148.5(W)mm x 210(H)mm reverse Weatherproof camera DAY& NIGHT IR front HB71S HB71B Series Series CAUTION ! Do not install the camera in extreme temperature conditions. Do use the camera under conditions where temperatures are within -10°C to 50°C. Especially be careful for ventilation under high temperature. ! Do not install the camera under unstable lighting conditions. Severe lighting change or flicker can cause the camera to work improperly. ! Do not disassemble the camera. There are no user-serviceable parts inside it. ! Do not drop the camera or subject to physical shock. It can cause malfunctions to occur. ! Never point the camera into strong light or the sun. It can damage CCD. ! Note If there is a bright spot light in the scene, smearing or blooming may occur. Confirm that the power supply provides sufficient power before connecting the camera 101.5 Dimensions (mm) 126.0 78.0 62.0 122.0 As surroundings darken, it switches automatically from color to black-and-white mode to enhance sensitivity. 150.0 CAUTION To reduce the risk of electric shock, do not remove the cover. Regulatory Notice Specifications Model Image Sensor Total Pixels No. S/N Ratio NTSC PAL 1/3 inch SONY Super HAD CCD 410K / 270K 470K / 320K More Than 48dB (AGC Off) Resolution Video Output 380 TV Lines 1.0 Vp-p (75 Ohms, Composite) Lens Fixed f=6mm Angle of View f=6mm: 54º Sync System Min. Illumination Shutter Speed AGC IR LED/SENSOR Rev 0 03/18 P/N: 3810-0054T White Balance LED Lighting Distance Input/Output Connector Power Consumption Weight Operation Manual Internal 0.00 Lux (IR LED On) 1/60 ~ 100,000 Sec. 1/50 ~ 100,000 Sec. Auto Auto Fixed (850nm/ 34EA) Fixed (30m/ Indoor) Power (Red Jack), Video Output (Yellow Jack) 12VDC (10V~15V), 0.4A/ 5W (Max) Approx. 800g This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference, in which case the user will be required to correct the interference at his own expense. WARNING - Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. CAUTION - When this camera is installed near equipment, like a wireless communication device that emits a strong electromagnetic field, some irregularity such as noise on the monitor screen may happen. Design and specifications are subject to change without notice. READ AND KEEP THIS OPERATION MANUAL Need Help? Call 1.800.796.CCTV for sales, service and customer support. www.honeywellvideo.com