LCA.... www.vishay.com Vishay Draloric Standard Carbon Film Leaded Resistors FEATURES • Securely bonded carbon film • Good moisture resistance (Rmax. ± 1.5 % R) • Good long term stability (Rmax. ± 1.5 % R, for 1000 h) • Low noise (refer to graph) • Suitable for general purpose commercial electronics and pulse load applications • Lead (Pb)-free solder contacts • Pure tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE POWER RATING P70 W LIMITING ELEMENT VOLTAGE Umax. V LCA0207 0207 0.35 300 LCA0414 0414 0.6 500 TOLERANCE ±% RESISTANCE RANGE 2 1 to 1M 5 0.22 to 5.1M 2 1 to 1M 5 0.22 to 10M E-SERIES E24 E24 Notes • Coating: Light blue. • Marking: Color coded. Additional blue color marking after second band. TECHNICAL SPECIFICATIONS PARAMETER UNIT LCA0207 Rated dissipation, P70 W 0.35 0.6 Limiting element voltage, Umax. (1) V 300 500 Limiting voltage, short-time V 500 1000 Insulation voltage, Uins (1 min) V > 700 > 700 K/W 220 Thermal resistance Insulation resistance Category temperature range Weight Note (1) Rated voltage 140 1011 °C - 55 to + 155 10-9/h Failure rate LCA0414 g < 10 0.21 0.68 P x R. Revision: 05-Jun-13 Document Number: 20135 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LCA.... www.vishay.com Vishay Draloric PART NUMBER AND PRODUCT DESCRIPTION Part Number: LCA0207002401J2500 L C A 0 2 0 7 0 0 2 4 0 1 J 2 5 0 0 MODEL/SIZE VARIANT TCR VALUE TOLERANCE PACKAGING (1) SPECIAL LCA0207 LCA0414 0 = Neutral 0 = Neutral See diagram 3 digit value 1 digit multiplier Multiplier 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 5 = *105 6 = *106 G=±2% J=±5% 25 = A5 22 = A2 (G53) 21 = A1 D5 = R5 D2 = R2 Up to 2 digits 00 = Standard Product Description: LCA0207 2K4 5 % A5 LCA0207 2K4 5% A5 MODEL RESISTANCE VALUE TOLERANCE PACKAGING (1) LCA0207 LCA0414 220K = 220 k 10R = 10 ±2% ±5% A5, R5 A1, R2 A2 Notes • The PART NUMBER shown above is to facilitate the unified part numbering system for ordering products. (1) Please refer to table PACKAGING. PACKAGING REEL MODEL BOX PIECES/REEL CODE MIN. ORDER QTY PACKAGING UNITS LCA0207 5000 R5 1 LCA0414 2000 R2 1 PIECES/BOX CODE 5000 A5 2000 A2 1000 A1 MIN. ORDER QTY PACKAGING UNITS 1 1 DIMENSIONS in millimeters 6 mm L1 L D d e B MODEL Dmax. L L1 B d e LCA0207 2.4 - 0.3 6.1 - 0.5 8.1 53 ± 1 0.6 7.5 LCA0414 4.2 - 0.5 12.2 - 0.7 14.2 53 ± 1 0.8 15.0 Notes • Taping in according with IEC 60286-1. • D and L measured in according with IEC 60294. • d according to IEC 60301. Revision: 05-Jun-13 Document Number: 20135 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LCA.... www.vishay.com Vishay Draloric TEMPERATURE RISE IN °C % RATED POWER 120 100 80 60 40 100 90 0414 0207 80 70 60 50 40 30 20 20 10 0 - 55 - 25 0 25 50 75 70 100 125 150 175 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 POWER IN W OI CURRENT URRENT N NOISE (µV/V) NON-LINEARITY A3 in dB 0.1 TEMPERATURE RISE 120 110 0414 0207 100 90 80 5 3 2 1 0.5 60 1K 10K 100K NON-LINEARITY 1M 10M RESISTANCE VALUE [Ω] - 200 - 400 - 600 0414 - 800 0207 - 1000 1K 10K 100K CURRENT NOISE RESISTANCE CHANGE Δ R /R [%] 0 0207 0414 0.3 0.2 0.1 0.05 0.03 0.02 0.01 70 100 0 AMBIENT TEMP. IN °C DERATING TEMPERATURE COEFFICIENT [10-6/°C] 0 200 1M 10M RESISTANCE VALUE [Ω] 3 2 1 0 -1 -2 - 1200 10 100 1K 10K 100K 1M 10M 100 1K 10K 100K 1M 10M RESISTANCE VALUE [Ω] TEMPERATURE COEFFICIENT ENDURANCE (mean value) between - 25 °C to + 125 °C deviation ± 25 % at upper category temperature, 155 °C 1000 h Revision: 05-Jun-13 Document Number: 20135 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LCA.... www.vishay.com Vishay Draloric STABILITY NOMOGRAM, TYPICAL VALUES (For handling see General Information) 140 0414 TEMPERATURE RISE ϑü [C] 140 120 0207 100 80 60 40 ϑ ü = f [P ] PARAMETER: SIZE 2.2 2.0 1.8 1.6 20 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 0.1 h 0.5 0 10 00 h 1 00 h 00 h 50 00 20 5 POWER RATING P [W] 1 0.3 10 0.1 1000 100 1 041 4 020 7 10-4 10-3 PULSE RATING P 10-2 2000 °C 40 60 °C C ° 80 60 C 0° 40 10 20 12 C 0° C 0° 14 40 60 100 80 120 140 160 180 FILM TEMPERATURE ϑs [°C] 0.1 100 R10K 1K 100 K 1M 0.5 1 Δ R/R [t = 1000 h] = f [ϑs] PARAMETER: RESISTANCE VALUE 5 10 20 40 80 100 120 140 160 180 FILM TEMPERATURE ϑs [°C] 60 1000 100 041 4 10 020 7 Secondary conditions: a) P ≤ P70 (permissible constant power at ϑu = 70 °C) b) ϑu ≤ 70 °C c) R ≥ 10 Ω d) Û max. see diagram below 0.1 -5 10 10 10-1 100 SQUARE PULSE t i (s) 10-4 10-3 10-2 PULSE RATING P ≤ P 70 IMPEDANCE 0 ϑ 2 u= 80 1 Secondary conditions: a) P ϑ b) ϑu ≤ 70 °C c) R ≥ 10 Ω d) Û max. see diagram below 0.1 10-5 PULSE VOLTAGE ÜMAX. [V] h 10 100 10 3 30 RESISTANCE CHANGE Δ R /R [%] 10 RESISTANCE CHANGE Δ R /R [%] after 1000 h 10 100 20 POWER RATING P [W] 0 t= 0 00 0° ϑ ü = f [ϑs] PARAMETER: ϑu 0 LOAD P [W] Δ R /R (t) = f [Δ R/R (t = 1000 h)] PARAMETER: TIME C 120 10-1 100 10 SQUARE PULSE t i (s) 10K 10K 1K 0414 1K 100 Ω 0207 1000 100 Secondary conditions: a) P max. see diagram below b) ϑu ≤ 70 °C 0 10 -5 10 -4 10 Ω -3 10 10 -2 MAXIMUM PULSE VOLTAGE Revision: 05-Jun-13 -1 0 10 10 10 SQUARE PULSE t i (s) 10 1 10 100 1000 FREQUENCY IN MHz HF CHARACTERISTICS LCA0207 Document Number: 20135 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LCA.... www.vishay.com Vishay Draloric PERFORMANCE CHARACTERISTICS CONDITIONS OF TEST REQUIREMENTS (R/R) (1) 1000 h at 70 °C, 1.5 h ON, 0.5 h OFF 8000 h at 70 °C, 1.5. h ON, 0.5 h OFF ± 1.5 % ± 4.0 % 1000 h at 155 °C without load 8000 h at 155 °C without load ± 3.0 % ± 8.0 % Overload test IEC 60115-1, 4.13 2.5 x rated power or twice the limiting element voltage, 2 s for size 0207; 5 s for size 0414 ± 0.5 % Thermal shock IEC 60115-1, 4.19 Rapid change between upper and lower category temperature ± 0.25 % Dry heat, damp heat cyclic, cold, low air pressure ± 1.5 % 56 days; 40 °C; 90 % to 95 % RH; loaded with 0.01 P70 ± 1.5 % Resistance to soldering heat IEC 60115-1, 4.18 10 s at 260 °C solder bath temperature ± 0.25 % Robustness of terminations IEC 60115-1, 4.16 Tensile, bending and torsion ± 0.25 % Frequency 10 Hz to 500 Hz; displacement 1.5 mm or acceleration 10 g; three directions; 6 h ± 0.25 % TEST Endurance test at 70 °C IEC 60115-1, 4.25.1 Endurance at UCT IEC 60115-1, 4.25.3 Climatic sequence IEC 60115-1, 4.23 Damp heat steady state IEC 60115, 4.24 Vibration IEC 60115-1, 4.22 Note (1) For ohmic values between 10 and 1 M. APPLICABLE SPECIFICATIONS • CECC 40101-806 • EN 140100; EN 60115-1 Revision: 05-Jun-13 Document Number: 20135 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000