L-NS www.vishay.com Vishay Dale Thin Film Low Value (0.03 to 10 ) Thin Film Resistor, Surface Mount Chip FEATURES • Homogeneous nickel alloy film • No inductance for high-frequency applications • Alumina substrates for high power handling Available capability (2 W maximum power rating) • Pre-soldered or gold terminations Available • Epoxy bondable termination available • Sulfur resistant (per ASTM B809-95 humid vapor test) Available • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Actual Size 0805 With extremely low resistances and high power capabilities, Vishay’s proven and unique ultra-low value resistors can be used in your hybrid or surface-mount applications. These resistors are available with solderable or weldable terminations. Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TCR TOL. CONSTRUCTION Passivation 300 1.0 VALUE AND MINIMUM TOLERANCE Resistor Film Solder Coating Nickel Barrier High Purity Alumina Adhesion Layer VALUE () 0.1 0.25 0.5 1.0 2.0 10.0 < 0.1 MINIMUM TOLERANCE ± 2.0 % ± 1.0 % ± 1.0 % ± 1.0 % ± 1.0 % ± 1.0 % 20 % STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Nickel alloy 0.03 to 10 ± 300 ppm/°C 1 % to 20 % (value dependent) P x R -55 °C to +155 °C -55 °C to +155 °C < -35 dB (typical) - CONDITIONS -55 °C to +125 °C - COMPONENT RATINGS CASE SIZE (1) POWER RATING (mW) 0505 125 0508 400 0603 125 0612 500 0705 200 0805 200 1005 250 1020 1000 1206 330 1225 2000 1505 500 2010 1000 2512 2000 Notes • Resistor values beyond ranges shall be reviewed by the factory (1) 0705 and 0805 are the same (only use 0805 when ordering) Revision: 10-Mar-16 RESISTANCE RANGE () 0.05 to 5.0 0.03 to 2.0 0.10 to 5.0 0.05 to 2.5 0.10 to 6.0 0.10 to 6.0 0.15 to 10.0 0.03 to 3.0 0.10 to 10.0 0.03 to 2.6 0.25 to 10.0 0.17 to 10.0 0.18 to 10.0 Document Number: 60027 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 L-NS www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches and millimeters D W T L SIZE L CASE SIZE INCHES W T MILLIMETERS INCHES MILLIMETERS INCHES D MILLIMETERS MAX. INCHES MILLIMETERS + 0.010/- 0.005 + 0.25/- 0.13 ± 0.005 ± 0.13 + 0.010/- 0.005 + 0.25/- 0.13 0505 0.050 1.27 0.050 1.27 0.020 0.51 0.016 0.41 0508 0.047 1.19 0.081 2.06 0.020 0.51 0.015 0.38 0603 0.064 1.65 0.032 0.81 0.020 0.51 0.012 0.30 0612 0.063 1.60 0.126 3.20 0.020 0.51 0.015 0.38 0705 (1) 0.075 1.91 0.050 1.27 0.020 0.51 0.021 0.53 0805 (1) 0.075 1.91 0.050 1.27 0.020 0.51 0.021 0.53 1005 0.100 2.54 0.050 1.27 0.030 0.76 0.021 0.53 1020 0.100 2.54 0.200 5.08 0.030 0.76 0.015 0.38 1206 0.126 3.20 0.063 1.60 0.030 0.76 0.020 0.51 1225 0.126 3.20 0.252 5.59 0.020 0.51 0.020 0.51 1505 0.150 3.81 0.050 1.27 0.030 0.76 0.021 0.53 2010 0.200 5.08 0.100 2.54 0.030 0.76 0.019 0.48 2512 0.250 6.35 0.125 3.18 0.030 0.76 0.019 0.48 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) MECHANICAL SPECIFICATIONS Resistive Element Nickel alloy Substrate Material Alumina Terminals Pre-soldered or gold Lead (Pb)-free Option 96.5 % Sn, 3.0 % Ag, 0.5 % Cu Tin/Lead Option Sn63 Lead (Pb)-free Finish and Tin/Lead Hot solder dip DERATING CURVE LIMITS (1) R ± % TYPICAL 1 R ± % STO (2) 0.5 - 0.19 LTO 0.1 - 0.03 RSH 0.5 - 0.14 Moisture 0.5 0.07 HTE 1.0 0.02 Load Life (2000 h at +70 °C) 0.5 0.20 ± 300 + 150 ENVIRONMENTAL TEST TCR (ppm) Notes (1) 0.01 additional allowed for measurement error (2) Testing conducted at 2.0 x working voltage on 2512 case size all other 2.5 x Revision: 10-Mar-16 100 Precent of Rated Power ENVIRONMENTAL TESTS 80 60 40 20 0 0 70 125 155 Ambient Temperature °C Document Number: 60027 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 L-NS www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: L-1206M1R00GBT1 L - 1 2 0 6 M 1 GLOBAL MODEL CASE SIZE TCR CHARACTERISTICS OHMIC VALUE L- = Low value wraparound chip resistor 0505 0508 0603 0612 0805 (1) 1005 1020 1206 1225 1505 2010 2512 M = 300 ppm/°C N = 350 ppm/°C O = 400 ppm/°C P = 500 ppm/°C First 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. Example: R100 = 0.1 1R60 = 1.6 R 0 0 G B T 1 TOLERANCE TERMINATION PACKAGING F = 1 % G = 2 % H = 3 % J = 5 % K = 10 % L = 20 % B = Wraparound Sn/Pb solder 63 % Sn/37 % Pb w/ nickel barrier G = Wraparound Au over Ni (gold) termination epoxy bondable RoHS compliant - e4 W = Top side wire bondable Au (gold) RoHS compliant - e4 S = Wraparound lead (Pb)-free solder 96.5 % Sn/3.0 % Ag/ 0.5 % Cu RoHS compliant - e1 BULK BS = 100 min., 1 mult WAFFLE WS =100 min., 1 mult WI = 100 min., 1 mult (item single lot date code) TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (1) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TI = 100 min., 1 mult (item single lot date code) TP = 100 min., 1 mult (package unit single lot date code) TS = 100 min., 1 mult Historical Part Number Example: L1206M1R00HBT (for reference purposes only) L 1206 M 1R00 H B T STYLE CASE SIZE TCR CHARACTERISTICS OHMIC VALUE TOLERANCE TERMINATION PACKAGING Note (1) Preferred packaging code Revision: 10-Mar-16 Document Number: 60027 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000