Cypress Roadmap: Automotive Products Q2 2016 001-90263 Rev *J Owner: THOR BUM: JHMU Automotive Products Roadmap Table of Contents Page 001-90263 Rev *J Topic 4 Automotive TrueTouch® Roadmap 10 Automotive CapSense® Roadmap 17 Automotive PSoC® Roadmap 25 Automotive Asynchronous SRAM 30 Automotive Synchronous RAM 33 Automotive Nonvolatile RAM 38 Automotive USB 43 Automotive Timing Solutions 47 Automotive Power Management IC 52 Automotive LED Driver Owner: THOR BUM: JHMU Automotive Products Roadmap 2 Automotive TrueTouch® Roadmap 001-90263 Rev *J Owner: THOR BUM: JHMU Automotive Products Roadmap 3 Automotive Portfolio: TrueTouch® Gen1 Gen3 Gen4 Gen5 Gen6 CYAT8168X-88/-77 88/77 I/O10, 10 F1, AA6 Gestures, DualSense7, In-Cell11 AMS12, Glove Touch, H2O8 Grades: A4 and S9 NEW CYAT8168X-71 71 I/O, 10 F1, AA6 Gestures, DualSense7, In-Cell11 AMS12, Glove Touch, H2O8 Grades: A4 and S9 > 9″ Screens CY8CTMA1036 65 I/O, 10 F1, 80-Hz RR2, AA6 Gestures, DualSense™7 Glove Touch, H2O8 Grades: A4 and S9 CY8CTMA616 50 I/O, 10 F1, 65-Hz RR2 Gestures, Mutual-Capacitance3 Grades: A4 and E5 CY8CTMA768 56 I/O, 10 F1, 80-Hz RR2, AA6 Gestures, DualSense7 Glove Touch, H2O8 Grades: A4 and S9 3″-8″ Screens CY8CTMA884 60 I/O, 10 F1, 65-Hz RR2 Gestures, Mutual-Capacitance3 Grades: A4 and E5 6″-9″ Screens NEW CY8CTMG120 43 I/O, 1 or 2 F1, 50-Hz RR2 Gestures, Self-Capacitance13 Grade: A4 CY8CTMA461 48/43 I/O14, 10 F1, AA6, DualSense7, Thick Overlay AMS12, Glove Touch, H2O8 Grades: A4 and S9 CY8CTMA120 32 I/O, 10 F1, 50-Hz RR2 Mutual-Capacitance5 Grade: A4 CY8CTMA460 48/43 I/O14, 10 F1, 100-Hz RR2, AA9, Gestures, DualSense7 Glove Touch, H2O8 Grades: A4 and S10 1 Number of finger locations reported rate 3 The capacitance between a row and a column in a Touchscreen Sensor 4 AEC-Q100: -40ºC to +85ºC 5 AEC-Q100: -40ºC to +125ºC 6 AutoArmor™: Enables compliance with chip-level emissions, immunity and system-level specifications 2 Refresh 001-90263 Rev *J Owner: THOR BUM: JHMU 7 Q316 CY8CTMA568 54 I/O, 10 F1, AA6 Gestures, DualSense7, In-Cell11 AMS12, Glove Touch, H2O8 NDA Contact Sales Self-Capacitance + Mutual-Capacitance Waterproofing and wet-finger tracking 9 AEC-Q100: -40ºC to +105ºC 10 Number of available I/Os depends on package selection 11 A type of sensor stack-up in which the touch sensor is inside the LCD module under the color-filter glass 12 Automatic Mode Switching 13 The capacitance of a row or column in a Touchscreen Sensor 14 CYAT8168X-61 61 I/O, 10 F1, AA6 Gestures, DualSense7, In-Cell11 AMS12, Glove Touch, H2O8 Grades: A4 and S9 NEW 43 I/Os: 56-QFN Development, 48 I/Os: 100-TQFP Production 8 Automotive Products Roadmap Production Sampling Development Concept Industrial Automotive Availability QQYY QQYY 4 Automotive Portfolio: TrueTouch® Software1 PSoC Designer™ TrueTouch® Host Emulator2 TrueTouch Driver for Android3 Manufacturing Test Kit4 5.4 SP1 3.3.10 3.5 1.8.2 CY8CTMA616 Production Production CY8CTMA884 Production TTDA 2.5.1 Production CY8CTMA460 Production CY8CTMA768 Production CY8CTMA1036 Production CY8CTMA461 Production Gen 5 CY8CTMA568 Production Gen 6 CYAT8168X-61 Production CYAT8168X-71 Production Software MPN Current Version Gen 1 Gen 3 Gen 4 ® CY8CTMA120 Production CY8CTMG120 Production Production Production TTDA 2.5 Production Production Production Production TTDA 3.5 Production Production Production Production Q4 2016 CYAT8168X-77 Production Production CYAT8168X-88 Production Production Contact sales for the latest TrueTouch software, drivers and tools 1 PSoC Designer, TTHE and MTK releases are backward compatible. The latest version is recommended for new designs. Host Emulator (TTHE) is a front-end tool used to configure, tune, debug and demonstrate TrueTouch devices 3 TrueTouch Driver for Android (TTDA) is the driver for Android that translates touch information into Linux/Android events 4 TrueTouch Manufacturing Test Kit (MTK) enables customers and ITO partners to test touch panels that use Cypress TrueTouch controllers through the manufacturing flow 2 TrueTouch 001-90263 Rev *J Owner: THOR BUM: JHMU Automotive Products Roadmap 5 CY8CTMA460/768/1036 Automotive TrueTouch® Gen4 Family Applications Block Diagram Host Processor Touchscreens Trackpads Features Advanced User Interface Waterproofing1: Works with water droplets, condensation, sweat and wet-finger tracking Tracking with up to 1-mm-thick gloves Proprietary Analog Front End2 with AutoArmorTM 3 True 10-V TX-Boost™ with multiphase TX4 DualSense™: Self5- and mutual6-capacitance analog front end (U.S. patents 8,358,142; 8,319,505; and 8,067,948) System Solutions Supports thin ITO7 stackups and metal mesh sensors AutoArmor™ enables compliance with chip-level emission (IEC 61967), immunity (IEC 62132) and system-level (CISPR 25) specifications Android driver support Manufacturing test kits for production testing Packages 100-pin TQFP, 56-pin QFN (TMA460 only) CY8CTMA 460/768/1036 32 Flash ARM® Cortex™ CPU 32 SRAM 32 10-V TX Pump Touch Sequencer RX Channels Programmable Analog Multiplexer 65 Touchscreen Sensor I/O: XY00-XY64 Touchscreen Sensor Availability Datasheets, Design Guides and Evaluation Kit: www.cypress.com/automotivetouch/CY3290-TMA1036A Sampling: Production: 56-pin QFN: Q2 2016 100-pin TQFP: Now; 56-pin QFN: Q2 2016 1 The 5 The 2 Analog 6 The ability of a Touchscreen Sensor to work properly in the presence of water droplets, condensation or sweat circuit in the touchscreen controller used to measure Self- and Mutual-Capacitance 3 Cypress proprietary technology used to reduce emissions and improve EMI immunity to meet automotive EMC requirements 4 A scanning method used to drive multiple TX lines simultaneously Owner: THOR BUM: JHMU I2C/SPI 32 Collateral 001-90263 Rev *J 1 - I2 C 2 - Serial Peripheral Interface (SPI) INT8 Automotive Products Roadmap capacitance of a row or column line in a Touchscreen Sensor capacitance between a row and a column in a Touchscreen Sensor 7 Indium tin oxide 8 Interrupt 6 CY8CTMA461 Automotive TrueTouch® Gen4 Family Applications Block Diagram Host Processor Touchscreens Trackpads Features CY8CTMA461 I2C/SPI Advanced User Interface Waterproofing1: Works with water droplets, condensation, sweat and wet-finger tracking Tracking with up to 5-mm-thick gloves or thick overlay Proprietary Analog Front End2 with AutoArmorTM 3 True 10-V TX-Boost™ with multiphase TX4 DualSense™: Self5- and mutual6-capacitance analog front end (U.S. patents 8,358,142; 8,319,505; and 8,067,948) System Solutions Supports thin ITO7 stackups and metal mesh sensors AutoArmor™ enables compliance with chip-level emission (IEC 61967), immunity (IEC 62132) and system-level (CISPR 25) specifications Android driver support Manufacturing test kits for production testing Packages 100-pin TQFP, 56-pin QFN 32 32 Flash 10-V Tx Pump 32 SRAM Touch Sequencer Rx Channels Programmable Analog Multiplexer 48 Touchscreen Sensor I/O: XY00-XY47 Touchscreen Sensor Availability Datasheets and Design Guides: Contact Sales or [email protected] Sampling: Production: 56-pin QFN: Q2 2016 100-pin TQFP: Now; 56-pin QFN: Q2 2016 1 The 5 The 2 Analog 6 The ability of a Touchscreen Sensor to work properly in the presence of water droplets, condensation or sweat circuit in the touchscreen controller used to measure Self- and Mutual-Capacitance 3 Cypress proprietary technology used to reduce emissions and improve EMI immunity to meet automotive EMC requirements 4 A scanning method used to drive multiple TX lines simultaneously Owner: THOR BUM: JHMU ARM® Cortex™ CPU 32 Collateral 001-90263 Rev *J 1 - I2 C 2 - Serial Peripheral Interface (SPI) INT8 Automotive Products Roadmap capacitance of a row or column line in a Touchscreen Sensor capacitance between a row and a column in a Touchscreen Sensor 7 Indium tin oxide 8 Interrupt 7 CYAT8168X Automotive TrueTouch® Gen6 Family Applications Block Diagram Host Processor Large touchscreen human machine interface (HMI) systems 1 - I2C 2 - Serial Peripheral Interface (SPI) INT7 CYAT8168X Features Advanced User Interface Waterproofing1: Works with water droplets, condensation, sweat and wet-finger tracking Tracking with up to 5-mm thick gloves or thick overlay Proprietary Analog Front End2 with AutoArmor™3 True 5-V TX-Boost™ with Multi-Phase TX4 54 Receive Channels to support ≥100 Hz refresh rates DualSense™: Self5- and Mutual6-Capacitance analog front end (U.S. Patents 8,773,146; 8,358,142; 8,319,505; and 8,067,948) AutoArmor™ enables compliance with chip-level emissions (IEC 61967), immunity (IEC 62132) and system-level (CISPR 25) specifications System Solutions Manufacturing test kits for production testing Package 128-pin TQFP, 100-pin TQFP I2C/SPI 32 32 Flash ARM® Cortex® CPU 32 SRAM 32 Channel Engine Touch Sequencer 5-V TX Pump RX Channels Programmable Analog Multiplexer 88 Touchscreen Sensor I/O: XY00-XY87 Touchscreen Sensor Collateral Availability Datasheets and Design Guides: Contact Sales or [email protected] Production: Now 1 The 5 The 2 Analog 6 The ability of a Touchscreen Sensor to work properly in the presence of water droplets, condensation or sweat circuit in the touchscreen controller used to measure Self- and Mutual-Capacitance 3 Cypress proprietary technology used to reduce emissions and improve EMI immunity to meet automotive EMC requirements 4 A scanning method used to drive multiple TX lines simultaneously 001-90263 Owner: THOR Automotive Products Roadmap Rev *J BUM: JHMU capacitance of a row or column line in a Touchscreen Sensor capacitance between a row and a column in a Touchscreen Sensor 7 Interrupt 8 Automotive TrueTouch Packages Package QFN Pins Body Size 56 100 128 8 x 8 mm 14 x 14 mm 14 x 20 mm 0.5 mm 0.5 mm 0.5 mm Family Pitch Gen 1 CY8CTMA120 , 1 CY8CTMG120 Gen 3 Gen 4 TQFP CY8CTMA616 CY8CTMA884 CY8CTMA460 1 CY8CTMA768 CY8CTMA1036 CY8CTMA461 1 Gen 5 CY8CTMA568 Gen 6 CYAT8168X-61 CYAT8168X-71 CYAT8168X-77 CYAT8168X-88 1 Wettable flanks package to allow automated optical inspection (AOI) 001-90263 Owner: THOR Rev *J BUM: JHMU Automotive Products Roadmap 9 Automotive CapSense® Roadmap 001-90263 Rev *J Owner: THOR BUM: JHMU Automotive Products Roadmap 10 Entry Value Performance Automotive Portfolio: CapSense® CapSense Express™ CapSense Plus™ PSoC® Configurable1 Programmable2 Programmable System-on-Chip CY8CMBR3106S 11 Buttons, 2 Sliders SmartSense_EMCplus™3 Proximity Grades: A4 and S5 CY8CMBR3116 16 Buttons, 8 LEDs SmartSense_EMCplus3 Proximity, Water Tolerance Grades: A4 and S5 CY8C20xx7/S 31 Buttons, 6 Sliders 16, 32KB Flash; 2KB SRAM Proximity, Water Tolerance Glove, Stylus Support CY8CMBR3108 8 Buttons, 4 LEDs Proximity, Water Tolerance SmartSense_EMCplus3 CY8CMBR3110 Q416 10 Buttons, 5 LEDs SmartSense_EMCplus3 Proximity, Water Tolerance Grades: A4 and S5 CY8CMBR3102 2 Buttons, Proximity SmartSense_EMCplus3 CY8CMBR2110 10 Buttons, 10 LEDs SmartSense Auto-tuning CY8CMBR310XLP 1-4 Buttons, Low Power Contact Sales CY8CMBR2016 16 Buttons SmartSense Auto-tuning CY8CMBR2044 4 Buttons, 4 LEDs SmartSense Auto-tuning CY8CMBR2010 10 Buttons, 10 LEDs SmartSense Auto-tuning CY8C24x94 43 Buttons, 8 Sliders 16KB Flash, 1KB SRAM Grade: A4 CY8CMBR3002 2 Buttons, 2 LEDs SmartSense_EMCplus3 CY8C201xx 10 Buttons, 5 LEDs 2 Sliders CY8C20234 10 Buttons, 2 Sliders 8KB Flash, 512Byte SRAM Grade: A4 CY8C20236A 10 Buttons, 2 Sliders 8KB Flash, 1KB SRAM SmartSense Auto-tuning Grade: A4 CY8C21x34 20 Buttons, 4 Sliders 8KB Flash, 512Byte SRAM Proximity, Water Tolerance Grades: A4 and E6 CY8C20xx6H 25 Buttons, 5 Sliders 8,16KB Flash; 1,2KB SRAM SmartSense Auto-tuning Haptics NEW CY8C4246/7-M Q316 51 Buttons, 10 Sliders 64, 128KB Flash Proximity, Water Tolerance Grades: A4 and S5 CY8C4246/7-L 96 Buttons, 19 Sliders 128, 256KB Flash Proximity, Water Tolerance Contact Sales NEW CY8C40xx/41xx-S 36 Buttons, 7 Sliders 32, 64KB Flash Proximity, Water Tolerance Grades: A4 and S5 CY8C36xx/38xx 62 Buttons, 12 Sliders 32, 64KB Flash Proximity, Water Tolerance Grades: A4 and E6 CY8C41xx/42xx 24 Buttons, 4 Sliders 16, 32KB Flash Proximity, Water Tolerance Grades: A4 and S5 CY8C32xx/34xx 62 Buttons, 12 Sliders 16-64KB Flash Proximity, Water Tolerance Grades: A4 and E6 CY8C21x12 20 Buttons, 4 Sliders 8KB Flash, 512Byte SRAM Proximity, Water Tolerance Grades: A4 and E6 CY8C2xx45 36 Buttons, 7 Sliders 16KB Flash, 1KB SRAM Grades: A4 and E6 CY8C40xx 16 Buttons, 3 Sliders 16KB Flash, 2KB SRAM Proximity, Water Tolerance Grades: A4 and S5 Integration 1 Standard products are configured for target applications with a graphical user interface 2 Microcontroller-based products can be freely programmed to implement additional functions 3 SmartSense Electromagnetic Compatible = SmartSense Auto-tuning + high noise immunity 001-90263 Rev *J Owner: THOR BUM: JHMU 4 AEC-Q100: -40ºC to +85ºC 5 AEC-Q100: -40ºC to +105ºC 6 AEC-Q100: -40ºC to +125ºC Automotive Products Roadmap Production Sampling Development Concept Industrial Automotive Availability QQYY QQYY 11 Automotive Portfolio: CapSense® Software1 Software Current Version PSoC® Creator™2 PSoC Designer™ 3.3 CP2 PSoC 1 3 PSoC Programmer4 EZ-Click™ 5.4 SP1 3.24.2 2.0 SP1 Production Production PSoC 3 Production Production PSoC 4 Production Production CapSense Plus™ 5 Production CapSense Express™ Production Download the latest PSoC software version here 1 All software and tool releases are backward compatible. The latest versions are recommended for new designs Creator is an Integrated Design Environment (IDE) that allows concurrent hardware and firmware design of PSoC 3 and PSoC 4 systems 3 PSoC Designer is an IDE that enables firmware design using a library of precharacterized peripherals for PSoC 1 systems 4 PSoC Programmer can be used with PSoC Designer and PSoC Creator to program and debug any design onto a PSoC device 5 EZ-Click is a Windows® GUI-based tool that enables development of CapSense MBR solutions. It allows you to set up sensor configuration, apply global system properties, monitor real-time sensor output, and run production-line system diagnostics 2 PSoC 001-90263 Rev *J Owner: THOR BUM: JHMU Automotive Products Roadmap 12 CY8CMBR3xxx Family Applications Family Table User interface panels Proximity-based lighting control Door and window controls Sunroof control Infotainment systems MPN CapSense Buttons GPOs Proximity Sensors Communication Interface Buzzer 10 11 16 5 0 8 2 2 2 I2C I2C I2C Y Y Y CY8CMBR3110 CY8CMBR3106S CY8CMBR3116 Features Block Diagram CapSense® with SmartSense™ Auto-tuning1 Up to 16 buttons, or 8 buttons and 8 LEDs Up to two 5-segment sliders SmartSense Auto-tuning eliminates manual tuning2 Enhanced User Interface Features Proximity sensing distance of up to 30 cm Water tolerance LED control Buzzer output Register-Configurable3 Register-configurability with EZ-Click™4 software tool Packages 16-pin SOIC, 24-pin QFN CY8CMBR3xxx 1.71 5.5 V 16 Internal Voltage Regulator CPU Configuration Memory Owner: THOR BUM: JHMU I2C Driven Shield Shield PWM Buzzer 9 16 CapSense + SmartSense GPOs 8 Sensors Contact Sales CapSense algorithm that automatically sets sensing parameters for optimal performance after design 2 The manual process of setting sensing parameters for optimal performance after design 3 A CapSense solution that can implement specific features without the need for firmware development 4 A PC-based software tool that is used for the initial configuration of CapSense MBR solutions 5 External Reset 001-90263 Rev *J 1 I2C Interface 32 8 1A Watchdog Timer 32 Collateral Datasheet, Design Guide and Design Toolbox: XRES5 Host Interrupt Sensors/LEDs Availability Sampling: Production: 6 Industrial: Industrial grade6: Now Automotive grades A7 and S8: Q3 2016 Q4 2016 -40ºC to +85ºC Automotive Products Roadmap 7 AEC-Q100: -40ºC to +85ºC 8 AEC-Q100: -40ºC to +105ºC 13 Automotive PSoC® 4100-Series Intelligent Analog Family Applications Block Diagram MCU and discrete analog replacement Digital and analog one-chip sensor hub User interface for heating, ventilation, air conditioning PSoC® 4 One-Chip Solution Programmable Analog Blocks Opamp x2 32-bit MCU Subsystem 24-MHz ARM® Cortex™-M0 CPU Up to 32KB flash and 4KB SRAM Programmable Analog Blocks Two comparators (CMP) Two opamps, configurable as PGAs1, CMPs, filters, etc. One 12-bit, 806-Ksps SAR2 ADC CapSense® with SmartSense™ Auto-tuning One Cypress Capacitive Sigma-Delta™ (CSD) controller Capacitive sensing supported on up to 24 pins Programmable Digital Blocks Four configurable 16-bit timer, counter or pulse-width modulator (TCPWM) blocks Two configurable serial communication blocks (SCBs): I2C master or slave, SPI master or slave, UART or LIN slave Packages 28-pin SSOP Cortex®-M0 24 MHz Flash (16KB to 32KB) SRAM (4KB) Datasheet: Automotive PSoC 4100 Datasheet Technical Reference Manual: PSoC 4 Sampling: Production: 001-90263 Rev *J gain amplifier approximation register Owner: THOR BUM: JHMU 3 Industrial: ADC CSD Programmable Digital Blocks TCPWM x4 SCB x2 Segment LCD Drive GPIO x4 GPIO x6 GPIO x4 GPIO x4 Availability 2 Successive CMP x2 GPIO x6 SAR2 Serial Wire Debug Collateral 1 Programmable Advanced High-Performance Bus (AHB) Features I/O Subsystem Programmable Interconnect and Routing MCU Subsystem Now Now -40ºC to +85ºC Automotive Products Roadmap 14 Automotive PSoC® 4200-Series Programmable Digital Family Applications Block Diagram MCU and discrete analog replacement Digital and analog one-chip sensor hub User interface for heating, ventilation, air conditioning PSoC® 4 One-Chip Solution Programmable Analog Blocks Opamp x2 32-bit MCU Subsystem 48-MHz ARM® Cortex™-M0 CPU Up to 32KB flash and 4KB SRAM Programmable Analog Blocks Two comparators (CMP) Two opamps, configurable as PGAs1, CMPs, filters, etc. One 12-bit, 1-Msps SAR2 ADC CapSense® with SmartSense™ Auto-tuning One Cypress Capacitive Sigma-Delta™ (CSD) controller Capacitive sensing supported on up to 24 pins Programmable Digital Blocks Four universal digital blocks (UDBs): custom digital peripherals Four configurable TCPWM3 blocks: 16-bit timer, counter or PWM Two configurable serial communication blocks (SCBs): I2C master or slave, SPI master or slave, UART or LIN slave Packages 28-pin SSOP Cortex®-M0 48 MHz Flash (16KB to 32KB) SRAM (4KB) Serial Wire Debug Collateral Availability Preliminary Datasheet: Contact Sales Technical Reference Manual: PSoC 4 Sampling: Production: Advanced High-Performance Bus (AHB) Features CMP x2 I/O Subsystem GPIO x6 SAR2 ADC CSD Programmable Digital Blocks UDB x4 TCPWM3 x4 SCB x2 Segment LCD Drive Programmable Interconnect and Routing MCU Subsystem GPIO x4 GPIO x6 GPIO x4 GPIO x4 Now Now 1 Programmable gain amplifier approximation register 3 Timer, counter, pulse-width modulator 001-90263 Owner: THOR Rev *J BUM: JHMU 2 Successive Automotive Products Roadmap 15 Automotive CapSense Packages Package Pins Body Size Family Pitch PSoC 1 2XX45 LQFP QFN SOIC 24 40 56 16 20 28 48 64 7 x 7 mm 4 x 4 mm 6 x 6 mm 8 x 8 mm 150 Mil 210 Mil 5 x 10 mm 300 Mil 10 x 10 mm 0.5 mm 0.5 mm 0.75 mm 0.5 mm 1.27 mm 0.65 mm 0.65 mm 0.635 mm 0.5 mm 21X34 24X23 29X66 4000 TQFP 48 24894 PSoC 4 SSOP 41/42XX 1 Wettable flanks package to allow automated optical inspection (AOI) 001-90263 Owner: THOR Rev *J BUM: JHMU Automotive Products Roadmap 16 Automotive PSoC® Roadmap 001-90263 Rev *J Owner: THOR BUM: JHMU Automotive Products Roadmap 17 Automotive PSoC and MCU Portfolio 8-Bit 32-Bit ARM® Cortex®-M0/M0+ 32-Bit ARM® Cortex®-M3 32-Bit ARM® Cortex®-M4 32-Bit ARM® Cortex®-M7 High Analog Integration Ultra-Low-Power 8-/16-Bit Replacement Mid-Range Performance High Performance Next Generation Analog and Digital Integration Programmable System-on-Chip (PSoC) is the world’s only programmable embedded system-on-chip integrating an MCU core, PABs1, PDBs2, programmable interconnect and routing, and CapSense capacitive sensing Flexible MCU (FM) is a portfolio of high-performance ARM® Cortex®-M-based MCUs for industrial and consumer applications PSoC 5LP Cortex®-M3 80 MHz, 256KB Flash 20 PAB1, 30 PDB2, 72 I/Os PSoC 4 Cortex®-M0 48 MHz, 128KB Flash Up to 13 PAB1, 16 PDB2, 51 I/Os PSoC 3 8051 CPU 67 MHz, 64KB Flash Up to 19 PAB1, 30 PDB2, 72 I/Os PSoC 1 M8C CPU 24 MHz, 32KB Flash 16 PAB1, 16 PDB2, 56 I/Os PSoC 7 Cortex®-M7 NDA Required, Contact Sales PSoC 6 Cortex®-M4 and Cortex®-M0+ NDA Required, Contact Sales FM7 MCUs Cortex®-M7 NDA Required, Contact Sales FM4 MCUs Cortex®-M4 200 MHz, 2MB Flash, 190 I/Os FM3 MCUs Cortex®-M3 144 MHz, 1.5MB Flash, 154 I/Os FM0+ MCUs Cortex®-M0+ 40 MHz, 512KB Flash, 102 I/Os PSoC Analog Coprocessor CY8C4Axx NDA Required, Contact Sales Production Sampling Development Concept 1 A programmable analog block that is configured using PSoC software to create analog front ends, signal conditioning circuits with opamps and filters 2 A programmable digital block that is configured using PSoC software to implement custom digital peripherals and glue logic 001-90263 Rev *J Owner: THOR BUM: JHMU Automotive Products Roadmap Industrial Automotive Availability QQYY QQYY 18 Automotive Portfolio: PSoC® 1 M8C Core | 24 MHz PSoC MCU Programmable Digital Intelligent Analog Performance Analog Analog: 2x CMP1 Analog: 1x/2x CMP1, 4xSC/CT PAB2 Interfaces: I2C, SPI, UART Analog: 2x/4x CMP1, 6xSC/CT PAB2, PGA3 Interfaces: I2C, SPI, UART Analog: 4x CMP1, 12x/16x SC/CT PAB2, PGA3 Interfaces: I2C, SPI, UART Interfaces: I2C, SPI CY8C29x66 32K/2K4, 44 GPIOs5 1x14-bit ΔƩ ADC6 Grades: A7 and E8 CY8C27x43 32K/2K4, 44 GPIOs5 CapSense, 1x14-bit ΔƩ ADC6 CY8C24894 16K/1K4, 56 GPIOs5 CapSense, 2x14-bit SAR ADC6 Grade: A7 CY8C28xxx 16K/1K4, 44 GPIOs5 CapSense, 4x14-bit ΔƩ ADC6 Performance CY8C2xx45 16K/1K4, 38 GPIOs5 CapSense, 1x10-bit SAR ADC6 Grades: A7 and E8 CY8C21x34 8K/0.5K4, 28 GPIOs5 CapSense, 1x10-bit ADC6 Grades: A7 and E8 CY8C24x23 4K/0.25K4, 24 GPIOs5 CapSense, 1x14-bit ΔƩ ADC6 Grades: A7 and E8 CY8C23x33 8K/0.25K4, 26 GPIOs5 CapSense, 1x 8-bit SAR ADC6 CY8C24x93 32K/2K4, 36 GPIOs5 1x10-bit ADC6 CY8C21x23 4K/0.25K4, 16 GPIOs5 1x10-bit ADC6 Integration 1 Comparator 6 Analog-to-digital 2 Switched capacitor/continuous time programmable analog block 3 Programmable gain amplifier 4 Flash KB/SRAM KB 5 General-purpose input/output pins 001-90263 Rev *J Owner: THOR BUM: JHMU converter: Includes incremental, successive approximation register (SAR) or Delta-Sigma (ΔƩ) ADCs 7 AEC-Q100: -40ºC to +85ºC 8 AEC-Q100: -40ºC to +125ºC Automotive Products Roadmap Production Sampling Development Concept Industrial Automotive Availability QQYY QQYY 19 Automotive Portfolio: PSoC® 4 ARM® Cortex®-M0/M0+ | CapSense® | Timer/Counter/PWM PSoC MCU PSoC 4000 Intelligent Analog PSoC 4100 BL = BLE-Series Programmable Digital PSoC 4200 S = S-Series M = M-Series CY8C4248-L 48-MHz M0, 256K/32K1 CMP2, Opamp, ADC3 SCB4, IDAC5, UDB7, CAN8 USB CY8C4248-BL 48-MHz M0, 256K/32K1 CMP2, Opamp, ADC3 SCB4, IDAC5, BLE6, UDB7 CY8C4247-M Q316 48-MHz M0, 128K/16K1 CMP2, Opamp, ADC3 SCB4, IDAC5, UDB7, CAN8 Grades: A10 and S11 CY8C4247-L 48-MHz M0, 128K/16K1 CMP2, Opamp, ADC3 SCB4, IDAC5, UDB7, CAN8, USB CY8C4247-BL 48-MHz M0, 128K/16K1 CMP2, Opamp, ADC3 SCB4, IDAC5, BLE6, UDB7 NEW CY8C4246-L 48-MHz M0, 64K/8K1 CMP2, Opamp, ADC3 SCB4, IDAC5, UDB7, CAN8 USB CY8C4128-BL 24-MHz M0, 256K/32K1 CMP2, Opamp, ADC3 SCB4, IDAC5, BLE6 CY8C4127-M Q316 24-MHz M0, 128K/16K1 CMP2, Opamp, ADC3 SCB4, IDAC5 Grades: A10 and S11 NEW NEW Flash NEW NEW Q316 CY8C4045-S 48-MHz M0+, 32K/4K1 NDA Contact Sales NEW Q316 CY8C4024-S 24-MHz M0+, 16K/2K1 NDA Contact Sales CY8C4127-BL 24-MHz M0, 128K/16K1 CMP2, Opamp, ADC3 SCB4, IDAC5, BLE6 CY8C4126-M Q316 24-MHz M0, 64K/8K1 CMP2, Opamp, ADC3 SCB4, IDAC5 Grades: A10 and S11 NEW CY8C4125 24-MHz M0, 32K/4K1 CMP2, Opamp, ADC3 SCB4, IDAC5 Grades: A10 and S11 NEW CY8C4124 24-MHz M0, 16K/4K1 CMP2, Opamp, ADC3 SCB4, IDAC5 Grades: A10 and S11 NEW Q316 CY8C4146-S 48-MHz M0+, 64K/4K1 NDA Contact Sales Q316 CY8C4125-S 24-MHz M0+, 32K/4K1 NDA Contact Sales Q316 L = L-Series CY8C4246-M Q316 48-MHz M0, 64K/8K1 CMP2, Opamp, ADC3 SCB4, IDAC5, UDB7 Grades: A10 and S11 CY8C4245 48-MHz M0, 32K/4K1 CMP2, Opamp, ADC3 SCB4, IDAC5, UDB7 Grades: A10 and S11 CY8C4124-S 24-MHz M0+, 16K/2K1 NDA Contact Sales CY8C4244 48-MHz M0, 16K/4K1 CMP2, Opamp, ADC3 SCB4, IDAC5, UDB7 Grades: A10 and S11 7 Universal 10 CY8C4014 16-MHz M0, 16K/2K1 CMP2, I2C, IDAC5 Grades: A10 and S11 Production Sampling Development Concept 1 Flash KB/SRAM KB 2 Comparator 3 Analog-to-digital converter 001-90263 Rev *J 4 Serial communication block 5 Current-output DAC 6 Bluetooth Low Energy Owner: THOR BUM: JHMU digital block 8 Controller area network 9 Programmable I/Os AEC-Q100: -40ºC to +85ºC Industrial 11 AEC-Q100: -40ºC to +105ºC Automotive Availability Automotive Products Roadmap QQYY QQYY 20 Automotive Portfolio: PSoC® Software1 Software PSoC Creator™2 PSoC Designer™ 3.3 CP2 Current Version PSoC 1 PSoC 4 3 PSoC Programmer4 EZ-Click™ 5.4 SP1 3.24.2 2.0 SP1 Production Production Production 5 Production Download the latest PSoC software version here 1 All software and tool releases are backward compatible. The latest versions are recommended for new designs Creator is an Integrated Design Environment (IDE) that allows concurrent hardware and firmware design of PSoC 3 and PSoC 4 systems 3 PSoC Designer is an IDE that enables firmware design using a library of precharacterized peripherals for PSoC 1 systems 4 PSoC Programmer can be used with PSoC Designer and PSoC Creator to program and debug any design onto a PSoC device 5 EZ-Click is a Windows® GUI-based tool that enables development of CapSense MBR solutions. It allows you to set up sensor configuration, apply global system properties, monitor real-time sensor output, and run production-line system diagnostics 2 PSoC 001-90263 Rev *J Owner: THOR BUM: JHMU Automotive Products Roadmap 21 Automotive PSoC® 4100-Series Intelligent Analog Family Applications Block Diagram MCU and discrete analog replacement Digital and analog one-chip sensor hub User interface for heating, ventilation, air conditioning PSoC® 4 One-Chip Solution Programmable Analog Blocks Opamp x2 32-bit MCU Subsystem 24-MHz ARM® Cortex™-M0 CPU Up to 32KB flash and 4KB SRAM Programmable Analog Blocks Two comparators (CMP) Two opamps, configurable as PGAs1, CMPs, filters, etc. One 12-bit, 806-Ksps SAR2 ADC CapSense® with SmartSense™ Auto-tuning One Cypress Capacitive Sigma-Delta™ (CSD) controller Capacitive sensing supported on up to 24 pins Programmable Digital Blocks Four configurable 16-bit timer, counter or pulse-width modulator (TCPWM) blocks Two configurable serial communication blocks (SCBs): I2C master or slave, SPI master or slave, UART or LIN slave Packages 28-pin SSOP Cortex®-M0 24 MHz Flash (16KB to 32KB) SRAM (4KB) Advanced High-Performance Bus (AHB) Features CMP x2 I/O Subsystem GPIO x6 SAR2 ADC CSD Programmable Digital Blocks TCPWM x4 SCB x2 Segment LCD Drive Programmable Interconnect and Routing MCU Subsystem GPIO x4 GPIO x6 GPIO x4 Serial Wire Debug GPIO x4 Collateral Availability Preliminary Datasheet: Automotive PSoC 4100 Datasheet Technical Reference Manual: PSoC 4 Sampling: Production: Now Now 1 Programmable 2 Successive 001-90263 Rev *J gain amplifier approximation register Owner: THOR BUM: JHMU Automotive Products Roadmap 22 Automotive PSoC® 4200-Series Programmable Digital Family Applications Block Diagram MCU and discrete analog replacement Digital and analog one-chip sensor hub User interface for heating, ventilation, air conditioning PSoC® 4 One-Chip Solution Programmable Analog Blocks Opamp x2 32-bit MCU Subsystem 48-MHz ARM® Cortex™-M0 CPU Up to 32KB flash and 4KB SRAM Programmable Analog Blocks Two opamps, configurable as PGAs1, CMPs, filters, etc. One 12-bit, 1-Msps SAR2 ADC Two comparators (CMP) CapSense® with SmartSense™ Auto-tuning One Cypress Capacitive Sigma-Delta™ (CSD) controller Capacitive sensing supported on up to 24 pins Programmable Digital Blocks Four universal digital blocks (UDBs): custom digital peripherals Four configurable TCPWM3 blocks: 16-bit timer, counter or PWM Two configurable serial communication blocks (SCBs): I2C master or slave, SPI master or slave, UART or LIN slave Packages 28-pin SSOP Cortex®-M0 48 MHz Flash (16KB to 32KB) SRAM (4KB) Serial Wire Debug Collateral Availability Preliminary Datasheet: Contact Sales Technical Reference Manual: PSoC 4 Sampling: Production: Advanced High-Performance Bus (AHB) Features CMP x2 I/O Subsystem GPIO x6 SAR2 ADC CSD Programmable Digital Blocks UDB x4 TCPWM3 x4 SCB x2 Segment LCD Drive Programmable Interconnect and Routing MCU Subsystem GPIO x4 GPIO x6 GPIO x4 GPIO x4 Now Now 1 Programmable gain amplifier approximation register 3 Timer, counter, pulse-width modulator 001-90263 Owner: THOR Rev *J BUM: JHMU 2 Successive Automotive Products Roadmap 23 Automotive PSoC Packages Package Pins Body Size Family Pitch PSoC 1 2XX45 LQFP QFN SOIC 24 40 56 16 20 28 48 64 7 x 7 mm 4 x 4 mm 6 x 6 mm 8 x 8 mm 150 Mil 210 Mil 5 x 10 mm 300 Mil 10 x 10 mm 0.5 mm 0.5 mm 0.75 mm 0.5 mm 1.27 mm 0.65 mm 0.65 mm 0.635 mm 0.5 mm 21X34 24X23 29X66 4000 TQFP 48 24894 PSoC 4 SSOP 41/42XX 1 Wettable flanks package to allow automated optical inspection (AOI) 001-90263 Owner: THOR Rev *J BUM: JHMU Automotive Products Roadmap 24 Automotive Asynchronous SRAM 001-90263 Rev *J Owner: BUM: JHMU Automotive Products Roadmap 25 Automotive Portfolio: Asynchronous SRAM Low-Power SRAM (MoBL®1) Fast SRAM 32Mb-128Mb Non-ECC3 ECC3 CY7C107x 32Mb; 3.3 V 12 ns; x8, x16 2Mb-16Mb Serial SRAM Non-ECC3 ECC3 ECC3 Quad-SPI4, ECC3 CY6218x 64Mb; 2.5, 3.0 V 55 ns; x8, x16 Other densities NDA Contact Sales Other densities NDA Contact Sales Other densities NDA Contact Sales CY6217x 32Mb; 2.5, 3.0, 5.0 V 55 ns; x8, x16 CY7C106x 16Mb; 1.8-5.0 V 10 ns; x8, x16, x32 Grade: E5 CY6216x 16Mb; 3.0 V 45 ns; x8, x16 Grade: A6 NEW CY7C105x 8Mb; 1.8-5.0 V 10 ns; x8, x16, x32 Grade: E5 CY6215x 8Mb; 3.0, 5.0 V 45 ns; x16 Grades: A6 and E5 NEW CY7C104x 4Mb; 1.8-5.0 V 10 ns; x8, x16 Grade: A6 and E5 CY6214x 4Mb; 3.0, 5.0 V 45 ns; x8, x16 Grades: A6 and E5 NEW CY7C101x 2Mb; 1.8-5.0 V 10 ns; x8, x16 Grade: A6 and E5 CY6213x 2Mb; 3.0 V 45 ns; x8, x16 Grades: A6 and E5 NEW CY7C106x 16Mb; 1.8, 3.3 V 10 ns; x8, x16, x32 64Kb-1Mb PowerSnooze™2 SRAM NEW CY7C105x 8Mb; 3.3 V 10 ns; x8, x16 CY7C1012 12Mb; 3.3 V 10 ns; x24 CY7C104x 4Mb; 3.3, 5.0 V 10 ns; x8, x16 Grades: A6 and E5 CY7C1034 6Mb; 3.3 V 10 ns; x24 CY7C1011 2Mb; 3.3 V 10 ns; x16 Grades: A6 and E5 CY7C1024 3Mb; 3.3 V 10 ns; x24 CY7C1020 512Kb; 2.6, 3.3 V 15 ns; x16 Grade: E5 CY7C1019/21 1Mb; 2.6, 3.3, 5.0 V 10 ns; x8, x16 Grades: A6 and E5 CY6212x 1Mb; 3.0, 5.0 V 45 ns; x8, x16 Grades: A6 and E5 CY7C185 64Kb; 5.0 V 15 ns; x8 CY7C199 256Kb; 5.0 V 12 ns; x8 Grades: A6 and E5 CY62256 256Kb; 5.0 V 55 ns; x8 Grades: A6 and E5 NEW NEW CY6216x 16Mb; 1.8-5.0 V 45 ns; x8, x16, x32 Grade: A6 and E5 CY6215x 8Mb; 1.8-5.0 V 45 ns; x8, x16, x32 Grade: A6 and E5 CY6214x 4Mb; 1.8-5.0 V 45 ns; x8, x16 Grade: A6 and E5 Production Sampling Development Concept 1 More Battery Life™ SRAM with low-power sleep mode 2 Fast 001-90263 Rev *J Owner: NJX BUM: JHMU 3 4 Error-correcting code Serial peripheral interface 5 AEC-Q100: 6 AEC-Q100: -40ºC to +125ºC -40ºC to +85ºC Automotive Products Roadmap Industrial Automotive Availability QQYY QQYY 26 Fast SRAM with ECC Applications Family Table Infotainment systems Driver assistance Driver information Powertrain Telematics Density MPN Access Time 2Mb 4Mb 8Mb 16Mb CY7C101x CY7C104x CY7C105x CY7C106x 10 ns 10 ns 10 ns 10 ns Supply Current (Max. at 85ºC) 45 mA 45 mA 110 mA 110 mA Block Diagram Features Access time: 10 ns Multiple bus-width configurations: x8, x16, x32 Wide operating voltage range: 1.65-5.5 V Available in automotive temperature (A1 and E2) grades Industry-standard, RoHS-compliant packages Error-correcting code (ECC) to detect/correct single-bit errors Bit-interleaving to avoid multi-bit errors Packages: 48-pin VFBGA, 48-pin TSOP1 Fast SRAM with ECC SRAM Array 18-23 Address ECC Encoder Input Buffer 8, 16, 32 Data I/O Mux Address Decoder Sense Amps SRAM Array ECC Decoder Control Logic CE Preliminary Datasheet: 001-90263 Rev *J WE BHE3 BLE4 Availability Collateral 1 AEC-Q100: OE -40ºC to +85ºC Contact Sales 2 AEC-Q100: Owner: NJX BUM: JHMU -40ºC to +125ºC Sampling: Production: 3 Byte high enable Automotive Products Roadmap Now Now 4 Byte low enable 27 1 ® MoBL SRAM with ECC Applications Family Table Infotainment systems Telematics Features Density MPN 4Mb 8Mb 16Mb 32Mb 64Mb CY6214x CY6215x CY6216x CY6217x CY6218x Standby Current (Max. at 85ºC) 8 µA 9 µA 16 µA 58 µA 58 µA Standby Current (Typ. at 25ºC) 2.5 µA 3.0 µA 4.6 µA 9.0 µA 9.0 µA Block Diagram Access time: 45 ns for 16Mb Standby current: 16 µA for 16Mb Multiple bus-width configurations: x8, x16 and x32 Wide operating voltage range: 1.65-5.5 V Available in automotive temperature (A2 and E3) grades Industry-standard, RoHS-compliant packages Error-correcting code (ECC) to detect/correct single-bit errors Bit-interleaving to avoid multi-bit errors Packages: 48-pin VFBGA, 48-pin TSOP1 MoBL®1 SRAM with ECC SRAM Array 18-23 Address Address Decoder ECC Encoder Input Buffer 8, 16, 32 Data I/O Mux SRAM Array Sense Amps ECC Decoder Control Logic CE Collateral Battery Life™ 001-90263 Rev *J WE BHE4 BLE5 Availability Preliminary Datasheet: 1 More OE 2 AEC-Q100: Owner: NJX BUM: JHMU Contact Sales -40ºC to +85ºC Sampling: Production: 3 AEC-Q100: -40ºC to +125ºC 4 Byte high enable Automotive Products Roadmap Now (4Mb, 16Mb) Now (4Mb, 16Mb) 5 Byte low enable 28 Automotive Asynchronous SRAM Packages Package Balls/Pins SOIC 28 TSOP2 TSOP 32 28 32 48 32 44 48 8x 20 mm 12 x 18.4 mm 20.95 x 11.76 mm 10.1 x 18.4 mm 7.0 x 8.5 mm 0.5 mm 0.5 mm 1.27 mm 0.8 mm 0.75 mm Body Size 300 Mil 450 Mil 8x 13.4 mm Family Pitch 0.05 in 0.05 in 0.55 mm FAST (Non-ECC) 256Kb 512Kb 2Mb 4Mb 2Mb 4Mb 1Mb FAST (ECC) BGA 8Mb 16Mb Low-Power (Non-ECC) 256Kb 2Mb 4Mb 1Mb 001-90263 Rev *J 8Mb Low-Power (ECC) 4Mb 16Mb Owner: NJX BUM: JHMU Automotive Products Roadmap 29 Automotive Synchronous SRAM 001-90263 Rev *J Owner: BUM: JHMU Automotive Products Roadmap 30 Automotive Portfolio: Synchronous SRAM High Random Transaction Rate (RTR)1 | Low Latency | High Bandwidth Standard Sync and NoBL™ with ECC2 QDR® -II/ DDR-II QDR-II+/ DDR-II+ QDR-II+X/ DDR-II+X QDR-IV Max RTR1: 250 MT/s Max BW: 18 Gbps Latency: 1 Cycle Pipeline and Flow-through Modes Max RTR1: 250 MT/s Max BW: 18 Gbps Latency: 1 Cycle Pipeline and Flow-through Modes Max RTR1: 666 MT/s Max BW: 47.9 Gbps Latency: 1.5 Cycles CIO3 and SIO4 Max RTR1: 666 MT/s Max BW: 79.2 Gbps Latency: 2 or 2.5 Cycles CIO3and SIO4, ODT5 Max RTR1: 900 MT/s Max BW: 91.1 Gbps Latency: 2.5 Cycles SIO4, ODT5 Max RTR1: 2.1 GT/s Max BW: 153.5 Gbps Latency: 5 or 8 Cycles Dual-Port Bidirectional ODT5 CY7C161/2xKV18 144Mb; 250-333 MHz 1.8 V; x9, x18, x36 Burst 2, 4 CY7Cx4/5/6/7xKV18 144Mb; 300-550 MHz 1.8 V; x18, x36 Burst 2, 4 Density Standard Sync and NoBL™ CY7C41xKV13 144Mb; 667-1066 MHz 1.3 V; x18, x36 Burst 2 CY7C147/8xB 72Mb; 133-250 MHz 2.5, 3.3 V; x18, x36 CY7C147/8xK 72Mb; 133-250 MHz 2.5, 3.3 V; x18, x36, x72 CY7C151/2xKV18 72Mb; 250-333 MHz 1.8 V; x9, x18, x36 Burst 2, 4 CY7Cx54/5/6/7KV18 72Mb; 250-550 MHz 1.8 V; x18, x36 RH6; Burst 2, 4 CY7C156/7xXV18 72Mb; 366-633 MHz 1.8 V; x18, x36 Burst 2, 4 CY7C144/6xA 36Mb; 133-250 MHz 2.5, 3.3 V; x36, x72 CY7C144/6xK 36Mb; 133-250 MHz 2.5, 3.3 V; x18, x36 CY7C141/2xKV18 36Mb; 250-333 MHz 1.8 V; x8, x9, x18, x36 Burst 2, 4 CY7Cx24/5/6/7xKV18 36Mb; 400-550 MHz 1.8 V; x18, x36 Burst 2, 4 CY7C126/7x 36Mb; 366-633 MHz 1.8 V; x18, x36 Burst 2, 4 CY7C137/8xD 18Mb; 100-250 MHz 3.3 V; x18, x32, x36 CY7C137/8xK 18Mb; 100-250 MHz 2.5, 3.3 V; x18, x36 CY7C131/2/9xKV18 18Mb; 250-333 MHz 1.8 V; x8, x18, x36 Burst 2, 4 CY7Cx14/5/6/7xKV18 18Mb; 400-550 MHz 1.8 V; x18, x36 Burst 2, 4 CY7C136xC 9Mb; 100 MHz 3.3 V; x18, x36 Grade: E7 CY7C40xKV13 72Mb; 667-1066 MHz 1.3 V; x18, x36 Burst 2 CY7C1911xKV18 18Mb; 250-333 MHz 1.8 V; x9 Burst 2, 4 CY7C134xxG 4Mb; 100 MHz 3.3 V; x36 Grade: E7 Random Transaction Rate 1 Rate of truly random accesses to memory, expressed in transactions per second (MT/s, GT/s) 001-90263 Rev *J Owner: NJX BUM: JHMU 2 Error-correcting 3 Common 4 Separate I/O I/O code 5 On-die termination; parts are CY7C2x 6 Radiation hardened, military grade 7 AEC-Q100: -40ºC to +125ºC Automotive Products Roadmap Production Sampling Development Concept Industrial Automotive Availability QQYY QQYY 31 Automotive Synchronous SRAM Packages Package BGA TQFP Balls/Pins 165 100 Body Size 13 x 15 mm 14 x 20 mm 0.65 mm Family Pitch 1.0 mm Standard Sync Flow- through mode 4Mb 9Mb 001-90263 Rev *J Owner: NJX BUM: JHMU Automotive Products Roadmap 32 5 x 5 ball Automotive Nonvolatile RAM 001-90263 Rev *J Owner: BUM: JHMU Automotive Products Roadmap 33 Automotive Portfolio: nvSRAM High Density | High Speed 1 nvSRAM SPI nvSRAM LPC nvSRAM ParallelParallel nvSRAM CY14B116K/L 16Mb; 3.0 V 25, 45 ns; x8; RTC2 Ind3 CY14V116F/G 16Mb; 3.0, 1.8 V I/O 30 ns; ONFI4 1.0 x8, x16; Ind3 Higher Densities nvSRAM NDA Contact Sales CY14B104NA 4Mb; 3.0 V 25, 45 ns; x16; RTC2 Grade: E5 CY14B108K/L 8Mb; 3.0 V 25, 45 ns; x8; RTC2 Ind3 CY14B108M/N 8Mb; 3.0 V 25, 45 ns; x16; RTC2 Ind3 CY14B116M/N 16Mb; 3.0 V 25, 45 ns; x16; RTC2 Ind3 CY14B104K/LA 4Mb; 3.0 V 25, 45 ns; x8; RTC2 Ind3 CY14V104LA 4Mb; 3.0, 1.8 V I/O 25, 45 ns; x8 Ind3 CY14B104M/NA 4Mb; 3.0 V 25, 45 ns; x16; RTC2 Ind3 CY14V104NA 4Mb; 3.0, 1.8 V I/O 25, 45 ns; x16 Ind3 CY14V101PS 1Mb; 3.0, 1.8 V, 108 MHz QSPI7; RTC2 Ind3, Ext. Ind8 CY14V101QS 1Mb; 3.0, 1.8 V, 108 MHz QSPI7 Ind3, Ext. Ind8 CY14B101I 1Mb; 3.0 V 3.4 MHz I2C; RTC2 Ind3 CY14B101KA/LA 1Mb; 3.0 V 25, 45 ns; x8; RTC2 Ind3 CY14V101LA 1Mb; 3.0, 1.8 V I/O 25, 45 ns; x8 Ind3 CY14B101MA/NA 1Mb; 3.0 V 25, 45 ns; x16; RTC2 Ind3 CY14V101NA 1Mb; 3.0, 1.8 V I/O 25, 45 ns; x16 Ind3 CY14B101PA 1Mb; 3.0 V 40 MHz SPI; RTC2 Ind3 CY14B512P 512Kb; 3.0 V 40 MHz SPI; RTC2 Ind3 CY14B512I 512Kb; 3.0 V 3.4 MHz I2C; RTC2 Ind3 CY14B256KA/LA 256Kb; 3.0 V 25, 45 ns; x8; RTC2 Ind3 CY14V/U256LA 256Kb; 3.0, 1.8V I/O 35 ns; x8 Ind3 CY14E256LA 256Kb; 5.0 V 25, 45 ns; x8 Ind3 STK14C88-5 256Kb; 5.0 V 35, 45 ns; x8 Mil6 CY14B256P 256Kb; 3.0 V 40 MHz SPI; RTC2 Ind3 CY14B256I 256Kb; 3.0 V 3.4 MHz I2C; RTC2 Ind3 STK11C68-5 64Kb; 5.0 V 35, 55 ns; x8 Mil6 STK12C68-5 64Kb; 5.0 V 35, 55 ns; x8 Mil6 CY14B064P 64Kb; 3.0 V 40 MHz SPI; RTC2 Ind3 CY14B064I 64Kb; 3.0 V 3.4 MHz I2C; RTC2 Ind3 NEW 64Kb - 256Kb 512Kb - 16Mb CY14B116R/S 16Mb; 3.0 V 25, 45 ns; x32; RTC2 Ind3 Higher Densities nvSRAM NDA Contact Sales Production Sampling Development Concept 4 Open 1 Low-pin-count 2 Real-time 3 Industrial 001-90263 Rev *J clock grade: −40ºC to +85ºC Owner: MRAN BUM: CNX NAND flash interface 5 AEC-Q100: −40ºC to +125ºC 6 Military grade: −55ºC to +125ºC 7 Quad serial peripheral interface 8 Extended Industrial grade: −40ºC to +105ºC Automotive Products Roadmap Industrial Automotive Availability QQYY QQYY 34 Automotive nvSRAM Package Package BGA Balls 48 Body Size 6 x 10 mm Family Pitch 0.75 mm Parallel 4Mb 001-90263 Rev *J Owner: MRAN BUM: CNX Automotive Products Roadmap 35 Automotive Portfolio: F-RAM Low Power | High Endurance Processor Companion Wireless Memory Parallel F-RAM FM25H20/V20A 2Mb; H20: 2.7-3.6 V V20A: 2.0-3.6 V 40 MHz SPI; Ind2 CY15B104Q 4Mb; 2.0-3.6 V 40 MHz SPI; Ind2 Higher Densities F-RAM NDA Contact Sales FM22L16/LD16 4Mb; 2.7-3.6 V 55 ns; x8; Ind2 CY15B102Q 2Mb; 2.0-3.6 V 25 MHz SPI Grade: E3 FM25V10/VN10 1Mb; 2.0-3.6 V 40 MHz SPI; Grade: Ind2, A4 FM24V10/VN10 1Mb; 2.0-3.6 V 3.4 MHz I2C; Grade: Ind2, A4 FM28V102A 1Mb; 2.0-3.6 V 60 ns; x16; Ind2 FM28V202A 2Mb; 2.0-3.6 V 60 ns; x16; Ind2 FM25V05 512Kb; 2.0-3.6 V 40 MHz SPI; Grade: Ind2, A4 FM24V05 512Kb; 2.0-3.6 V 3.4 MHz I2C; Grade: Ind2, A4 CY15B101N 1Mb; 2.0-3.6 V 60 ns; x16 Grade: A4 CY15B102N 2Mb; 2.0-3.6 V 60 ns; x16 Grade: A4 FM25V02/W256 256Kb; V02: 2.0-3.6 V W256: 2.7-5.5 V 40 MHz SPI; Ind2, A4 FM24V02/W256 256Kb; V02: 2.0-3.6 V W256: 2.7-5.5 V 3.4 MHz I2C; Ind2, A4 FM33256 256Kb; 3.3V; 16 MHz SPI RTC5; Power Fail Watchdog; Counter; Ind2 FM28V020 256Kb; 2.0-3.6 V 70 ns; x8; Ind2 FM18W08 256Kb; 2.7-5.5 V 70 ns; x8; Ind2 FM25V01A 128Kb; 2.0-3.6 V 40 MHz SPI; Grade: Ind2, A4 FM24V01A 128Kb; 2.0-3.6 V 3.4 MHz I2C; Grade: Ind2, A4 FM31256/31(L)278 256Kb; 3.3, 5.0V; 1 MHz I2C; RTC5; Power Fail Watchdog; Counter; Ind2 FM1808B 256Kb; 5.0 V 70 ns; x8; Ind2 FM16W08 64Kb; 2.7-5.5 V 70 ns; x8; Ind2 FM25640/CL64 64Kb; 3.3, 5.0 V 20 MHz SPI; Grade: Ind2, E3 FM24C64/CL64 64Kb; 3.3, 5.0 V 1 MHz I2C; Grade: Ind2, E3 FM3164/31(L)276 64Kb; 3.3, 5.0 V; 1 MHz I2C; RTC5; Power Fail Watchdog; Counter; Ind2 FM25C160/L16 16Kb; 3.3, 5.0 V 20 MHz SPI; Grade: Ind2, E3 FM24C16/CL16 16Kb; 3.3, 5.0 V 1 MHz I2C; Grade: Ind2, A4 FM25040/L04 4Kb; 3.3, 5.0 V 20 MHz SPI; Grade: Ind2, E3 FM24C04/CL04 4Kb; 3.3, 5.0 V 1 MHz I2C; Grade: Ind2, A4 4Kb - 256Kb 512Kb - 4Mb LPC1 F-RAM Wireless Memory NDA Contact Sales Production Sampling Development Concept 1 Low-pin-count 2 Industrial grade −40ºC to +85ºC 3 AEC-Q100: −40ºC to +125ºC 001-90263 Rev *J Owner: MRAN BUM: CNX −40ºC to +85ºC 5 Real-time clock 4 AEC-Q100: Industrial Automotive Availability Automotive Products Roadmap QQYY QQYY 36 Automotive F-RAM Packages Package SOIC DFN EIAJ TSOP I TSOP II 8 32 44 Family Pins 8 8 LPC 4Kb 16Kb 64Kb 128Kb 256Kb 512Kb 1Mb 2Mb 4Kb 16Kb 64Kb 128Kb 256Kb 512Kb 1Mb 1Mb 2Mb I2C Parallel 001-90263 Rev *J Owner: MRAN BUM: CNX Automotive Products Roadmap 37 Automotive USB 001-90263 Rev *J Owner: BUM: JHMU Automotive Products Roadmap 38 Automotive Portfolio: USB Device Hub USB 2.0 USB 3.0 FX3: CYUSB301x 32-Bit Bus to USB 3.0 ARM9, 512KB RAM HX3: CYUSB33xx 4 Ports, Shared Link™1 BC 1.22, Ghost Charge™3 Grade A4 HX3C USB 3.1 Gen 1 Type-C Hub with PD NDA Contact Sales HX3PD USB 3.1 Gen 2 Type-C Hub with PD NDA Contact Sales FX2LP: CY7C6801x/53 16-Bit Bus to USB 2.0 8051, 16KB RAM HX2VL: CY7C656x4 4 Ports 4 Transaction Translators TX2UL: CY7C68003 ULPI10 PHY 13, 19.2, 24, 26 MHz HX2LP: CY7C656x1 4 Ports 1 Transaction Translator Bridge Host Storage Type-C CX3: CYUSB306x CSI-25 to USB 3.0 4 CSI-25 Lanes, 1 Gbps/Lane FX3S™: CYUSB303x 16-Bit Bus to USB 3.0 RAID6, Dual SDXC7/eMMC8 Grade A4 DX3 USB 3.0 to DSI9 TX NDA Contact Sales SD3: CYUSB302x SDXC7/eMMC8 to USB 3.0 RAID6 CCG1: CYPD1xxx USB Type-C Port Controller 2 PD Ports, 5 Profiles, 100 W Grade A4 CCG2: CYPD2xxx USB Type-C Cable Controller 1 PD Port, Termination, ESD Grade A4 CCG3 USB Type-C Port Controller NDA Contact Sales GX3: CYUSB361x USB 3.0 to Gigabit Ethernet NDA Contact Sales Bay™: CYWB016xBB HS USB OTG Dual SDXC7/eMMC8 Arroyo™, Astoria™: CYWB022xABS 16-Bit Bus to USB 2.0 8051, Dual SD/eMMC7 CCG4 USB Type-C Port Controller NDA Contact Sales NX2LP: CY7C6803x NAND Flash to USB 2.0 8051, 15KB RAM CCG5 USB Type-C AFE NDA Contact Sales USB 1.1 AT2LP: CY7C683xx Parallel ATA to USB 2.0 8051 enCoRe™ II: CY7C638xx M8C MCU, 20 GPIOs SPI, 8KB Flash USB-Serial: CY7C6521x UART/SPI/I2C to USB 2 Channels, CapSense® SL811HS FS USB Host/Device 256Byte RAM enCoRe III: CY7C64215 M8C MCU, 50 GPIOs, ADC I2C/SPI, 16KB Flash USB-to-UART (Gen 2): CY7C65213 3 Mbps, 8 GPIOs EZ-Host: CY7C67300 4 Ports, FS USB OTG 32 GPIOs Grade: A4 enCoRe V: CY7C643xx M8C MCU, 36 GPIOs, ADC I2C/SPI, 32KB Flash USB-to-UART (Gen 1): CY7C64225 230 Kbps EZ-OTG™: CY7C67200 2 Ports, FS USB OTG 25 GPIOs 1 Simultaneous USB 2.0 and USB 3.0 traffic on the same port 2 Battery Charging specification v1.2 3 Enables USB charging without host connection 001-90263 Rev *J Owner: NJX BUM: JHMU AEC-Q100: −40ºC to +85ºC Serial Interface v2.0 6 Redundant array of independent disks 7 SD extended capacity 4 5 Camera Production Sampling Development Concept 8 Embedded MultiMedia Card Serial Interface 10 UTMI low-pin interface 9 Display Automotive Products Roadmap Type-C product applies to any USB speed Industrial Automotive Availability QQYY QQYY 39 Automotive HX3: USB 3.1 Gen 1 Hub Applications Block Diagram Upstream Port Automotive infotainment EEPROM 2 2 4 HX3 Hub SS3 PHY USB 2.0 PHY 8 MCU USB 3.1 Gen 1 PHY I2C 32 16 32 Features SuperSpeed Hub Controller USB 3.1 Gen 1-compliant four-port Hub Controller USB-IF certified (Test ID: 330000047) WHQL certified for Windows 7, Window 8, Windows 8.1 Shared Link™: Supports simultaneous USB 2.0 and USB SuperSpeed (SS) Devices on the same port Ghost Charge™: Enables USB charging while the Hub is disconnected from a USB Host Charging Standard support: USB-IF Battery Charging v1.2 Apple Charging Standard Charging an OTG Host in an ACA-Dock Programming of external EEPROM via USB Configurable USB SS & USB 2.0 PHY. Drives 11ʺ trace 100-BGA (6 x 6 x 1.0 mm) 16 32 Buffers 4x TT1 Repeater 16 32 Routing Logic Routing Logic 32 16 USB 3.1 Gen 1 PHY SS3 PHY USB 3.1 Gen 1 PHY USB 2.0 PHY SS3 PHY 4 2 Downstream Port 1 Collateral 4 USB 3.1 Gen 1 PHY USB 2.0 PHY SS3 PHY 2 4 Downstream Port 2 USB 3.1 Gen 1 PHY USB 2.0 PHY SS3 PHY 2 Downstream Port 3 4 USB 2.0 PHY 2 Downstream Port 4 Availability Datasheet: Application Note: Kits: Configuration Utility: HX3 Datasheet HX3 Hardware Design Guide CY4609, CY4603, CY4613 Blaster Plus2 1 2 Transaction translator 001-90263 Rev *J USB 2.0 Hub Controller Owner: NJX BUM: JHMU Production: Q4 2016 A Cypress GUI-based PC application for setting HX3 configuration parameters Automotive Products Roadmap 3 SuperSpeed 40 Automotive CCG2: USB Type-C and PD Port Controller Applications Block Diagram USB Type-C EMCA, Powered Accessories, UFP, DFP, DRP MCU Subsystem Features Integrated Digital Blocks I/O Subsystem CC7 Collateral TCPWM6 48 MHz Flash (32KB) SRAM (4KB) VCONN1 SCB1 SPI, UART) VCONN2 SCB1 (I2C, SPI, UART) Profiles and Configurations Baseband MAC Baseband PHY Programmable I/O Matrix CORTEX-M0 (I2C, Advanced High-Performance Bus (AHB) 32-bit MCU Subsystem 48-MHz ARM® Cortex® -M0 CPU with 32KB flash and 4KB SRAM Integrated Digital Blocks Integrated timers, counters and pulse-width modulators Two SCBs1 configurable to I2C, SPI or UART modes Type-C Support Integrated transceiver, supporting one Type-C port Integrated DFP (RP2), UFP (RD3), EMCA (RA4) termination resistors Power Delivery (PD) Support Standard power profiles Low-Power Operation Two independent VCONN rails with integrated isolation Independent supply voltage pin for GPIO5 2.7-V to 5.5-V operation Sleep: 2.0 mA; Deep Sleep: 2.5 µA System-Level ESD on CC6 and VDD Pins ±8-kV contact, ±15-kV Air Gap IEC61000-4-2 level 4C Package 24-pin 4mm x 4mm QFN with 0.55mm pin pitch Datasheet: Reference Design Kit: CCG2: USB Type-C Port Controller With PD VDDIO GPIO5 Port Integrated RP2, RD3, RA4 Serial Wire Debug Availability CCG2 Datasheet CCG2 RDK communication block configurable as UART, SPI or I 2C Termination resistor read as a DFP 001-90263 Owner: NJX Rev *J BUM: JHMU Sampling: Production: 1 Serial 3 2 4 Termination Industrial grade: Now Q2 2017 5 General-purpose input/output Termination resistor read as a UFP 6 Timer, counter, pulse-width modulation block resistor read as an EMCA Automotive Products Roadmap 7 Configuration Channel 41 Automotive USB Packages Package TQFP Pins Body Size Functionality Family Pitch Hub HX3 CYUSB33XX Host EZ-Host CY7C67300 Storage FX3S CYUSB303X Type-C CCG2 CYPD2XX 001-90263 Rev *J Owner: NJX BUM: JHMU BGA QFN 100 100 121 24 14 x 14 mm 6 x 6 mm 10 x 10 mm 4 x 4 mm 0.5 mm 0.5 mm 0.8 mm 0.5 mm Automotive Products Roadmap 42 Automotive Timing Solutions 001-90263 Rev *J Owner: BUM: JHMU Automotive Products Roadmap 43 Automotive Portfolio: Timing Solutions Clock Generators EMI Reduction Q316 CY274x Max. Frequency: 700 MHz 7 Outputs; PCIe 3.0; 4 PLL 0.7-ps RMS Jitter1; Ind2; Auto A3 Standard Performance High Performance NEW CY276x Max. Frequency: 700 MHz 4-8 Outputs; PCIe 3.0, 10GbE; 2 PLL 0.7-ps RMS Jitter1; Ind2; Auto A3 Non-EMI Reduction PLL ICs CY294x/ CY5107 Max. Frequency: 2.1 GHz 1 Output; 40/100 GbE; 1 PLL 0.15-ps RMS Jitter1; Ind2 MB15F63UL Max. Input Frequency: 2 GHz Sigma-Delta and Integer PLL; -88.5 dBc/Hz CNR4; Ind2; Zero/Non-Zero Delay Buffer CY2DLx/DMx/DPx/CPx Max. Frequency: 1.5 GHz 2-10 Outputs; LVDS, LVPECL, CML 0.05-ps RMS Jitter1; Ind2 CY314X/CY344X Max. Frequency: 2.1 GHz 12 Outputs; 1-4 PLL; Hitless Switching5 0.15-ps RMS Jitter1; Ind2 CY2Xx (FleXO™) Max. Frequency: 690 MHz 1 Output; Frequency Margining 0.6-ps RMS Jitter1; Ind2 CY254x/CY251x Max. Frequency: 166 MHz 3-9 Outputs; 1-4 PLL; I2C 100-ps CCJ4; Ind2 CY2239x/CY229x/CY2238x Max. Frequency: 200 MHz 3-6 Outputs; 3-4 PLL; I2C 400-ps CCJ6; Ind2; Auto E7 MB15E07SL/05SL/03SL Max. Input Frequency: 2.5GHz 1 PLL; < 4mA PSC8 ; Ind2; CY230x/EP0x Max. Frequency: 220 MHz 5-9 Outputs; LVCMOS 22-ps CCJ6; Ind2; Auto A3 CY22800/801/2429x Max. Frequency: 200 MHz 2-4 Outputs; 1 PLL; PCIe 1.1 250-ps CCJ6; Ind2, Auto A3 CY22050/150 Max. Frequency: 200 MHz 3-6 Outputs; 1 PLL 250-ps CCJ6; Ind2 MB15E07SR/06SR/05SR Max. Input Frequency: 3GHz 1 PLL; -86 dBc/Hz CNR4 ; Ind2 CY230xNZ Max. Frequency: 133 MHz 4-18 Outputs; LVCMOS 250-ps CCJ6; Ind2 MB88151Ax/2Ax/3Ax/4Ax Max. Frequency: 134 MHz 1 Output; 1 PLL; < 200-ps CCJ6; Ind2; MB15F78UL/73UL/72UL Max. Input Frequency: 2.6 GHz 2 PLL; < 2.8 mA PSC8; Ind2; CY23S02/05/08/09/FP12 Max. Frequency: 200 MHz 2-12 Outputs; Spread Aware 200-ps CCJ6; Ind2 MB88155x Max. Frequency: 80 MHz 1 Output; 1 PLL; < 200-ps CCJ6; Ind2; MB15F07SL Max. Input Frequency: 1.1 GHz 2 PLL; < 5 mA PSC8; Ind2; CY7B99x (RoboClock™) Max. Frequency: 200 MHz 8-18 Outputs; Configurable Skew 50-ps CCJ6; Ind2 1 5 2 Industrial 6 Cycle-to-cycle Integrated phase noise across 12-kHz to 20-MHz offset grade: -40ºC to +85ºC 3 AEC-Q100: -40ºC to +85ºC 4 Carrier-to-noise ratio 001-90263 Rev *J Clock Buffers Owner: NJX BUM: JHMU Automatic clock switching on failure of a clock source jitter 7 AEC-Q100: -40ºC to +125ºC 8 Power supply current Automotive Products Roadmap Production Sampling Development Concept Industrial Automotive Availability QQYY QQYY 44 High Performance 4-PLL Clock Generator (CY274x) Applications Block Diagram Infotainment systems High-Performance 4-PLL Clock Generator PLL 1 Block Divider Out1 Divider PLL Out2 Divider Divider Features Out3P XIN1 High frequency: 700-MHz differential, 250-MHz single-ended Pin select and I2C programming Seven outputs: Three configurable as differential or single-ended Four single-ended Reference clock support for PCIe 3.0, SATA 2.0 and 10 GbE RMS phase jitter <0.7 ps Additional features: Configurable as zero or non-zero delay buffer Glitch-free frequency switching Frequency select Early/late clocks PLL cascading Voltage-controlled frequency synthesis XOUT2 Input Block IN1P3 PLL 2 Block Out4N Out5P SCLK4 SDAT4 VIN5 FS16 Memory and Control Logic PLL 3 Block Out5N Output Bank 2 Out6P FS06 Out6N PLL 4 Block Out7 Availability Preliminary Datasheet: Contact Sales Contact Sales 1 4 Serial 2 5 Voltage Crystal input Crystal output 3 Reference clock inputs Owner: NJX BUM: JHMU Out4P IN1N3 Collateral 001-90263 Rev *J Output Bank 1 Automotive Products Roadmap port input pin for VCFS 6 Frequency select inputs 45 Automotive Timing Solutions Packages SOIC TSSOP QFN 8 16 48 Body Size 150 Mil 4.4 x 5.0 mm 7 x 7 mm Functionality Pitch 0.05 in 0.65 mm 0.5 mm Clock Buffer CY2305 Clock Generators CY22393 CY24293 Package Pins CY274X 001-90263 Rev *J Owner: NJX BUM: JHMU Automotive Products Roadmap 46 Automotive PMIC 001-90263 Rev *J Owner: KOKU BUM: KINA Automotive Products Roadmap 47 Automotive PMIC1 Family Portfolio ADAS2 High-End Instrument Cluster Mid-Range NEW NEW CYxxx1 Boost+Buck Cnv3 12 V Vbat4, 4 A Output 20-pin TSSOP NEW Low-End Body Control Module CYxxx2 Multi-SMPS5 12 V Vbat4 High Output Current NEW S6BP203A 1xBuck-boost Cnv3, PG6 12 V Vbat4, 3.3 V/2.4 A Output 16-pin TSSOP Q316 S6BP502A 3xSMPS5 SSCG7, PG6 12 V Vbat4, 2.0 A Output 32-pin Side-Wettable8 QFN NEW CYxxx1 Boost+Buck Cnv3 12 V Vbat4, 4 A Output 20-pin TSSOP CYxxx3 Multi-SMPS5 and LDO 3.0-5.5 V input NEW NEW S6BP401A 4xSMPS5, 2xLDO WDT9, PG6 5 V Input, 3.0 A Output 40-pin QFN S6BP203A 1xBuck-boost Cnv3, PG6 12 V Vbat4, 3.3 V/2.4 A Output 16-pin TSSOP S6BP202A 1xBuck-boost Cnv3, PG6 12 V Vbat4, 5 V/2.4 A Output 16-pin TSSOP Q316 S6BP502A 3xSMPS5 SSCG7, PG6 12 V Vbat4, 2.0 A Output 32-pin Side-Wettable8 QFN NEW NEW S6BP201A 1xBuck-boost Cnv34, PG6 12 V Vbat4, 5 V/1 A Output 16-pin TSSOP Q316 S6BP501A 3xSMPS5 SSCG7, PG6 12 V Vbat4, 1.4 A Output 32-pin Side-Wettable8 QFN NEW S6BP202A 1xBuck-boost Cnv3, PG6 12 V Vbat4, 5 V/2.4 A Output 16-pin TSSOP NEW S6BP202A 1xBuck-boost Cnv3, PG6 12 V Vbat4, 5 V/2.4 A Output 16-pin TSSOP NEW S6BP201A 1xBuck-boost Cnv3, PG6 12 V Vbat4, 5 V/1 A Output 16-pin TSSOP Q316 S6BP501A 3xSMPS5 SSCG7, PG6 12 V Vbat4, 1.4 A Output 32-pin Side-Wettable8 QFN NEW NEW S6BP401A 4xSMPS5, 2xLDO WDT9, PG6 5 V Input, 3.0 A Output 40-pin QFN S6BP201A 1xBuck-boost Cnv3, PG6 12 V Vbat4, 5 V/1 A Output 16-pin TSSOP NEW S6BP201A 1xBuck-boost Cnv34, PG6 12 V Vbat4, 5 V/1 A Output 16-pin TSSOP Market Segment 1 Power Management IC: An IC that converts extremely fluctuating automobile power to safe, stable power for ECUs 2 Advanced Driver Assistance Systems 3 Converter: A general-purpose regulator IC that integrates power MOSFETs 4 Battery voltage 5 Switch-Mode Power Supply: A general-purpose regulator IC that uses a switching circuit to up-convert and/or down-convert a voltage source to a different voltage for powering other ICs 6 Power Good: An output signal that PMICs provide to signify that the supplied power by PMICs is proper and ready 7 Spread Spectrum Clock Generator 8 A package whose flanks are processed to improve soldering adherence and to simplify the optical inspection, which follows soldering 9 Watchdog timer Production Sampling Development Concept Industrial Automotive Availability 001-90263 Rev *J Owner: KOKU BUM: KINA Automotive Products Roadmap QQYY QQYY 48 One-Channel Automotive PMIC1 Automotive PMIC1 Family | S6BP20x Applications Family Table General-purpose automotive: Instrument cluster, body control, ADAS2 Features 1-Channel PMIC: Synchronous buck-boost converter Wide Input Voltage Range: 2.5-42 V Low Quiescent Current: 20 µA Programmable Switching Frequency: 0.2-2.1 MHz Synchronization with external clock from 200 kHz to 400 kHz Autonomous PFM/PWM3 switching BOM Integration: Built-in switching transistors System Safety Function Support: Undervoltage protection (UVP), overvoltage protection (OVP) Undervoltage locked-out (UVLO), thermal shutdown (TSD) Overcurrent protection (OCP) Voltage supervisor with independent PG4 pins Operating Temperature Range: -40ºC to +125ºC Package: 16-pin Thermally Enhanced TSSOP Qualification: AEC-Q1005 Grade-1 Output Voltage 5.0-5.2 V 1.0 A S6BP201A 2.4 A S6BP202A 3.3 V 2.4 A S6BP203A UVP/OVP Threshold 6 ±4.5% 6 ±4.5%, ±8.0% ±8.0% Block Diagram Battery 2.5-42 V Enable 5.0 V S6BP20xA 5.0-V LDO, Enable Buck-Boost DC/DC Converter 2.1 MHz PFM/PWM3 Switch External Clock for Synchronization 5.0 V or 3.3 V Oscillator, External Sync Frequency Setting Protection Function S6BP201A S6BP202A S6BP203A S6BP201A S6BP202A S6BP203A Easy DesignSim™ Software MPN 5.0-5.2 V Collateral Datasheet: Evaluation Kit: Software: Max. Output Current Power Good4 Function Power Good4 GND Availability Management IC: An IC that converts extremely fluctuating automobile power to safe, Samples: Now Production: Now stable power for ECUs 5 A quality standard defined by the Automotive Electronics Council used to verify the reliability of 2 Advanced Driver Assistance Systems 3 PFM: Pulse-Frequency modulation, PWM: Pulse-Width modulation ICs and qualify them for automotive applications 6 S6BP201A and S6BP202A have factory-selectable options of output voltage, power-on-reset 4 Power Good: An output signal that PMICs provide to signify that the supplied power by time, UVP/OVP threshold, and SYNC Function PMICs is proper and ready 001-90263 Owner: KOKU Automotive Products Roadmap 49 Rev *J BUM: KINA 1 Power Three-Channel Instrument Cluster Automotive PMIC1 Automotive PMIC1 Family | S6BP50x Applications Low-end to mid-range hybrid automotive cluster system Family Table Buck Converter Output Specification Features 3-Channels: Buck controller, boost converter, buck converter Wide Range Input: 2.5-42 V Low Quiescent Current: 15 µA High Switching Frequency: Boost converter and buck converter: 2.1 MHz Built-in SSCG2 Synchronization with external clock from 1.8 to 2.4 MHz System Safety Function Support: Undervoltage protection (UVP), overvoltage protection (OVP) Undervoltage lock-out (UVLO), thermal shutdown (TSD) Overcurrent protection (OCP) Voltage supervisor with independent PG3 pins Temperature supervisor with thermal warning feature Operating Temperature Range: -40ºC to +105ºC Package: 32-pin Thermally Enhanced Side-Wettable4 QFN Qualification: AEC-Q1005 Grade-2 MPN Buck Controller Output Specification Boost Converter Output Specification 1.15 V6, 1.4 A S6BP501A 3.3 V6, 1.6 A 5.0 V6, 1.3 A 1.2 V6, 2.0 A S6BP502A 3.3 V6, 1.9 A 5.0 V6, 1.3 A Block Diagram 2.5-42 V S6BP50x Battery Power Sources Enable SSCG2 External Clock for Synchronization Enable GND 1 5.0 V6 Boost Converter 2.1 MHz Collateral Preliminary Datasheet: S6BP501A S6BP502A Evaluation Kit: User Guide Buck Controller 0.42 MHz 3.3 V6 SSCG2, External Sync Enable, LDO Protection Function Bypass Switch Buck Converter 2.1 MHz Power Good3 and Thermal Warning 1.2 V6 or 1.15 V6 Thermal Warning Power Good3 Availability An IC that converts extremely fluctuating automobile power to safe, stable power for ECUs Samples: Now Production: August 2016 Spread Spectrum Clock Generator 3 Power Good: An output signal that PMICs provide to signify that the supplied power by PMICs 5 A quality standard defined by the Automotive Electronics Council used to verify the reliability of is proper and ready ICs and qualify them for automotive applications 4 A package whose flanks are processed to improve soldering adherence and to simplify the 6 Output voltages are finely adjustable with external resistive dividers optical inspection, which follows soldering 001-90263 Owner: KOKU Automotive Products Roadmap 50 Rev *J BUM: KINA 2 Six-Channel ADAS Automotive PMIC1 Automotive PMIC1 Family | S6BP401A Block Diagram Applications 2.5-42 V Automotive Advanced Driver Assistance Systems (ADAS) Security camera systems S6BP202A Automotive PMIC1 Battery 5.0 V Features 6-Channel PMIC: 4-channel buck converters, 2-channel LDOs Input Voltage Range: 4.5-5.5 V High Switching Frequency: 2.1 MHz Synchronization with external clock from 1.8 to 2.4 MHz BOM Integration: Built-in switching transistors and LDO output transistors Built-in voltage setting resistors and compensation circuitry Built-in discharge resistors System Safety Function Support: Built-in windowed watchdog timer (WDT) Voltage supervisor with independent PG2 pins Independent enable pins Overcurrent protection (OCP), overvoltage protection (OVP) Undervoltage locked-out (UVLO), thermal shutdown (TSD) Operating Temperature Range: -40ºC to +125ºC Package: 40-pin Thermally Enhanced QFN Qualification: AEC-Q1003 Grade-1 S6BP401A Enable for 6 6-Channel 1.8 V External Clock for Synchronization Trigger Input Reset Output (Combined with Power Good2 for LDO1) GND 1.8V LDO, Enable Oscillator, External Sync Windowed Watchdog Timer Power Sources Buck Converter 2.1 MHz (DC/DC 1) 1.200-1.575 V4 2.0 A (MCU Core) Buck Converter 2.1 MHz (DC/DC 2) 1.000-1.275 V4 3.0 A (ISP Core) Buck Converter 2.1 MHz (DC/DC 3) 1.200-2.575 V4 2.0 A (DDR) Buck Converter 2.1 MHz (DC/DC 4) 3.300-3.400 V4 1.0 A (Flash Memory) 3.300-3.400 V4 0.2 A (MCU I/O) LDO 1 1.200-2.875 V4 0.5 A (Camera Module) LDO 2 Protection Function Power Good2 5 Power Good2 for 5-Channel (Except LDO1) Collateral Datasheet: S6BP401A Evaluation Kit: User Guide Availability Samples: Now Production: Now 1 An IC that converts extremely fluctuating automobile power to safe, stable power for ECUs 3 A quality standard defined by the Automotive Electronics Council used to verify the Good: An output signal that PMICs provide to signify that the supplied power by reliability of ICs and qualify them for automotive applications 4 S6BP401A has factory-selectable options of output voltage for each channel PMICs is proper and ready 2 Power 001-90263 Rev *J Owner: KOKU BUM: KINA Automotive Products Roadmap 51 Automotive LED Driver 001-90263 Rev *J Owner: KESE BUM: KINA Automotive Products Roadmap 52 Automotive LED Driver Portfolio Daytime Running Light Clearance Light Turn Light Fog Light Head Light Simple Lighting Mid-Range Matrix LED Headlight1 S6BLXXXA Synchronous Buck2 2 ch3, 1.5 A4, 2.1 MHz5, Boost6, SSCG7, 80 V8, 24-Pin HTSSOP S6BLYYYA Switch2, 4 ch3, 1.5 A4,1 kHz5, 80 V8, 16-Pin HTSSOP Q216 NEW S6BL111A Asynchronous Buck2, 1 ch3, 1.0 A4, 2.1 MHz5, 42 V8, 16-Pin HTSSOP Q216 NEW S6BL111A Asynchronous Buck2, 1 ch3, 1.0 A4, 2.1 MHz5, 42 V8, 16-Pin HTSSOP Q216 NEW S6BL111A Asynchronous Buck2, 1 ch3, 1.0 A4, 2.1 MHz5, 42 V8, 16-Pin HTSSOP Q216 NEW S6BL111A Asynchronous Buck2, 1 ch3, 1.0 A4, 2.1 MHz5, 42 V8, 16-Pin HTSSOP NEW Q216 S6BL111A Asynchronous Buck2, 1 ch3, 1.0 A4, 2.1 MHz5, 42 V8, 16-Pin HTSSOP NEW Q216 S6BL111A Asynchronous Buck2, 1 ch3, 1.0 A4, 2.1 MHz5, 42 V8, 16-Pin HTSSOP NEW Q216 S6BL111A Asynchronous Buck2, 1 ch3, 1.0 A4, 2.1 MHz5, 42 V8, 16-Pin HTSSOP NEW Q216 S6BL111A Asynchronous Buck2, 1 ch3, 1.0 A4, 2.1 MHz5, 42 V8, 16-Pin HTSSOP Q216 NEW S6BL112A Synchronous Buck2 1 ch3, 2.0 A4, 2.1 MHz5, 42 V8, 16-Pin HTSSOP Q216 NEW S6BL111A Asynchronous Buck2, 1 ch3, 1.0 A4, 2.1 MHz5, 42 V8, 16-Pin HTSSOP Market Segment 1 A new head light technology that controls individual LEDs depending on a road, a driving or oncoming vehicles 2 Main topology 3 Output channel 4 Maximum output current 001-90263 Rev *J Owner: KESE BUM: KINA 5 Maximum switching frequency Boost DC/DC converter 7 Spread spectrum clock generator 8 Maximum Input and output voltage Production Sampling Development Concept 6 Automotive Products Roadmap Industrial Automotive Availability QQYY QQYY 53 One-Channel Automotive LED Driver S6BL111A Applications Family Table Daytime running lights, clearance lights, fog lights, turn lights and headlights Maximum Output Current MPN FET ON Resistor Method 1.0 A S6BL111A Hi-Side: 480 mΩ Asynchronous Buck 2.0 A S6BL112A Hi-Side: 200 mΩ Lo-Side: 150 mΩ Synchronous Buck Features Asynchronous rectification buck LED driver High efficiency: >90 % Wide input voltage range: 4.5-42 V Maximum output current: 1 A High accuracy output current: ±2.0 % Adjustable switching frequency: 0.205-2.1 MHz Minimum on time1: 35 ns System safety functions for system protection Dimming function: Analog2, PWM3 Slew rate control4 for noise reduction Package: 16-pin thermally enhanced TSSOP (4.4 mm x 5.0 mm) Qualification: AEC-Q100 Grade-1 Block Diagram VBAT VIN MASK6 S6BL111A BGR5 4.2-V LDO MASK6 Oscillator VCC RT PVIN UVLO7 UVLO7 DIM SRCNT BST Collateral Preliminary Datasheet: S6BL111A Automotive LED Driver Evaluation Kit: ADJ Contact Sales DIAG Availability Sampling: Now spec of switching on time of power MOSFET used in the LED driver method to control the brightness of an LED using varying DC current 3 A method to control the brightness of an LED using a pulse width modulated signal generated by a microcontroller 2A Owner: KESE BUM: KINA 4A function that reduces switching noise by controlling the rise time (Tr) and fall time (Tf) of the internal switching power MOSFET 5 Band gap reference Automotive Products Roadmap PWM Control LX PGND CSP Protection Function Production: Q2 2016 1A 001-90263 Rev *J VCC LED Current Control CSN LED 6 Prevents a false LED open detection when a drop in the input voltage causes the output voltage to fall below the forward voltage of the LED devices 7 Undervoltage lockout 54 One-Channel Automotive LED Driver S6BL112A Applications Family Table Headlights, daytime running lights, clearance lights, fog lights and turn lights Maximum Output Current MPN FET ON Resistor Method 1.0 A S6BL111A Hi-Side: 480 mΩ Asynchronous Buck S6BL112A Hi-Side: 200 mΩ Lo-Side: 150 mΩ Synchronous Buck 2.0 A Features Synchronous rectification buck LED driver High efficiency: >90 % Wide input voltage range: 4.5-42 V Maximum output current: 2 A High accuracy output current: ±2.0 % Adjustable switching frequency: 0.205-2.1 MHz Minimum on time1: 35 ns System safety functions for system protection Dimming function: Analog2, PWM3 Slew rate control4 for noise reduction Package: 16-pin thermally enhanced TSSOP (4.4 mm x 5.0 mm) Qualification: AEC-Q100 Grade-1 Block Diagram Preliminary Datasheet: Contact Sales Automotive LED Driver Evaluation Kit: Contact Sales UCD Availability DIAG 1 Production: Q3 2016 A spec of switching on time of power MOSFET used in the LED driver A method to control the brightness of an LED using varying DC current 3 A method to control the brightness of an LED using a pulse width modulated signal generated by a microcontroller 2 Owner: KESE BUM: KINA 4 BGR6 4.2-V LDO MASK6 Oscillator VCC RT DIM SRCNT BST UVLO7 Under Current Detection Protection Function A function that reduces switching noise by controlling the rise time (Tr) and fall time (Tf) of the internal switching power MOSFET 5 Band gap reference Automotive Products Roadmap VCC PVIN LED Current Control ADJ VCC Sampling: Q2 2016 S6BL112A MASK6 Collateral 001-90263 Rev *J VIN VBAT PWM Control LX PGND CSP CSN LED 6 Prevents a false LED open detection when a drop in the input voltage causes the output voltage to fall below the forward voltage of the LED devices 7 Undervoltage lockout 55