HPS Datasheet

HPS
www.vishay.com
Vishay Sfernice
High Ohmic Value (up to 1.5 G), High Power Resistors
(up to 10 W at 25 °C) Thick Film
FEATURES
• RoHS for most values, please consult us
• High ohmic values up to 1.5 G
• Power rating up to 10 W at + 25 °C
• Molded or coated
• Ceramic core
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DIMENSIONS in millimeters
COATED
A
25 min.
ØE
25 min.
Ø a ± 0.02
ØB
SERIES
AND
STYLE
A
ØB
HPS58
6.5 ± 0.2
2.4 ± 0.1
WEIGHT
g
Ø E ± 0.1
FINISH
0.24
0.6
45° chamfer
max. 0.25 mm deep 4
4
L max.
HPS63
10 ± 0.2
3.7 ± 0.1
0.29
HPS68
15 ± 0.2
5.6 ± 0.3
0.67
HPS523
23 ± 2.3
5 ± 0.3
1.23
HPS923
23 ± 2.5
9 ± 0.5
HPS932
32 ± 2.5
9 ± 0.5
5.27
HPS947
47 ± 2.5
9 ± 0.5
7.18
molded
MOLDED
25 min.
25 min.
A
ØE
4.60
0.8
coated
ØB
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
RESISTANCE
RANGE

RATED POWER
P25 °C
W
LIMITING ELEMENT
VOLTAGE
V
TOLERANCE
±%
HPS58
200 to 100M
1
300
0.5, 1, 2, 5, 10
150
90K
HPS63
200 to 175M
2
700
0.5, 1, 2, 5, 10
150
245K
TEMPERATURE
CRITICAL
COEFFICIENT RESISTANCE
± ppm/°C
()
HPS68
300 to 400M
3
1500
0.5, 1, 2, 5, 10
150
750K
HPS523
800 to 650M
4
2000
0.5, 1, 2, 5, 10
150
1M
HPS923
1K to 1G
6
2500
0.5, 1, 2, 5, 10
150
1.041M
HPS932
1K to 1G
8
5000
0.5, 1, 2, 5, 10
150
3.125M
HPS947
2K to 1.5G
10
8000
0.5, 1, 2, 5, 10
150
6.4M
CLIMATIC
CATEGORY
- 55 °C/
+ 200 °C/
56 days
MARKING
GEKA trade-mark, series, style, nominal resistance (in ), tolerance (in %), letter P for TCR ± 150 ppm/°C, manufacturing date.
Because of lack of space, small styles are marked with ohmic value (in ), tolerance (in %) and letter P.
ORDERING INFORMATION
HPS
MODEL
Revision: 01-Aug-13
68
SIZE
50 M
OHMIC VALUE
10 %
150 ppm/°C
BL20
e1
TOLERANCE
TEMPERATURE
COEFFICIENT
PACKAGING
LEAD (Pb)-FREE
Document Number: 52015
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HPS
www.vishay.com
Vishay Sfernice
GLOBAL PART NUMBER INFORMATION
H
P
S
0
0
6
8
5
0
0
GLOBAL
MODEL
STYLE
OHMIC VALUE
TOLERANCE
HPS
HPS: 58 to 947
The first three digits are
significant figures and the
last digit specifies the
number of zeros to follow.
R designates decimal point.
1006 = 100 M
5104 = 5.1 M
3303 = 330 k
5005 = 50 M
...
D = 0.5 %
F=1%
G=2%
J=5%
K = 10 %
5
K
TEMPERATURE
COEFFICIENT
P = 150 ppm
K = 100 ppm
P
B
1
5
PACKAGING
SPECIAL
B15 = Blister
(20 pieces)
B19 = Blister
(30 pieces)
A18 = Ammopack
(400 pieces)
A20 = Ammopack
(500 pieces)
B17 = Blister
(25 pieces)
R10 = Reel
(500 pieces)
As applicable
As applicable
Revision: 01-Aug-13
Document Number: 52015
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000