ESIGNS NEW D R O F PART ED E ME N T MMEND C O A C L E P R D RE N OT MENDE L8393 RECOMData Sheet IS March 13, 2006 • Drop-in Replacement for MAX394 The Intersil ISL8394 device is a precision, quad SPDT analog switches designed to operate from a single +2V to +12V supply or from a 2V to 6V supply. Targeted applications include battery powered equipment that benefit from the devices’ low power consumption (5W), low leakage currents (2.5nA max), and fast switching speeds (tON = 50ns, tOFF = 30ns). A 4maximum RON flatness ensures signal fidelity, while channel to channel mismatch is guaranteed to be less than 2. The ISL8394 is a quad single-pole/double-throw (SPDT) device and can be used as a quad SPDT, a quad 2:1 multiplexer, a single 4:1 multiplexer, or a dual 2-channel differential multiplexer. Table 1 summarizes the performance of this family. For higher performance, pin compatible versions, see the ISL43240 data sheet. TABLE 1. FEATURES AT A GLANCE 5V RON 17 5V tON/tOFF 50ns/30ns 5V RON 25 5V tON/tOFF 80ns/40ns 3V RON 75 3V tON/tOFF 150ns/75ns Package 20 Ld SOIC PART MARKING TEMP. RANGE (°C) PACKAGE • ON Resistance (RON) . . . . . . . . . . . 17Typ) 35Max) • RON Matching Between Channels. . . . . . . . . . . . . . . . . . <1 • Low Charge Injection . . . . . . . . . . . . . . . . . . . . . 10pC (Max) • Low Power Consumption (PD) . . . . . . . . . . . . . . . . . . . .<5W • Low Leakage Current (Max at 85°C) . . . . . . . . . . . . 2.5nA • Fast Switching Action - tON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50ns - tOFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30ns • Guaranteed Break-Before-Make • Minimum 2000V ESD Protection per Method 3015.7 • TTL, CMOS Compatible • Pb-Free Plus Anneal Available (RoHS Compliant) • Battery Powered, Handheld, and Portable Equipment - Barcode Scanners - Laptops, Notebooks, Palmtops • Communications Systems - Radios - Base Stations - RF “Tee” Switches • Test Equipment - Ultrasound - CAT/PET SCAN - Electrocardiograph Ordering Information PART NUMBER • Four Separately Controlled SPDT Switches Applications ISL8394 Quad SPDT FN6038.3 Features Low-Voltage, Single and Dual Supply, Quad SPDT, Analog Switches Configuration ISL8394 PKG. DWG. # ISL8394IB ISL8394IB -40 to 85 20 Ld SOIC M20.3 ISL8394IBZ (See Note) ISL8394IBZ -40 to 85 20 Ld SOIC (Pb-free) M20.3 *Add “-T” suffix for tape and reel. NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. • Audio and Video Switching • General Purpose Circuits - +3V/+5V DACs and ADCs - Digital Filters - Operational Amplifier Gain Switching Networks - High Frequency Analog Switching - High Speed Multiplexing Related Literature • Technical Brief TB363 “Guidelines for Handling and Processing Moisture Sensitive Surface Mount Devices (SMDs)” • Application Note AN557 “Recommended Test Procedures for Analog Switches” 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2003, 2004, 2006. All Rights Reserved. All other trademarks mentioned are the property of their respective owners. ISL8394 Pinout Pin Descriptions (Note 1) ISL8394 (SOIC) TOP VIEW IN1 1 20 IN4 NO1 2 19 NO4 COM1 3 PIN 18 COM4 NC1 4 17 NC4 V- 5 16 V+ FUNCTION V+ Positive Power Supply Input V- Negative Power Supply Input. Connect to GND for Single Supply Configurations. GND Ground Connection IN Digital Control Input GND 6 15 N.C. COM NC2 7 14 NC3 NO Analog Switch Normally Open Pin NC Analog Switch Normally Closed Pin N.C. No Internal Connection COM2 8 13 COM3 NO2 9 12 NO3 IN2 10 11 IN3 Analog Switch Common Pin NOTE: 1. Switches Shown for Logic “0” Input. Truth Table LOGIC ISL8394 NO SW ISL8394 NC SW 0 OFF ON 1 ON OFF NOTE: Logic “0” 0.8V. Logic “1” 2.4V. 2 FN6038.3 March 13, 2006 ISL8394 Absolute Maximum Ratings Thermal Information V+ to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to15V V+ to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to15V V- to GND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -15 to 0.3V All Other Pins (Note 2) . . . . . . . . . . . . . ((V-) - 0.3V) to ((V+) + 0.3V) Continuous Current (Any Terminal) . . . . . . . . . . . . . . . . . . . . . 30mA Peak Current, IN, NO, NC, or COM (Pulsed 1ms, 10% Duty Cycle, Max) . . . . . . . . . . . . . . . . . 100mA ESD Rating (Per MIL-STD-883 Method 3015). . . . . . . . . . . . . .>2kV Thermal Resistance (Typical, Note 3) JA (°C/W) 20 Ld SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . 95 Maximum Junction Temperature (Plastic Package). . . . . . . . 150°C Moisture Sensitivity (See Technical Brief TB363) SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Level 1 Maximum Storage Temperature Range . . . . . . . . . . . . . -65°C to 150°C Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300°C (Lead Tips Only) Operating Conditions Temperature Range ISL8394IX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to 85°C CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTES: 2. Signals on NC, NO, COM, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to maximum current ratings. 3. JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details. Electrical Specifications: 5V Supply Test Conditions: VSUPPLY = 4.5V to 5.5V, GND = 0V, VINH = 2.4V, VINL = 0.8V (Note 4), Unless Otherwise Specified TEMP (°C) (NOTE 5) MIN TYP Full V- - V+ V 25 - 17 35 Full - - 45 25 - 0.5 2 Full - - 4 25 - - 4 Full - - 6 25 -0.2 - 0.2 nA Full -2.5 - 2.5 nA 25 -0.4 - 0.4 nA Full -5 - 5 nA Input Voltage High, VINH Full 2.4 - - V Input Voltage Low, VINL Full - - 0.8 V VS = 5.5V, VIN = 0V or V+ Full -1 1 A VS = 4.5V, VNO or VNC = 3V, RL = 300, CL = 35pF, VIN = 0 to 3V, (See Figure 1) 25 - 50 130 ns Full - - 175 ns 25 - 30 75 ns Full - - 100 ns PARAMETER TEST CONDITIONS (NOTE 5) MAX UNITS ANALOG SWITCH CHARACTERISTICS Analog Signal Range, VANALOG VS = 4.5V, ICOM = 10mA, VNO or VNC = 3.5V, (See Figure 5) ON Resistance, RON RON Matching Between Channels, RON VS = 5V, ICOM = 10mA, VNO or VNC = 3V RON Flatness, RFLAT(ON) VS = 5V, ICOM = 10mA, VNO or VNC = 3V, 0V, (Note 7) NO or NC OFF Leakage Current, INO(OFF) or INC(OFF) VS = 5.5V, VCOM = 4.5V, VNO or VNC = +4.5V, (Note 6) COM ON Leakage Current, ICOM(ON) VS = 5.5V, VCOM = VNO or VNC = 4.5V, (Note 6) DIGITAL INPUT CHARACTERISTICS Input Current, IINH, IINL DYNAMIC CHARACTERISTICS Turn-ON Time, tON VS = 4.5V, VNO or VNC = 3V, RL = 300, CL = 35pF, VIN = 0 to 3V, (See Figure 1) Turn-OFF Time, tOFF Break-Before-Make Time Delay, tD VS = 5.5V, VNO or VNC = 3V, RL = 300, CL = 35pF, VIN = 0 to 3V, (See Figure 3) 25 2 10 - ns Charge Injection, Q CL = 1.0nF, VG = 0V, RG = 0, (See Figure 2) 25 - 5 10 pC NO OFF Capacitance, COFF f = 1MHz, VNO or VNC = VCOM = 0V, (See Figure 7) 25 - 12 - pF 3 FN6038.3 March 13, 2006 ISL8394 Electrical Specifications: 5V Supply Test Conditions: VSUPPLY = 4.5V to 5.5V, GND = 0V, VINH = 2.4V, VINL = 0.8V (Note 4), Unless Otherwise Specified (Continued) PARAMETER TEST CONDITIONS TEMP (°C) (NOTE 5) MIN TYP (NOTE 5) MAX UNITS NC OFF Capacitance, COFF f = 1MHz, VNO or VNC = VCOM = 0V, (See Figure 7) 25 - 12 - pF COM ON Capacitance, CCOM(ON) f = 1MHz, VNO or VNC = VCOM = 0V, (See Figure 7) 25 - 39 - pF OFF Isolation RL = 50, CL = 15pF, f = 1MHz, VNO or VNC = 1VRMS, (See Figures 4 and 6) 25 - 71 - dB 25 - -92 - dB Full 2.0 - 6 V 25 -1 0.01 1 A Full -1 - 1 A 25 -1 0.01 1 A Full -1 - 1 A Crosstalk, (Note 8) POWER SUPPLY CHARACTERISTICS Power Supply Range VS = 5.5V, VIN = 0V or V+, Switch On or Off Positive Supply Current, I+ Negative Supply Current, I- NOTES: 4. VIN = Input voltage to perform proper function. 5. The algebraic convention, whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. 6. Leakage parameter is 100% tested at high temp, and guaranteed by correlation at 25°C. 7. Flatness is defined as the difference between maximum and minimum value of on-resistance over the specified analog signal range. Flatness specifications are guaranteed only with specified voltages. 8. Between any two switches. Electrical Specifications: 5V Supply Test Conditions: V+ = +4.5V to +5.5V, V- = GND = 0V, VINH = 2.4V, VINL = 0.8V (Note 4), Unless Otherwise Specified TEMP (°C) MIN (NOTE 5) TYP Full 0 - V+ V 25 - 25 65 Full - - 75 25 - 0.5 2 Full - - 4 25 - - 6 Full - - 8 25 -0.2 - 0.2 nA Full -2.5 - 2.5 nA 25 -0.4 - 0.4 nA Full -5 - 5 nA Input Voltage High, VINH Full 2.4 - - V Input Voltage Low, VINL Full - - 0.8 V V+ = 5.5V, VIN = 0V or V+ Full -1 - 1 A V+ = 4.5V, VNO or VNC = 3V, RL = 300, CL = 35pF, VIN = 0 to 3V, (See Figure 1) 25 - 80 250 ns Full - - 300 ns PARAMETER TEST CONDITIONS MAX (NOTE 5) UNITS ANALOG SWITCH CHARACTERISTICS Analog Signal Range, VANALOG ON Resistance, RON V+ = 5V, ICOM = 1.0mA, VNO or VNC = 3.5V, (See Figure 5) RON Matching Between Channels, RON V+ = 5V, ICOM = 1.0mA, VNO or VNC = 3V RON Flatness, RFLAT(ON) V+ = 5V, ICOM = 1.0mA, VNO or VNC = 1V, 2V, 3V, (Note 7) NO or NC OFF Leakage Current, INO(OFF) or INC(OFF) V+ = 5.5V, VCOM = 1V, 4.5V, VNO or VNC = 4.5V, 1V, (Note 6) COM ON Leakage Current, ICOM(ON) V+ = 5.5V, VCOM = VNO or VNC = 4.5V, (Note 6) DIGITAL INPUT CHARACTERISTICS Input Current, IINH, IINL DYNAMIC CHARACTERISTICS Turn-ON Time, tON 4 FN6038.3 March 13, 2006 ISL8394 Electrical Specifications: 5V Supply PARAMETER Test Conditions: V+ = +4.5V to +5.5V, V- = GND = 0V, VINH = 2.4V, VINL = 0.8V (Note 4), Unless Otherwise Specified (Continued) TEST CONDITIONS Turn-OFF Time, tOFF V+ = 4.5V, VNO or VNC = 3V, RL = 300, CL = 35pF, VIN = 0 to 3V, (See Figure 1) TEMP (°C) MIN (NOTE 5) TYP MAX (NOTE 5) UNITS 25 - 40 125 ns Full - - 175 ns Break-Before-Make Time Delay, tD V+ = 5.5V, VNO or VNC = 3V, RL = 300, CL = 35pF, VIN = 0 to 3V, (See Figure 3) 25 5 20 - ns Charge Injection, Q CL = 1.0nF, VG = 0V, RG = 0See Figure 2) 25 - 3 5 pC Full 2 - 12 V 25 -1 0.01 1 A Full -1 - 1 A 25 -1 0.01 1 A Full -1 - 1 A POWER SUPPLY CHARACTERISTICS Power Supply Range Positive Supply Current, I+ V+ = 5.5V, V- = 0V, VIN = 0V or V+, Switch On or Off Negative Supply Current, I- Electrical Specifications: 3.3V Supply Test Conditions: V+ = +3.0V to +3.6V, V- = GND = 0V, VINH = 2.4V, VINL = 0.8V (Note 4), Unless Otherwise Specified TEMP (°C) MIN (NOTE 5) TYP Full 0 - V+ V 25 - 75 185 Full - - 250 25 -0.2 - 0.2 nA Full -2.5 - 2.5 nA 25 -0.4 - 0.4 nA Full -5 - 5 nA Input Voltage High, VINH Full 2.4 - - V Input Voltage Low, VINL Full - - 0.8 V V+ = 3.6V, VIN = 0V or V+ Full -1 - 1 A Turn-ON Time, tON V+ = 3.0V, VNO or VNC = 1.5V, RL = 300, CL = 35pF, VIN = 0 to 3V, (See Figure 1) 25 - 150 400 ns Turn-OFF Time, tOFF V+ = 3.0V, VNO or VNC = 1.5V, RL = 300, CL = 35pF, VIN = 0 to 3V, (See Figure 1) 25 - 75 150 ns Break-Before-Make Time Delay, tD V+ = 3.6V, VNO or VNC = 1.5V, RL = 300, CL = 35pF, VIN = 0 to 3V, (See Figure 3) 25 5 20 - ns Charge Injection, Q CL = 1.0nF, VG = 0V, RG = 0See Figure 2) 25 - 1 5 pC Full 2 - 12 V 25 -1 0.01 1 A Full -1 - 1 A 25 -1 0.01 1 A Full -1 - 1 A PARAMETER TEST CONDITIONS MAX (NOTE 5) UNITS ANALOG SWITCH CHARACTERISTICS Analog Signal Range, VANALOG ON Resistance, RON V+ = 3V, ICOM = 1.0mA, VNO or VNC = 1.5V NO or NC OFF Leakage Current, INO(OFF) or INC(OFF) V+ = 3.6V, VCOM = 0V, 4.5V, VNO or VNC = 3V, 1V, (Note 6) COM ON Leakage Current, ICOM(ON) V+ = 3.6V, VCOM = VNO or VNC = 3V, (Note 6) DIGITAL INPUT CHARACTERISTICS Input Current, IINH, IINL DYNAMIC CHARACTERISTICS POWER SUPPLY CHARACTERISTICS Power Supply Range Positive Supply Current, I+ V+ = 3.6V, V- = 0V, VIN = 0V or V+, Switch On or Off Negative Supply Current, I- 5 FN6038.3 March 13, 2006 ISL8394 Test Circuits and Waveforms V+ tr < 20ns tf < 20ns 3V LOGIC INPUT 50% tON NC SWITCH INPUTS VOUT VNO 75% VNC IN 75% tOFF LOGIC INPUT tOFF CL 35pF RL 300 GND 25% 25% VOUT COM NO VNO SWITCH OUTPUT C VNC 0V tON C C C V- Logic input waveform is inverted for switches that have the opposite logic sense. Repeat test for all switches. CL includes fixture and stray capacitance. RL -----------------------------V OUT = V (NO or NC) R + R FIGURE 1A. MEASUREMENT POINTS FIGURE 1B. TEST CIRCUIT L ON FIGURE 1. SWITCHING TIMES V+ SWITCH OUTPUT VOUT C VOUT RG COM VOUT NO OR NC 3V ON ON LOGIC INPUT OFF 0V VG Q = VOUT x CL C Logic input waveform is inverted for switches that have the opposite logic sense. FIGURE 2A. MEASUREMENT POINTS GND IN V- CL LOGIC INPUT Repeat test for all switches. CL includes fixture and stray capacitance. FIGURE 2B. TEST CIRCUIT FIGURE 2. CHARGE INJECTION V+ 3V LOGIC INPUT C 0V VNX SWITCH OUTPUT VOUT C NO 80% tD LOGIC INPUT CL 35pF RL 300 IN 0V VOUT COM NC GND Repeat test for all switches. CL includes fixture and stray capacitance. FIGURE 3A. MEASUREMENT POINTS FIGURE 3B. TEST CIRCUIT FIGURE 3. BREAK-BEFORE-MAKE TIME 6 FN6038.3 March 13, 2006 ISL8394 Test Circuits and Waveforms (Continued) V+ V+ C C RON = V1/1mA SIGNAL GENERATOR NO OR NC NO OR NC VNX 0V OR 2.4V IN 1mA COM ANALYZER 0.8V OR 2.4V IN V1 COM GND GND RL C V- C V- Repeat test for all switches. Repeat test for all switches. FIGURE 5. RON TEST CIRCUIT FIGURE 4. OFF ISOLATION TEST CIRCUIT V+ V+ C SIGNAL GENERATOR NO1 OR NC1 50 COM1 NO OR NC IN1 IN 0V or 2.4V IN2 0V OR 2.4V COM2 ANALYZER NO CONNECTION NO2 or NC2 GND 0V OR 2.4V IMPEDANCE ANALYZER COM GND RL V- C FIGURE 6. CROSSTALK TEST CIRCUIT Detailed Description The ISL8394 quad analog switches offer precise switching capability from a bipolar 2V to 6V or a single 2V to 12V supply with low on-resistance (17) and high speed operation (tON = 50ns, tOFF = 30ns). The devices are especially well suited to portable battery powered equipment thanks to the low operating supply voltage (2V), low power consumption (5W), low leakage currents (2.5nA max). High frequency applications also benefit from the wide bandwidth, and the very high off isolation and crosstalk rejection. Supply Sequencing And Overvoltage Protection With any CMOS device, proper power supply sequencing is required to protect the device from excessive input currents which might permanently damage the IC. All I/O pins contain ESD protection diodes from the pin to V+ and to V- (see 7 V- FIGURE 7. CAPACITANCE TEST CIRCUIT Figure 8). To prevent forward biasing these diodes, V+ and V- must be applied before any input signals, and input signal voltages must remain between V+ and V-. If these conditions cannot be guaranteed, then one of the following two protection methods should be employed. Logic inputs can easily be protected by adding a 1k resistor in series with the input (see Figure 8). The resistor limits the input current below the threshold that produces permanent damage, and the sub-microamp input current produces an insignificant voltage drop during normal operation. Adding a series resistor to the switch input defeats the purpose of using a low RON switch, so two small signal diodes can be added in series with the supply pins to provide overvoltage protection for all pins (see Figure 8). These additional diodes limit the analog signal from 1V below V+ to FN6038.3 March 13, 2006 ISL8394 1V above V-. The low leakage current performance is unaffected by this approach, but the switch resistance may increase, especially at low supply voltages. OPTIONAL PROTECTION DIODE V+ OPTIONAL PROTECTION RESISTOR INX VNO or NC VCOM VOPTIONAL PROTECTION DIODE FIGURE 8. OVERVOLTAGE PROTECTION High-Frequency Performance In 5systems, signal response is reasonably flat even past 200MHz (see Figure 15), with a small signal -3dB bandwidth in excess of 300MHz, and a large signal bandwidth exceeding 300MHz. An off switch acts like a capacitor and passes higher frequencies with less attenuation, resulting in signal feedthrough from a switch’s input to its output. Off Isolation is the resistance to this feedthrough, while Crosstalk indicates the amount of feedthrough from one switch to another. Figure 16 details the high Off Isolation and Crosstalk rejection provided by this switch. At 10MHz, off isolation is about 50dB in 5systems, decreasing approximately 20dB per decade as frequency increases. Higher load impedances decrease Off Isolation and Crosstalk rejection due to the voltage divider action of the switch OFF impedance and the load impedance. Leakage Considerations Power-Supply Considerations The ISL8394 construction is typical of most CMOS analog switches, in that they have three supply pins: V+, V-, and GND. V+ and V- drive the internal CMOS switches and set their analog voltage limits, so there are no connections between the analog signal path and GND. Unlike switches with a 13V maximum supply voltage, the ISL8394 15V maximum supply voltage provides plenty of room for the 10% tolerance of 12V supplies (6V or 12V single supply), as well as room for overshoot and noise spikes. This family of switches performs equally well when operated with bipolar or single voltage supplies.The minimum recommended supply voltage is 2V or 2V. It is important to note that the input signal range, switching times, and onresistance degrade at lower supply voltages. Refer to the electrical specification tables and Typical Performance curves for details. Reverse ESD protection diodes are internally connected between each analog-signal pin and both V+ and V-. One of these diodes conducts if any analog signal exceeds V+ or V-. Virtually all the analog leakage current comes from the ESD diodes to V+ or V-. Although the ESD diodes on a given signal pin are identical and therefore fairly well balanced, they are reverse biased differently. Each is biased by either V+ or V- and the analog signal. This means their leakages will vary as the signal varies. The difference in the two diode leakages to the V+ and V- pins constitutes the analog-signalpath leakage current. All analog leakage current flows between each pin and one of the supply terminals, not to the other switch terminal. This is why both sides of a given switch can show leakage currents of the same or opposite polarity. There is no connection between the analog signal paths and GND. V+ and GND power the internal logic (thus setting the digital switching point) and level shifters. The level shifters convert the logic levels to switched V+ and V- signals to drive the analog switch gate terminals. Logic-Level Thresholds V+ and GND power the internal logic stages, so V- has no affect on logic thresholds. This switch family is TTL compatible (0.8V and 2.4V) over a V+ supply range of 2.7V to 10V. At 12V the VIH level is about 2.5V. This is still below the TTL guaranteed high output minimum level of 2.8V, but noise margin is reduced. For best results with a 12V supply, use a logic family that provides a VOH greater than 3V. The digital input stages draw supply current whenever the digital input voltage is not at one of the supply rails. Driving the digital input signals from GND to V+ with a fast transition time minimizes power dissipation. 8 FN6038.3 March 13, 2006 ISL8394 Typical Performance Curves TA = 25°C, Unless Otherwise Specified 25 20 15 60 85°C 50 25°C 40 RON () V- = 0V 85°C 37.5 25°C -40°C 4 5 6 7 8 V+ (V) 9 10 11 12 45 85°C 40 V+ = 3.3V -40°C V- = 0V V- = 0V V+ = 5V 85°C 25°C 25°C -40°C 0 1 2 3 4 5 FIGURE 10. ON RESISTANCE vs SWITCH VOLTAGE VS =2V ICOM = 1mA 15 85°C 35 25°C 30 25 10 -40°C 20 35 VS =3V 30 85°C 25 5 V+ = 3.3V 25°C 20 Q (pC) RON () 50 VCOM (V) FIGURE 9. ON RESISTANCE vs SUPPLY VOLTAGE 40 V+ = 2.7V V- = 0V 20 60 20 35 30 25 20 15 12.5 3 25°C -40°C 30 25 0 85°C 30 62.5 50 ICOM = 1mA 70 -40°C 10 RON () 80 VCOM = (V+) - 1V ICOM = 1mA V- = -5V -40°C 15 10 25 0 V+ = 5V 20 25°C VS =5V 85°C VS =5V -5 15 -40°C 10 -10 5 -5 -4 -3 -2 -1 0 1 2 3 4 VCOM (V) FIGURE 11. ON RESISTANCE vs SWITCH VOLTAGE 9 5 -5 -2.5 0 VCOM (V) 2.5 5 FIGURE 12. CHARGE INJECTION vs SWITCH VOLTAGE FN6038.3 March 13, 2006 ISL8394 Typical Performance Curves TA = 25°C, Unless Otherwise Specified (Continued) 250 150 100 tOFF (ns) tON (ns) 0 300 V- = 0V 250 85°C 25°C 150 0 3 0 50 V- = 0V 40 85°C 25°C 20 -40°C 2 -40°C 30 100 50 85°C 25 -40°C 200 25°C 50 85°C 50 -40°C 75 25°C 4 5 6 7 8 9 10 11 10 12 -40°C 2 3 4 5 6 V+ (V) 8 9 10 11 -10 VS = 5V GAIN 0 VIN = 5VP-P PHASE VIN = 5VP-P 0 45 90 135 180 RL = 50 10 100 FREQUENCY (MHz) FIGURE 15. FREQUENCY RESPONSE 600 CROSSTALK (dB) -3 VIN = 0.2VP-P 10 V+ = 3V to 12V or -20 VS = 2V to 5V RL = 50 -30 VIN = 0.2VP-P 3 12 FIGURE 14. TURN - OFF TIME vs SUPPLY VOLTAGE PHASE (DEGREES) NORMALIZED GAIN (dB) 7 V+ (V) FIGURE 13. TURN - ON TIME vs SUPPLY VOLTAGE 1 VCOM = (V+) - 1V V- = -5V 25°C 100 25°C 20 30 -40 40 -50 50 -60 60 ISOLATION -70 70 -80 80 OFF ISOLATION (dB) 200 125 VCOM = (V+) - 1V V- = -5V -40°C CROSSTALK -90 90 -100 100 -110 1k 10k 100k 1M 10M 110 100M 500M FREQUENCY (Hz) FIGURE 16. CROSSTALK AND OFF ISOLATION Die Characteristics SUBSTRATE POTENTIAL (POWERED UP): VTRANSISTOR COUNT: ISL8394: 418 PROCESS: Si Gate CMOS 10 FN6038.3 March 13, 2006 ISL8394 Small Outline Plastic Packages (SOIC) M20.3 (JEDEC MS-013-AC ISSUE C) 20 LEAD WIDE BODY SMALL OUTLINE PLASTIC PACKAGE N INDEX AREA H 0.25(0.010) M B M INCHES E -B- 1 2 3 L SEATING PLANE -A- A D h x 45° -C- e A1 B C 0.10(0.004) 0.25(0.010) M C A M SYMBOL MIN MAX MIN MAX NOTES A 0.0926 0.1043 2.35 2.65 - A1 0.0040 0.0118 0.10 0.30 - B 0.014 0.019 0.35 0.49 9 C 0.0091 0.0125 0.23 0.32 - D 0.4961 0.5118 12.60 13.00 3 E 0.2914 0.2992 7.40 7.60 4 e B S 0.050 BSC 1.27 BSC - H 0.394 0.419 10.00 10.65 - h 0.010 0.029 0.25 0.75 5 L 0.016 0.050 0.40 1.27 6 N NOTES: MILLIMETERS 20 0° 20 8° 0° 7 8° 1. Symbols are defined in the “MO Series Symbol List” in Section 2.2 of Publication Number 95. Rev. 2 6/05 2. Dimensioning and tolerancing per ANSI Y14.5M-1982. 3. Dimension “D” does not include mold flash, protrusions or gate burrs. Mold flash, protrusion and gate burrs shall not exceed 0.15mm (0.006 inch) per side. 4. Dimension “E” does not include interlead flash or protrusions. Interlead flash and protrusions shall not exceed 0.25mm (0.010 inch) per side. 5. The chamfer on the body is optional. If it is not present, a visual index feature must be located within the crosshatched area. 6. “L” is the length of terminal for soldering to a substrate. 7. “N” is the number of terminal positions. 8. Terminal numbers are shown for reference only. 9. The lead width “B”, as measured 0.36mm (0.014 inch) or greater above the seating plane, shall not exceed a maximum value of 0.61mm (0.024 inch) 10. Controlling dimension: MILLIMETER. Converted inch dimensions are not necessarily exact. All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9001 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 11 FN6038.3 March 13, 2006