X

H4SVP1X
PERFORMANCE SERIES VGA VFAI LENS DAY/NIGHT H.264
RUGGED INDOOR/OUTDOOR MINIDOME IP CAMERA
Honeywell’s latest addition to the Performance Series of IP-based products, the H4SVP1X
is a VGA resolution, Day/Night rugged indoor/outdoor fixed minidome network camera
engineered to provide extremely crisp images at minimal bandwidth. The H4SVP1X
provides VGA (640 x 480) resolution at full frame rate. Progressive scan technology and 2D
edge enhancement provide outstanding clarity and definition. Digital Noise Reduction
results in significant storage savings without sacrificing image quality in low light. The ¼"
progressive scan CMOS sensor offers the latest in digital video surveillance technology with
accurate colour rendition under a wide variety of lighting conditions. The H4SVP1X also
supports the ONVIF specification for interoperability between network video products.
HD
The H4SVP1X integrates a camera and lens in an ultra compact, single piece, vandalresistant unit for fast and easy installation in any application. The camera is designed to be
surface mounted. Wall and pendant mount kits are also available.
A 3-D axis gimbal capable of 360° of pan, 180º of tilt and 360º of horizontal rotation
simplifies mechanical camera adjustment. The Vari-focal Auto Iris lens allows the field of
view to be adjusted to suit the scene requirements.
A powerful and intuitive web client allows fine tuning of the camera and the auto iris levels.
The H4SVP1X supports dual video streams and multiple compression formats with rates up
to 25 frames per second (30 fps for NTSC systems). The compression parameters for the
two video streams are independently configurable. The primary stream is dedicated to
H.264. The secondary stream can be configured for H.264 or MJPEG. The H4SVP1X
features analogue video out for aiming and focusing during setup.
With built-in low current Power over Ethernet (IEEE 802.3af), power is supplied to the
camera using standard network cabling, eliminating the need for a separate power supply
and associated wiring. In situations where PoE support does not exist, the unit can also be
powered directly from 24V AC.
Market Opportunities
The H4SVP1X is perfect for installations where excellent picture clarity at minimal bandwidth
is required, making it an ideal camera for retrofitting into existing DVR/NVR installations
without requiring additional storage. Its discreet, vandal-resistant, outdoor design is impact
resistant and offers maximum protection against dust, dirt, and water. This provides
optimum performance for both indoor and outdoor applications.
Key Benefits
• Outstanding image quality,
VGA (640 x 480) resolution
• ONVIF support
• Multiple browser support
• Includes advanced IP locator software
to make system setup easy
• 25 fps (30 fps NTSC) progressive scan
• Simultaneous dual video streams,
independently configurable, H.264
and/or H.264/MJPEG
• Day/Night, 3.3-12 mm VFAI lens
• Remote firmware updates
• Web server for remote setup of camera
video and network parameters
• Camera tamper detection
• Supports both dynamic and static IP
address assignment
• Choice of 24V AC or PoE IEEE 802.3af
power inputs
• Date/time stamp embedded into
video stream
• Rugged polycarbonate dome
• Selectable aspect ratios (4:3 or 16:9)
• Video motion detection
• NTP time synchronisation support
• Wall and pendant mount kits available
H4SVP1X
SPECIFICATIONS
Like all cameras in the Performance Series, the H4SVP1X network camera uses Honeywell technology for camera video motion
detection, tamper detection, remote firmware updating and for secure storage of all camera settings. Video motion detection
recognises object motion within the field of view; then a simple on-screen notification alerts the user. Camera tamper detection
notifies the user when a camera’s field of view is altered, blinded, or blurred. This ensures the video’s integrity and alerts the
customer to either a live event or a system problem that is causing disruption to the video stream. Honeywell’s technology also
allows users to remotely upload firmware to the camera. Setup is quick and easy and can be customised via a web client or from
an NVR or DVR. The built-in web server provides password-protected access to the camera’s video and network setup.
SYSTEM DIAGRAM
Hybrid DVR
Monitor
NETWORK
Analogue out
NVR
Keyboard
equIP® Series
Cameras
Performance Series
Cameras
Monitor
Monitor
H4SVP1X
SPECIFICATIONS
Environmental
Operational
Video Standard
PAL/NTSC
Temperature
Operating: -20°C to 50°C
Storage: -40°C to 70°C
Scanning
System
Progressive scan
Relative
Humidity
0% to 85%, non-condensing
Image Sensor
1/4" CMOS
Rating
IP66
Number of
Pixels
(H x V)
640 x 480
Minimum
Illumination
0.19 lux @ 50 IRE, F1.4,
0.08 lux @ 30 IRE, F1.4
Automatic Lens
Control
DC Iris Level 1-25
Video Output (Aux) 1.0 Vp-p @ 75 ohms
S/N Ratio
50 dB or more (AGC off)
Auto Gain
Control
Off/On, selectable (10-40 dB)
Automatic
Electronic
Shutter
1/50-1/24,500 sec (PAL)
1/60-1/24,500 sec (NTSC)
Lens Type
3.3-12 mm
Vari-focal Auto Iris, F1.4
White Balance
AWC, AWC Push, Manual
IP Specifications
Video
Compression
Dual stream H.264 and MJPEG
Primary Stream
Resolution
640 x 480 (4:3)
640 x 360 (16:9)
320 x 240 (4:3)
320 x 180 (16:9)
H.264 Bitrate
(Typical)*
0.84 Mbps
0.70 Mbps
0.32 Mbps
0.25 Mbps
Frame rate
PAL/NTSC
Up to 25/30 fps video in all resolutions
Video
Streaming
Dual streaming: H.264 and MJPEG.
Controllable frame rate and bandwidth.
Constant or variable bit rate
Security
Multiple user access levels with
password protection
Video Access
from Web
Browser
Full control of all camera settings
available to administrator
Frame
Rate
25/30
25/30
25/30
25/30
Storage/Day
(GB)
8.86
7.39
3.33
2.58
Electrical
Input Voltage
24V AC, PoE IEEE 802.3af
Input Range
17–28V AC
Surge
Suppression
1.5 kW transient
Power
Consumption
3.5 W (max) 24V AC
PoE: PD Type 1 Class 1
Mechanical
Dimensions
(W x H)
154.9 mm x 117.1 mm
Weight
1.3 kg camera only
Construction
Housing: Die cast Aluminium
Finish: Cool Grey Powder Coat
Dome: Polycarbonate
Connector
Video Output (AUX): 2-pin
Molex connector
Power Input: Removable screw block
Network: RJ45 connector
Minimum
Web
Browsing
Requirements
Pentium IV CPU 3.1 GHz or faster
1 GB RAM (32-bit) or 2 GB RAM (64-bit)
Windows XP® SP3, Windows 2003
Server R2 (32-bit), Windows 7 (32-/64bit), Windows Vista SP1, Windows 2008
R2 (64-bit), Internet Explorer 8 or 9
Mozilla Firefox® and Google Chrome
Installation and
Management
Maintenance
Honeywell IP Utility software identifies
the IP address, checks status of device,
firmware upgrades over HTTP
Supported
Protocols
HTTP, TCP, RTSP, RTP, UDP, ARP, DNS,
NTP, RTCP, FTP, ICMP, DHCP, Bonjour,
IGMP, SSH
Standards
ONVIF support
Regulatory
Emissions
FCC part 15B, CE (EN55022)
Immunity
CE (EN50130-4)
Safety
EU: EN60950-1
*Actual bitrate is scene and motion dependent.
H4SVP1X
SPECIFICATIONS
System Integration
Accessories
Open IP Integration
Housing and Mounts
ONVIF support and open API for software integration.
Refer to www.onvif.org for the ONVIF specification and
the Honeywell Open Technology Alliance
(www.honeywell.com/security/hota) to learn more about
our open and integrated solutions.
HD4CHIP-PK
Pendant Mount Bracket
HD4CHIP-WK
Wall Mount Bracket
H4SVP1X Dimensions
154.9 mm
52.0
mm
90.0
HD4CHIP-PK Pendant Mount
mm
117.5 mm
67.0 mm
46.0 mm
104.0
mm
HD4CHIP-WK Wall Mount
139.3 mm
118.0 mm
163.5 mm
117.1 mm
46.0 mm
67.0 mm
46.0 mm
156 mm
194.4 mm
Ordering
H4SVP1X
Network, Day/Night Rugged Fixed Minidome camera, 1/4" Progressive Scan, CMOS, VGA Resolution Camera, 3.3-12
mm VFAI, 24V AC or PoE IEEE 802.3af, H.264, PAL
NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications.
For additional information,
please visit www.honeywell.com/security/uk
Honeywell Security Group
Aston Fields Road
Whitehouse Industrial Estate
Runcorn
Cheshire
WA7 3DL
Tel: 08448 000 235
www.honeywell.com
HVS-H4SVP1X-02-UK(0613)DS-E
June 2013
© 2013 Honeywell International Inc.