Soldering conditions for Resistors Lead free paste (Sn-3Ag-0.5Cu) version Resistors Datasheet Soldering conditions for Resistors Lead free paste (Sn-3Ag-0.5Cu) version CONTENTS Recommended conditions for reflow soldering 2/5 Recommended conditions for flow soldering 2/5 Recommended conditions for manual soldering 2/5 Recommended conditions for washing 3/5 Sample of land pattern 4/5 www.rohm.com c 2014 ROHM Co., Ltd. All rights reserved. ○ 1/5 2014.08 - Rev.H Datasheet Resistors − Soldering conditions Recommended reflow soldering conditions Corresponded products MCR series / MNR series / ESR series / KTR series / TRR series / LTR series / PMR series / PML series / UCR series / PSR series (°C) Peak temperature 250 150 to 180°C, 120s max. 220°C, 60s max. 260±5°C max. / 10s max. 200 temperature 150 100 50 Preliminary heating Soldering 0 Time 2times max. Recommended flow soldering conditions Peak temperature 265C , 10s max. Number of times one time Corresponded products MCR series (except for MCR004 series) / MNR series (except for MNR02 / 04 / 12 / 14 / 15 / 18 series) / ESR series / KTR series / LTR series / TRR series / PSR series Recommended hand soldering conditions Temperature 350C Time 3s Max. Times one time 20W Max. Watt Corresponded products MCR series (except for MCR004 / 006 series) / MNR series (except for MNR15 / 18 series) / ESR series / KTR series / TRR series / LTR series / PMR series / PML series / UCR series / PSR series www.rohm.com c 2014 ROHM Co., Ltd. All rights reserved. ○ 2/5 2014.08 - Rev.H Datasheet Resistors − Soldering conditions Recommended washing conditions Corresponded products MCR series / MNR series / ESR series / KTR series / TRR series / LTR series / PMR series / PML series / UCR series Please contact us about PSR series. 1. Washing liquid washing liquid manufacturers water − ethanol − methanol − pine alpha ST-100S ARAKAWA CHEMICAL clean through 750H KAO technocare FRW-1 TOSHIBA TECHNOCARE Alternative HCFC : The use of HCFC as AK225AES left to the discretion of customers. 2. Condition of washing washing bath time temperature first bath ultrasonic bath less than 2min less than 60°C second bath immersion bath less than 2min less than 40°C third bath immersion bath less than 2min room temperature remarks 25 to 28kHz, 15W / L 3. Condition of drying time temperature remarks Drying machine less than 5min less than 100°C www.rohm.com c 2014 ROHM Co., Ltd. All rights reserved. ○ 3/5 2014.08 - Rev.H Datasheet Resistors − Soldering conditions Sample of land pattern (Unit : mm) MCR / ESR / KTR / TRR B D C Land A MCR ESR KTR TRR MCR004 − − MCR006 − MCR01 ESR01 MCR03 MCR10 Dimensions A B C D − 0.2 0.4 0.16 0.1 − − 0.3 0.84 0.3 0.27 − TRR01 0.5 1.3 0.5 0.4 ESR03 KTR03 TRR03 1.0 2.0 0.8 0.5 ESR10 KTR10 TRR10 1.2 2.6 1.15 0.7 MCR18 ESR18 KTR18 TRR18 2.2 4.0 1.5 0.9 MCR25 ESR25 KTR25 − 2.2 4.0 2.3 0.9 MCR50 − − − 3.8 6.0 2.3 1.1 MCR100 − − − 5.1 8.1 3.0 1.5 LTR / LTR - Low ohmic - D A C Dimensions LTR -low ohmic- LTR A B C D LTR10 0.50 2.70 2.00 1.10 LTR18 0.60 2.90 3.20 1.15 0.75 3.35 5.00 1.30 0.83 3.69 6.4 1.43 B Land − LTR50 LTR100 UCR Dimensions A B C D UCR01 0.5 1.8 0.5 0.65 UCR03 0.5 2.5 0.9 1.0 UCR10 0.8 3.4 1.3 1.3 UCR18 1.4 4.0 1.8 1.3 Part No. B D Land C A PMR/PMR - Jumper type Dimensions A B C D PMR01 0.5 1.8 0.5 0.65 PMR03 0.5 2.5 0.9 1.0 PMR10 0.8 3.4 1.3 1.3 PMR18 1.0 4.0 1.8 1.5 Part No. B D Land C A PMR25 1.0 4.0 2.8 1.5 PMR50 1.8 6.0 2.8 2.1 PMR100 1.2 (1mΩ) 2.4 (2,3,4,6mΩ, Jumper) 3.0 (5,7,8,9,10mΩ) 6.8 (1mΩ) 7.6 (2 to 10mΩ, Jumper) 3.4 (1mΩ) 3.8 (2 to 10mΩ, Jumper) 2.8 (1mΩ) 2.6 (2,3,4,6mΩ, Jumper) 2.3 (5,7,8,9,10mΩ) www.rohm.com c 2014 ROHM Co., Ltd. All rights reserved. ○ 4/5 2014.08 - Rev.H Datasheet Resistors − Soldering conditions (Unit : mm) PML Dimensions B A B C D PML10 0.14 1.6 2.0 0.73 PML18 0.325 2.675 3.2 1.175 PML100 0.8 4.2 6.4 1.7 Part No. D A C Land MNR Land <MNR02 / 12 / 32> <MNR04 / 14 / 34> C C A D A D C C B B E P1 P2 P1 <MNR15 / 35> P2 <MNR18> E B C C A D A D C C B P2 P1 P1 P1 P2 B P1 Dimensions A B C D E P1 P2 MNR02 0.5 0.35 to 0.4 0.5 1.5 − 0.65 to 0.7 − MNR04 0.5 0.4 0.5 1.5 0.3 0.5 0.5 to 0.55 MNR12 1.0 0.4 to 0.6 0.7 to 0.8 2.4 to 2.6 − 0.8 to 1.0 − MNR14 1.0 0.4 to 0.6 0.7 to 0.8 2.4 to 2.6 0.4 0.8 0.8 to 0.9 MNR15 1.0 0.48 0.7 to 0.8 2.4 to 2.6 0.32 0.64 0.72 MNR18 1.0 0.3 0.7 to 0.8 2.4 to 2.6 − 0.5 − MNR32 2.1 0.8 to 1.0 0.8 to 1.0 3.7 to 4.1 − 1.27 to 1.6 − MNR34 2.1 0.8 to 1.0 0.8 to 1.0 3.7 to 4.1 0.7 to 0.8 1.27 to 1.35 1.27 to 1.45 MNR35 2.1 0.8 to 1.0 0.8 to 1.0 3.7 to 4.1 0.7 to 0.8 1.27 to 1.3 1.27 to 1.4 Part No. PSR B A D Land C Type A PSR500 B C D 16.00 8.75 5.20 11.00 6.20 2.70 5.60 PSR400 Sensing Line www.rohm.com c 2014 ROHM Co., Ltd. All rights reserved. ○ ∗This land pattern is only for standard pattern. This does not gurantee the characteristics of the parts 5/5 2014.08 - Rev.H Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2014 ROHM Co., Ltd. All rights reserved. R1102A