Teccor® brand Thyristors EV Series 0.8 Amp Sensitive SCRs SxX8xSx Series Description New device series offers high static dv/dt and lower turn off (tq) sensitive SCR with its small die planar construction design. It is specifically designed for GFCI (Ground Fault Circuit Interrupter) and Gas Ignition applications. All SCRs junctions are glass-passivated to ensure long term reliability and parametric stability. Features t3P)4DPNQMJBOUBOE Halogen-Free t)JHIEWEUOPJTFJNNVOJUZ t*NQSPWFEUVSOPGGUJNFUq) < 25 μsec t5ISVIPMFBOETVSGBDF mount packages Symbol IT(RMS) VDRM / VRRM IGT t4FOTJUJWFHBUFGPSEJSFDU microprocessor interface t4VSHFDVSSFOU capability > 10Amps Main Features Value Unit 0.8 A 400 to 800 V 5 to 200 μA t#MPDLJOHWPMUBHF ( VDRM / VRRM ) capability - up to 800V Schematic Symbol A Applications The SxX8xSx EV series is specifically designed for GFCI (Ground Fault Circuit Interrupter) and gas ignition applications. G K Absolute Maximum Ratings Symbol IT(RMS) IT(AV) ITSM Parameter RMS on-state current (full sine wave) Average on-state current Non repetitive surge peak on-state current (Single cycle, TJ initial = 25°C) I2t I2t Value for fusing di/dt Critical rate of rise of on-state current IG = 10mA IGM Peak Gate Current Value Unit TO-92 TC = 55°C 0.8 A SOT-89 TC = 60°C 0.8 A SOT-223 TL = 60°C 0.8 A TO-92 TC = 55°C 0.51 A SOT-89 TC = 60°C 0.51 A SOT-223 TO-92 SOT-89 SOT-223 tp = 10 ms TL = 60°C 0.51 A F= 50Hz 8 A F= 60Hz 10 A F = 50 Hz 0.32 A2s tp = 8.3 ms TO-92 SOT-89 SOT-223 tp = 10 μs F = 60 Hz 0.41 A2s TJ = 125°C 50 A/μs TJ = 125°C 1.0 A PG(AV) Average gate power dissipation — TJ = 125°C 0.1 W Tstg Storage junction temperature range — — -40 to 150 °C TJ Operating junction temperature range — — -40 to 125 °C SxX8xSx Series 199 ©2013 Littelfuse, Inc Specifications are subject to change without notice. Revised: 09/23/13 Teccor® brand Thyristors EV Series 0.8 Amp Sensitive SCRs Electrical Characteristics (TJ = 25°C, unless otherwise specified) Value Symbol Description Test Conditions Limit DC Gate Trigger Current VD = 6V RL = 100 DC Gate Trigger Voltage VD = 6V RL = 100 MAX. 0.8 V Peak Reverse Gate Voltage IRG = 10μA MIN. 5 V Holding Current RGK = 1 KΩ Initial Current = 20mA MAX. 5 mA Critical Rate-of-Rise of Off-State Voltage TJ = 125°C VD = VDRM /VRRM Exp. Waveform RGK =1 k MIN. 75 V/μs Gate Non-Trigger Voltage VD = VDRM RGK =1 k TJ = 25°C MIN. 0.2 V tq Turn-Off Time TJ = 25°C @ 600 V RGK =1 k MAX. 30 25 25 μs tgt Turn-On Time IG=10mA PW = 15μsec IT = 1.6A(pk) TYP. 2.0 2.0 2.0 μs IGT VGT VGRM IH (dv/dt)s VGD Unit SxX8yS1 SxX8yS2 SxX8yS MIN. 0.5 1 15 μA MAX. 5 50 200 μA Note: x = voltage, y = package Static Characteristics (TJ = 25°C, unless otherwise specified) Symbol Description Test Conditions Limit Value Unit VTM Peak On-State Voltage ITM = 1.6A (pk) MAX. 1.70 V 3 μA Off-State Current, Peak Repetitive TJ = 25°C @ VD = VDRM RGK =1 k MAX. IDRM TJ = 125°C @ VD = VDRM RGK =1 k MAX. 500 μA Value Unit TO-92 75 °C/W SOT-223 30 °C/W SOT-89 50 °C/W TO-92 150 °C/W SOT-223 60 °C/W SOT-89 90 °C/W Thermal Resistances Symbol Rth(j-c) Rth(j-a) 1 Description Junction to case (AC) Junction to ambient Test Conditions IT = 0.8A IT = 0.8A 1 (RMS) 1 (RMS) 60Hz AC resistive load condition, 100% conduction. SxX8xSx Series 200 ©2013 Littelfuse, Inc Specifications are subject to change without notice. Revised: 09/23/13 Teccor® brand Thyristors EV Series 0.8 Amp Sensitive SCRs Figure 2: Normalized DC Holding Current vs. Junction Temperature 1.5 3.0 IH 4.0 1.0 IH (TJ = 25°C) 2.0 Ratio of IGT Ratio of IGT (TJ = 25°C) Figure 1: Normalized DC Gate Trigger Current For All Quadrants vs. Junction Temperature 0.5 0.0 2.0 1.0 0.0 -40 -15 +25 +65 +105 +125 -55 -35 Figure 3: Normalized DC Gate Trigger Voltage vs. Junction Temperature +5 +25 +45 +65 +85 +105 +125 Figure 4: Power Dissipation (Typical) vs. RMS On-State Current 1.0 Average On-state Power Dissipation [PD(AV)] - Watts 0.8 0.9 Gate Trigger Voltage (VGT) - V -15 Junction Temperature (TJ) - °C Junction Temperature (TJ) - °C 0.8 0.7 0.6 0.5 0.4 0.3 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180o 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.2 -40 -25 -10 +5 +20 +35 +50 +65 +80 +95 +110 0.0 +125 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 RMS On-state Current [IT(RMS)] - Amps Junction Temperature (TJ) - °C Figure 5: Maximum Allowable Case Temperature vs. On-State Current Maximum Allowable Case Temperature (TC) - oC 130 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180o CASE TEMPERATURE: Measured as shown on dimensional drawings 120 110 SOT-223 & SOT-89 100 90 TO-92 80 70 60 50 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 RMS On-state Current [IT(RMS)] - Amps SxX8xSx Series 201 ©2013 Littelfuse, Inc Specifications are subject to change without notice. Revised: 09/23/13 Teccor® brand Thyristors EV Series 0.8 Amp Sensitive SCRs Figure 6: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive) On-State Current (IT S M) – Amps . 20 Supply Frequency: 60Hz Sinusoidal Load: Resistive RMS On-State Current [IT(RMS)]: Max Rated Value at Specific Case Temperature 10 9 8 7 6 Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. 5 4 3 0.8 AD evi 2 ces 1 1 2 3 4 5 6 7 8 9 10 20 30 40 60 80 100 200 300 400 600 1000 Surge Current Duration - Full Cycle Soldering Parameters - Temperature Min (Ts(min)) Pre Heat 1Co'SFFBTTFNCMZ 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) oTFDT Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) oTFDPOET Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) oTFDPOET Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C SxX8xSx Series tP TP Temperature Reflow Condition Ramp-up TL tL TS(max) Preheat Ramp-do Ramp-down TS(min) tS 25 time to peak temperature 202 Time ©2013 Littelfuse, Inc Specifications are subject to change without notice. Revised: 09/23/13 Teccor® brand Thyristors EV Series 0.8 Amp Sensitive SCRs Physical Specifications Terminal Finish Reliability/Environmental Tests Test 100% Matte Tin-plated. Specifications and Conditions AC Blocking MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 110°C for 1008 hours Temperature Cycling MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time Temperature/ Humidity EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity High Temp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-Temp Storage 1008 hours; -40°C Thermal Shock MIL-STD-750, M-1056 10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature Autoclave EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and 100% R/H Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E UL recognized epoxy meeting flammability classification 94V-0. Body Material Lead Material Copper Alloy Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Dimensions – TO-92 Dimension A SEATING PLANE C GATE ANODE G Millimeters Min Max Min Max A 0.175 0.205 4.450 5.200 B 0.170 0.210 4.320 5.330 C 0.500 D 0.135 TC MEASURING POINT B Inches 12.70 3.430 E 0.125 0.165 3.180 4.190 F 0.080 0.105 2.040 2.660 G 0.016 0.021 0.407 0.533 H 0.045 0.055 1.150 1.390 I 0.095 0.105 2.420 2.660 J 0.015 0.020 0.380 0.500 H CATHODE I D F J E F SxX8xSx Series 203 ©2013 Littelfuse, Inc Specifications are subject to change without notice. Revised: 09/23/13 Teccor® brand Thyristors EV Series 0.8 Amp Sensitive SCRs Dimensions – SOT-223 Anode Inches Millimeters Dimensions Gate Cathode Anode 3.3 (0.130”) 1.5 (0.059”) 1.2 (0.047”) 6.4 (0.252”) 2.3 (0.091”) (3x) 1.5 (0.059”) 4.6 (0.181”) Min Typ Max Min Typ Max A 0.248 0.256 0.264 6.30 6.50 6.70 B 0.130 0.138 0.146 3.30 3.50 3.70 C — — 0.071 — — 1.80 D 0.001 — 0.004 0.02 — 0.10 E 0.114 0.118 0.124 2.90 3.00 3.15 F 0.024 0.027 0.034 0.60 0.70 0.85 G — 0.090 — — 2.30 — H — 0.181 — — 4.60 — I 0.264 0.276 0.287 6.70 7.00 7.30 J 0.009 0.010 0.014 0.24 0.26 0.35 K 10° MAX Dimensions in Millimeters (Inches) Dimensions – SOT-89 A C Tc Measuring Point Anode J B D H E F Cathode Inches Gate G Pad Layout for SOT-89 (2.21) .087 (1.12) .044 (3.91) .154 (1.19) .047 (0.91) .036 (1.63) Dimensions(1.63) in Millimeters (Inches) .064 SxX8xSx Series Millimeters Dimension Anode Min Typ Max Min Typ Max A 0.173 — 0.181 4.40 — 4.60 B 0.090 — 0.102 2.29 — 2.60 C 0.055 — 0.063 1.40 — 1.60 D 0.155 — 0.167 3.94 — 4.25 E 0.035 — 0.047 0.89 — 1.20 F 0.056 — 0.062 1.42 — 1.57 G 0.115 — 0.121 2.92 — 3.07 H 0.014 — 0.017 0.35 — 0.44 I 0.014 — 0.019 0.36 — 0.48 J 0.064 — 0.072 1.62 — 1.83 .064 204 ©2013 Littelfuse, Inc Specifications are subject to change without notice. Revised: 09/23/13 Teccor® brand Thyristors EV Series 0.8 Amp Sensitive SCRs Product Selector Voltage Part Number Gate Sensitivity Package — 200 μA TO-92 X — 200 μA TO-92 — X 200 μA TO-92 — — 200 μA SOT-223 — X — 200 μA SOT-223 — — X 200 μA SOT-223 S4X8BS X — — 200 μA SOT-89 S6X8BS — X — 200 μA SOT-89 S4X8ES1 X — — 5 μA TO-92 S6X8ES1 — X — 5 μA TO-92 S8X8ES1 — — X 5 μA TO-92 S4X8TS1 X — — 5 μA SOT-223 S6X8TS1 — X — 5 μA SOT-223 S8X8TS1 — — X 5 μA SOT-223 S4X8ES2 X — — 50 μA TO-92 S6X8ES2 — X — 50 μA TO-92 S8X8ES2 — — X 50 μA TO-92 S4X8TS2 X — — 50 μA SOT-223 S6X8TS2 — X — 50 μA SOT-223 S8X8TS2 — — X 50 μA SOT-223 400V 600V 800V S4X8ES X — S6X8ES — S8X8ES — S4X8TS X S6X8TS S8X8TS Packing Options Part Number Marking Weight Packing Mode Base Quantity SxX8ESy SxX8ESy 0.170g Bulk 2500 SxX8ESyAP SxX8ESy 0.170g Ammo Pack 2000 SxX8ESyRP SxX8ESy 0.170g Tape & Reel 2000 SxX8TSyRP SxX8TSy 0.120g Tape & Reel 1000 SxX8BSRP xX8 0.053g Tape & Reel 1000 SxX8BSRP1 xX8 0.053g Tape & Reel 1000 Note: x = voltage, y = gate sensitivity SxX8xSx Series 205 ©2013 Littelfuse, Inc Specifications are subject to change without notice. Revised: 09/23/13 Teccor® brand Thyristors EV Series 0.8 Amp Sensitive SCRs TO-92 (3-lead) Reel Pack (RP) Radial Leaded Specifications Meets all EIA-468-C Standards 0.02 (0.5) 0.236 (6.0) 1.6 (41.0) 0.708 (18.0) 0.098 (2.5) MAX 1.26 (32.0) 0.354 (9.0) 0.5 (12.7) Anode Cathode 0.2 (5.08) Gate 0.1 (2.54) 0.157 DIA (4.0) 14.17(360.0) Flat up 1.97 (50.0) Dimensions are in inches (and millimeters). Direction of Feed TO-92 (3-lead) Ammo Pack (AP) Radial Leaded Specifications Meets all EIA-468-C Standards 0.236 (6.0) 1.62 (41.2) 0.708 (18.0) 0.02 (0.5) 0.098 (2.5) MAX 1.27 (32.2) 0.354 (9.0) 0.1 (2.54) 0.5 (12.7) 0.157 (4.0) DIA Anode Cathode 0.2 (5.08) Gate Flat down n Directio of Feed 25 Devices per fold 1.85 (47.0) 12.2 (310.0) 1.85 (47.0) Dimensions are in inches (and millimeters). 13.3 (338.0) SxX8xSx Series 206 ©2013 Littelfuse, Inc Specifications are subject to change without notice. Revised: 09/23/13 Teccor® brand Thyristors EV Series 0.8 Amp Sensitive SCRs SOT-89 Reel Pack (RP) Specifications 8 mm 4 mm Ø1.5 mm 2 mm ANODE 1.75 mm 12 mm 5.5 mm GATE ANODE CATHODE 180 mm 13 mm Abor Hole Diameter 13.4 mm DIRECTION OF FEED SOT-89 Reel Pack (RP1) Specifications Ф 1.5mm 4mm 8mm CATHODE 2mm ANODE 1.75mm 5.5mm 12mm ANODE GATE 180 mm 13 mm Abor Hole Diameter 13.4 mm DIRECTION OF FEED SxX8xSx Series 207 ©2013 Littelfuse, Inc Specifications are subject to change without notice. Revised: 09/23/13 Teccor® brand Thyristors EV Series 0.8 Amp Sensitive SCRs SOT-223 Reel Pack (RP) Specifications ∅1.5 mm 8 mm 4 mm 2 mm A 1.75 mm 5.5 mm 12 mm K A GATE 180 mm 13 mm Abor Hole Diameter 13.4 mm Part Numbering System Part Marking System S xX8 x xx xx SERIES S: SCR VOLTAGE 4: 400V 6: 600V 8: 800V CURRENT X8: 0.8A PACKING TYPE Blank: Bulk Pack RP: Reel Pack (TO-92) Embossed Carrier Pack (SOT-223) Embossed Carrier Pack (SOT-89) RP1: Embossed Carrier Pack (SOT-89) (alternate orientation) AP: Ammo Pack (TO-92) SOT89 SENSITIVITY & TYPE S1: 5μA Sensitive SCR S2: 50μA Sensitive SCR S: 200μA Sensitive SCR Line1 = Littelfuse Part Number Line2 = continuation…Littelfuse Part Number Y = Last Digit of Calendar Year M = Letter Month Code (A-L for Jan-Dec) L = Location Code DD = Calendar Date PACKAGE TYPE E: TO-92 T: SOT-223 B: SOT-89 SxX8xSx Series SOT223 TO-92 208 ©2013 Littelfuse, Inc Specifications are subject to change without notice. Revised: 09/23/13