REVISIONS REV. A PRODUCTION RELEASE B REVISED PER ECO 11340 Nominal Coil Voltage Part Number 12 Vdc 24 Vdc R401K-420852A R401K-480852A REVISIONS B B B B B SHEET NO. 1 2 3 4 5 APPROVALS DESCRIPTION DATE 11/11/2015 S. LYNCH 9/18/2015 MANUFACTURING R. GARCIA 9/21/2015 K.R. 11/11/15 S.L. SWITCH, SPDT, LATCHING SELF CUT-OFF, TTL SMA-FEMALE CONNECTORS, 26.5 GHz OPTICAL INDICATORS, 10 MIL CYCLE 07/20/15 G. WITTS 9/21/15 TECHNOLOGIES COMPANY ENGINEERING QUALITY APPROVED 4822 McGrath Street Ventura, CA. 93003-5641 PH: (805) 650-0260 FAX: (805) 650-1734 DRAWN SARA LEE DATE CODE IDENT. NO. 00471 SCALE NONE DWG. NO. R401K-4X0852A FINAL ASSY: 11024-272-V SHEET 1 OF 5 04-0004 REV. C 5/27/10 OUTLINE DRAWING: ACUATION MARKING 1 2 3 5 6 7 4 .50 12.7 1.34 34.0 .26 6.6 Dow-Key Microwave 00471 CORPORATION IDENTIFICATION MARKING 2X 2X .093 2.4 .170 4.3 J1 JC 1.74 [44.1] .120 3.0 .090 2.3 J2 .29 7.4 .440 11.2 3X SMA FEMALE CONNECTOR 1.190 30.2 .880 22.4 .440 11.2 .52 13.2 .670 17.0 .260 6.6 1.34 34.0 UNLESS OTHERWISE SPECIFIED TOLERANCES ARE: [ ] MILLIMETERS .XXX ±.010 .XX ±.030 CODE IDENT. NO. 00471 DWG. NO. REV. R401K-4X0852A B ANGLES: ±3° SCALE NONE FINAL ASSY: 11024-272-V SHEET 2 OF 5 04-0005 REV. C 5/27/10 SPECIFICATION: 1.0 RF CHARACTERISTICS: 1.1 1.2 1.3 1.4 1.5 1.6 1.7 FREQUENCY (GHz) VSWR (RATIO MAX) INSERTION LOSS (dB MAX) ISOLATION (dB MIN) HOT SWITCHING (WATTS CW) IMPEDANCE (NOMINAL) REPEATABILITY (MAX) DC - 4 4 - 12.4 12.4 - 20 1.15:1 1.25:1 1.35:1 0.42 0.56 0.69 85 76 67 2 2 2 50 OHMS 0.03 dB @ 25 C (DC - 26 GHz) 20 - 26.5 1.50:1 0.80 60 2 2.0 ACTUATION DATA: 2.1 NOMINAL OPERATING VOLTAGE VOLTAGE 12 11-14 24 20-32 2.2 SWITCHING TIME 2.3 OPERATING MODE CURRENT (TYP) @ NOMINAL VOLTAGE & 25 C 60 mA 30 mA 15mS MAX LATCHING SELF CUT-OFF 3.0 MECHANICAL: 3.1 3.2 3.3 3.4 CONTACT ARRANGEMENT RF CONTACTS WEIGHT DESIGN LIFE * SPDT BREAK BEFORE MAKE 1.45 oz (41 g) NOMINAL 10,000,000 CYCLES MINIMUM 4.0 ENVIRONMENTAL: 4.1 OPERATING TEMPERATURE 4.2 STORAGE TEMPERATURE 4.3 VIBRATION 4.3.1 SINUSOIDAL OPERATING 4.3.2 SINUSOIDAL SURVIVAL 4.3.3 RANDOM (OPERATING) 4.4 SHOCK 4.4.1 SURVIVAL 4.4.2 OPERATING 4.5 HUMIDITY (OPERATING) 4.6 ALTITUDE 4.6.1 OPERATING 4.6.2 SURVIVAL -25 C TO +75 C -55 C TO +85 C 7 g, 5-2000 Hz at 0.25 in p-p 20 g, 20-2000 Hz at 0.06 in. p-p 2.41 g (rms), 10 min/AXIS HALF SINE: 500 g at 0.5 mS 50 g at 6mS 15 TO 95% RELATIVE HUMIDITY (NON-CONDENSING) 15,000 FEET 50,000 FEET * DESIGN LIFE IS 10 MILLION CYCLES MINIMUM, WHEN DRIVEN AT VOLTAGES 20 < Vsupply < 28 VDC OR 11 < Vsupply < 14 VDC. DEPENDING ON SWITCH OPERATING VOLTAGE. DESIGN LIFE IS 2 MILLION CYCLES MINIMUM WHEN DRIVEN AT VOLTAGES 28 < Vsupply < 32 VDC. CODE IDENT. NO. 00471 SCALE NONE DWG. NO. REV. R401K-4X0852A FINAL ASSY: 11024-272-V B SHEET 3 OF 5 04-0005 REV. C 5/27/10 SCHEMATIC: INDICATOR 5 6 7 I1 CI I2 +VDC -COM (GND) LOGIC POS 1 LOGIC POS 2 1 2 3 4 SELF CUT-OFF/TTL CIRCUIT 1 C 2 SWITCH SHOWN WITH POSITION 1 SELECTED TTL DRIVE: - CONNECT GROUND TO -COM, PIN 2 - CONNECT SUPPLY VOLTAGE (+VDC) TO PIN 1 - SELECT (CLOSE) THE DESIRED RF PATH BY APPLYING LOGIC HI SIGNAL TO THE DESIRED POSITION AND LOGIC LO SIGNAL TO THE ALTERNATE POSITION RF PATH 1-C 2-C LOGIC TRUTH TABLE INDICATOR LOGIC PATH POS.1 CI - I1 1 CI - I2 0 LOGIC POS.2 0 1 LOGIC "1" = 2.4 - 5.5 Vdc LOGIC "0" = 0.0 - 0.8 Vdc CODE IDENT. NO. 00471 SCALE NONE DWG. NO. REV. R401K-4X0852A FINAL ASSY: 11024-272-V B SHEET 4 OF 5 04-0005 REV. C 5/27/10 IDENTIFICATION MARKING: XXYY XX - YEAR YY - MFG WEEK 3 DIGITS OR GREATER ACTUATION MARKING: NOMINAL VOLTAGE NOTE: LABEL SHALL BE BLACK BACKGROUND WITH WHITE MARKING NOTE: ALL WORDS, LETTERS, NUMBERS AND SYMBOLS SHALL BE LOCATED APPROXIMATELY AS SHOWN CODE IDENT. NO. 00471 SCALE NONE DWG. NO. REV. R401K-4X0852A FINAL ASSY: 11024-272-V B SHEET 5 OF 5 04-0005 REV. C 5/27/10