M www.vishay.com Vishay Dale Thin Film High Reliability Thick Film Resistor, Surface Mount Chip FEATURES Actual Size 0502 Utilizing proven expertise in thick and thin film resistors to satisfy your manufacturing needs, Vishay provides a high rel chip with the same reliability and stability found in military grade resistors. These chips are available in the widest range of sizes, values, and performance characteristics. And manufactured on the Mil-PRF-55342 qualified controlled production line. All product is 100 % electrical tested for tolerance and after thermal shock testing and typically meet the requirements of group A in MIL-PRF-55342 performance. Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. CONSTRUCTION Resistor • High purity alumina substrate for high power dissipation (2 W max.) • Wraparound terminations featuring a thin film Available adhesion layer covered with a leach resistant nickel barrier layer for +150 °C operating Available conditions • High speed laser trimming for high volume requirements Available • Ruthenium based cermet thick film for dependable performance Available • Fired-on glass passivation • Tape and reel packaging standard; static-free waffle pack available • Active trim and 0 chips • Sulfur resistant (per ASTM B809-95 humid vapor test) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Overglaze TYPICAL PERFORMANCE ABSOLUTE Alumina Substrate Inner Electrode Plated Solder Nickel Barrier TCR 100 TOL. 1 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Ruthenium 10 to 25 M ± 100 ppm/°C to ± 300 ppm/°C ± 1 % to ± 10 % R ± 0.15 % 25 V to 200 V -55 °C to +155 °C -55 °C to +155 °C < -35 dB (typical) - CONDITIONS -55 °C to +125 °C - COMPONENT RATINGS CASE SIZE (1) POWER RATING (mW) 0402 100 0502 100 0504 125 0505 125 0603 150 0705 200 0805 200 1005 250 1010 500 1206 330 1505 350 2010 1000 2208 750 2512 2000 Notes • Consult factory for nominals above 25 M (1) 0705 and 0805 are the same (only use 0805 when ordering) Revision: 11-Feb-16 WORKING VOLTAGE (V) 25 25 40 40 40 50 50 75 75 100 100 175 150 200 RESISTANCE RANGE () 10 to 10M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M Document Number: 60031 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 M www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D W T E L CASE SIZE TERM L W T D E 0402 B 0.042 ± 0.006 0.022 ± 0.005 0.010 to 0.033 0.010 ± 0.005 0.010 ± 0.005 0502 B 0.055 ± 0.005 0.025 ± 0.005 0.020 max. 0.010 ± 0.005 0.015 ± 0.005 0504 B 0.055 ± 0.005 0.040 ± 0.005 0.020 ± 0.005 0.010 ± 0.005 0.010 ± 0.005 0505 B 0.055 ± 0.006 0.050 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005 0603 B 0.064 ± 0.006 0.032 ± 0.005 0.010 to 0.033 0.012 ± 0.005 0.015 ± 0.005 0705, 0805 (1) B 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005 1005 B 0.105 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 1010 B 0.105 ± 0.007 0.100 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005 1206 B 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010 1505 B 0.155 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 2010 B 0.197 ± 0.006 0.098 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005 2208 B 0.230 ± 0.007 0.075 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005 2512 B 0.250 ± 0.006 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) ENVIRONMENTAL TESTS 10 R ± (%) 100 k R ± (%) Thermal Shock 0.02 0.03 Short Term Overload 0.02 0.02 Low Temperature Operation 0.03 0.04 Resistance to Solder Heat 0.06 0.02 Moisture Resistance 0.10 0.08 High Temperature Exposure 0.02 0.02 ENVIRONMENTAL TEST DERATING CURVE Precent of Rated Power 100 80 60 40 20 0 0 70 125 155 Ambient Temperature °C Revision: 11-Feb-16 Document Number: 60031 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 M www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M-1206K5001GBT1 M - 1 2 0 6 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC M- = High rel cermet thick film wraparound 0402 0502 0504 0505 0603 0805 1005 1010 1206 1505 2010 2208 2512 K = 100 ppm/°C M = 300 ppm/°C X = 0 jumper K 5 0 0 1 G B T 1 RESISTANCE TOLERANCE TERMINATION PACKAGING First 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. Example: 10R0 = 10 1002 = 10 k F = 1 % G = 2 % J = 5 % K = 10 % N = Not trimmed B = Wraparound nickel barrier with plated tin/lead solder S = Wraparound nickel barrier with plated matte tin lead (pb)-free solder G = Epoxy bondable BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (1) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TP = 100 min., 1 mult (package unit single lot date code) TS = 100 min., 1 mult Historical Part Number example: M0505K1003JBT (for reference purposes only) M 0505 K 1003 J B T STYLE CASE SIZE TCR CHARACTERISTIC OHMIC VALUE TOLERANCE TERMINATION PACKAGING Note (1) Preferred packaging code Revision: 11-Feb-16 Document Number: 60031 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000