Innovations Embedded Board No:BM1P061FJEVK-001 Confidential c 2013 ROHM Co.,Ltd. All Rights Reserved Reference Board Specification Description Input Symbol Min Voltage Vin 90 Frequency fac 47 Typ 50/60 N Load No L d IInputt Power P Output Voltage Vout 22.8 Current Iout 2 Ripple Voltage Vripple Max Unit 264 Vac 63 Hz 100 mW W 25.2 V Vi AC100V/230V Vin：AC100V/230V A 100 80 Condition mV 20MHz Bandwidth % Output：24V 2A 599mm Efficiency 24 2 Board No:BM1P061FJEVK-001 110mm Confidential c 2013 ROHM Co.,Ltd. All Rights Reserved Confidential 3 5 OUT GND 4 6 VCC CS FB c 2013 ROHM Co.,Ltd. All Rights Reserved 3 NC 7 Board No:BM1P061FJEVK-001 2 1 ACMONI VH 8 Application Schematic Component List Item C1 C2 C3 C4 C6 C7 C8 C10 C11 C12 C20 C21 DA1 D1 D2 D3 D4 D5 D6 F1 IC1 LP01 Q1 R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 Spec 0.1uF/X2 0.1uF/X2 100uF/450V 2200pF/500V 10uF/50V 1000pF/16V 47pF/16V 0.1uF/25V Low-Z 470uF/35V Low-Z Low Z 470uF/35V 2200pF/Y1 2200pF/Y1 800V/10A 800V/0.1A 800V/0.1A FRD 800V 0.5A SBD/FRD 40V 1A 200V 0.5A FRD 300V 5A 800V 5A 10kΩ 10kΩ 3.9MΩ short 39kΩ 47kΩ/2W 10Ω 150Ω 100kΩ 0.15Ω/1W Confidential Parts name LE224 LE224 450V 100uF CK45-R3AD222KYNS 10uF 50V 1000pF/16V 1608 47pF/16V 1608 0.1uF/25V 1608 Low-Z 470uF/35V Low-Z Low Z 470uF/35V 2200pF/Y1 2200pF/Y1 D10XB80 1N4007 1N4007 FRD 800V 1A RB160VA-40TR RF05VA2STR RF2001T3D 3.15A/AC250V BM1P061FJ SS26V-100250 R8005ANX MCR18EZHJ103 MCR18EZHJ103 MCR18EZHJ395 4 Board No:BM1P061FJEVK-001 Maker Okaya Okaya TDK Shindengen Rohm Rohm Rohm Rohm NEC Tokin Rohm Rohm Rohm Rohm MCR10EZPJ393 47kΩ/2W MCR18EZPJ100 MCR10EZPJ151 MCR10EZPJ104 LTR100 0.15Ω c 2013 ROHM Co.,Ltd. All Rights Reserved Rohm Rohm Rohm Rohm Rohm Item R11 R12 R15 R16 R17 R18 R19 R20 T1 U2 PC1 Spec 1kΩ 10Ω 2kΩ 1kΩ 120kΩ Ω 9.1kΩ 15kΩ 12kΩ EER28 Parts name MCR10EZPJ102 MCR18EZHJ100 MCR10EZPJ202 MCR10EZPJ102 MCR10EZPJ124 MCR10EZPJ912 MCR10EZPJ153 MCR10EZPJ123 YPP1178 TL431 PC817 Maker Rohm Rohm Rohm Rohm Rohm Rohm Rohm Rohm Tomita Transformer:YPP1178 Transformer:YPP 1178 (EER28 28)) 1 12 Barrier tape NP1 11 2 2mm NP2 3 10 NP1 NS2 NS1 ND NS2 NＰ2 9 4 ND NS1 4mm 5 8 6 7 Insulation tape Insulation tape 3T Core： JFE MB3 EER-28.5A or compatible Bobbin： JFE BER28.5SP12 Vertical/Terminal Pins 6-6(12pins) or compatible AL-Value： 137.5 nH/N2 Inductance(1-3pin)： 0.220 ｍH±15% Coil Terminal Turns Wire Winding Method NP1 ‘1-2 20 2UEW 0.45 1 Layer FIT（密） NS1 ‘8-12 16 2UEW 0.5 1 Layer FIT（密） y SPACE（均等） ND ‘5-4 10 2UEW 0.45 1 Layer NS2 ‘9-11 16 2UEW 0.5 1 Layer FIT（密） NＰ2 ‘2-3 20 2UEW 0.45 1 Layer FIT（密） Winding beginning：Fix by barrier tape Winding end：Interpose the line drawn i a right in i ht angle l Winding direction：Unification Transformer Specification 5 Measurement Data Vin(V) 90 100 230 264 Confidential Pin(W) 0.054 0.434 13.70 27.69 42.11 56.92 0.055 0.433 13.52 27.51 41.70 56.22 0.081 0.457 13.61 26.94 40.45 54.10 0.094 0.469 13.48 26.80 40.31 53.96 6 Board No:BM1P061FJEVK-001 Vout(V) 23.88 23.88 23.87 23.86 23.86 23.86 23.88 23.88 23.89 23.86 23.86 23.86 23.88 23.88 23.86 23.85 23.84 23.84 23.88 23.88 23.86 23.84 23.84 23.83 c 2013 ROHM Co.,Ltd. All Rights Reserved Iout(A) 0 0.01 0.5 1 1.5 2 0 0.01 0.5 1 1.5 2 0 0.01 0.5 1 1.5 2 0 0.01 0.5 1 1.5 2 Pout(W) 0 0.239 11.93 23.86 35.79 47.72 0 0.239 11.94 23.86 35.79 47.72 0 0.239 11.93 23.85 35.76 47.68 0 0.239 11.93 23.84 35.76 47.67 η(%) 55.0 87.1 86.2 85.0 83.8 55.1 88.4 86.7 85.8 84.9 52.3 87.7 88.5 88.4 88.1 50.9 88.5 89.0 88.7 88.3 Conduction EMI Vin：AC100V/50Hz Vout：24V 2A Vin：AC230V/50Hz Vout：24V 2A Confidential c 2013 ROHM Co.,Ltd. All Rights Reserved 7 Board No:BM1P061FJEVK-001 Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. R1102A