES .50 (12.7) D1. Terminals For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index