TAS (CNS) www.vishay.com Vishay Sfernice Conformal Coating, Single-In-Line Thin Film Resistor, Through Hole Networks FEATURES • • • • • Actual Size These networks are designed to be used in analog circuits in conjunction with operational amplifiers. In addition to the standard models, Vishay also offers semi-custom or custom networks. Standard design - no NRE Low TCR (10 ppm/°C) Excellent TCR tracking (< 2 ppm/°C) Low noise (< - 35 dB) High stability (0.005 % on ratio, after 2000 h at Pn at + 70 °C) • Through hole SIL resistors networks • Evolution to SMD version see PRA datasheet (www.vishay.com/doc?53033) • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS MODEL RESISTANCE RANGE POWER RATING PER RESISTOR (1) W POWER RATING PER PACKAGE W ABSOLUTE TOLERANCE ±% RATIO TOLERANCE (2) ±% ABSOLUTE TCR (3) ± ppm/°C RATIO TCR (4) ppm/°C 1K to 9.9M 0.100 Varies with size 0.1 0.01, 0.02, 0.05 10, 15 2 TAS (CNS) Notes (1) at + 70 °C (2) ± 0.02 % or ± 0.01 % on request (3) ± 10 ppm/°C at 0 °C to 70 °C, 15 ppm/°C at - 40 °C to 125 °C (4) 1 ppm/°C on request PERFORMANCES TEST SPECIFICATIONS CONDITIONS Stability (R ratio) 0.005 % 2000 h at + 70 °C at Pn Voltage coefficient < 0.002 ppm/V Working voltage Noise Thermal EMF Shelf life stability 100 V - 35 dB typical 0.1 μV/°C 50 ppm maximum 1 year CLIMATIC SPECIFICATIONS Operating temperature range - 40 °C to + 125 °C Storage temperature range - 55 °C to + 125 °C MECHANICAL SPECIFICATIONS Resistive element Passivated nichrome Substrate material Alumina Body Terminals Marking resistance to solvents Revision: 28-Aug-13 Epoxy-conformal coating Tin/silver on Cu alloy Laser marking Document Number: 60040 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAS (CNS) www.vishay.com Vishay Sfernice DIMENSIONS A F B E D G C DIMENSION INCHES MILLIMETERS A (see table below) (see table below) B 0.261 6,62 max. C 0.020 0.51 D 0.1 2.54 E 0.125 3.17 min. F 0.100 2.54 max. G 0.010 0.25 MARKING Part Number Date Code PIN COUNT Pin #1 Amax. VISHAY Logo 3 4 5 6 7 8 9 10 inch 0.330 0.430 0.530 0.630 0.730 0.830 0.930 1.030 mm 8.38 10.92 13.46 16 18.54 21.08 23.62 26.16 SCHEMATIC TWO EQUAL RESISTORS R1 = R2 SMD version: see PRA datasheet R1 R2 2 1 Actual size 3 ORDERING INFORMATION R1 = 1 k TAS 209 50 k TAS 214 R1 = 2 k TAS 210 100 k TAS 215 R1 = 5 k TAS 211 200 k TAS 216 R1 = 10 k TAS 212 500 k TAS 217 R1 = 20 k TAS 213 1 M TAS 218 TWO EQUAL RESISTORS R1 = R2 SMD version: see PRA datasheet R1 R2 2 1 3 4 ORDERING INFORMATION R1 = 1 k TAS 365 R1 = 10 k TAS 363 R1 = 100 k TAS 348 Actual size FOUR EQUAL RESISTORS R1 SMD version: see PRA datasheet R1 1 R1 2 3 Revision: 28-Aug-13 R1 4 5 R1 6 7 8 Actual size ORDERING INFORMATION R1 = 1 k TAS 329 R1 = 5 k TAS 1002 R1 = 10 k TAS 158 R1 = 100 k TAS 288 Document Number: 60040 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAS (CNS) www.vishay.com Vishay Sfernice FOUR EQUAL RESISTORS, ONE COMMON R1 = R2 = R3 = R4 SMD version: see PRA datasheet R2 R1 1 2 R3 3 ORDERING INFORMATION R4 4 R1 = 10 k TAS 366 R1 = 100 k TAS 367 Actual size 5 RATIO DIVIDER 10:1 R1 + R2 = 10 kΩ, 100 kΩ, 1 MΩ R1 + R2 R2 SMD version: see PRA datasheet R2 R1 = 10 1 2 Actual size 3 ORDERING INFORMATION R1 + R2 = 9 k + 1 k = 10 k TAS 280 R1 + R2 = 90 k + 10 k = 100 k TAS 193 R1 + R2 = 900 k + 100 k = 1 M TAS 281 RATIO DIVIDER 10:1, 100:1 R1 + R2 + R3 = 100 kΩ and R2 + R3 = 10 kΩ R1 + R2 + R3 R3 R1 + R2 + R3 R2 + R3 SMD version: see PRA datasheet R1 + R2 + R3 = 100 k R3 R2 R1 = 100 = 10 ORDERING INFORMATION 2 1 3 4 Actual size TAS 330 with R1 = 90 k R2 = 9 k R3 = 1 k RATIO DIVIDER 100:1 R1 + R2 = 10 MΩ R1 + R2 R1 ORDERING INFORMATION R1 R1 + R2 = 10 M R2 = 100 1 2 Actual size 9 TAS 112 with R1 = 100 k R2 = 9.9 M EIGHT EQUAL RESISTORS, ONE COMMON R1 = R2 = R3 = R4 = R5 = R6 = R7 = R8 R1 1 3 2 R3 R2 4 R4 SMD version: see PRA datasheet R5 5 6 R6 R7 7 8 R8 9 ORDERING INFORMATION R1 = 10 k TAS 368 R1 = 100 k TAS 369 Actual size DIVIDER NETWORK 10:1 R2 R4 — = — = 10 R1 R3 R1 SMD version: see PRA datasheet ORDERING INFORMATION TAS 220 R2 R3 R4 with R1 = R2 = R2 = R4 = 1 2 3 4 5 6 10 k 100 k Actual size DIVIDER NETWORK 10:1 R1 R2 SMD version: see PRA datasheet = 10 R1 1 Revision: 28-Aug-13 R2 2 3 ORDERING INFORMATION R1 = 100 k, R2 = 10 k TAS 282 R1 = 1 M, R2 = 100 k TAS 283 Actual size Document Number: 60040 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAS (CNS) www.vishay.com Vishay Sfernice EIGHT RESISTORS NETWORK SMD version: see PRA datasheet 9 kΩ 10 kΩ 1 kΩ ORDERING INFORMATION 1 kΩ TAS 272 1 kΩ 1 1 kΩ 3 2 4 10 kΩ 9 kΩ 5 6 7 8 9 Actual size DIVIDER NETWORK 10:1 R1 — = 10 R2 SMD version: see PRA datasheet R1 1 R2 R2 2 3 4 ORDERING INFORMATION R1 5 6 R1 = 10 k, R2 = 1 k TAS 328 R1 = 100 k, R2 = 10 k TAS 284 R1 = 1 M, R2 = 100 k TAS 285 Actual size DIVIDER NETWORK 1:1 R1 = R2 R1 1 ORDERING INFORMATION SMD version: see PRA datasheet R2 2 R1 3 4 R2 5 6 Actual size R1 = 5 k TAS 225 R1 = 10 k TAS 286 R1 = 100 k TAS 219 R1 = 1 M TAS 287 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TAS214BW (preferred part number format) T A S 2 1 4 B W GLOBAL MODEL REFERENCE ABS. TOLERANCE RATIO TOLERANCE TAS (see list) B = 0.1 % W = 0.05 % P = 0.02 % Custom Network: CNS 1128 CNS 1128 GLOBAL MODEL REFERENCE Note • For custom specification a specific part number will be issued by Vishay Sfernice. E.g. CNS1128. Revision: 28-Aug-13 Document Number: 60040 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000