CHPHR www.vishay.com Vishay Sfernice ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips FEATURES • • • • • • SMD wraparound chip resistor Generic specification ESCC 4001 Detailed specification ESCC 4001/026 Robust terminations Large ohmic value range 1 to 10 M HCHP option 0.55: For high frequency applications (up to 10 GHz) • ESA ( ) qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Vishay Sfernice thick film chip resistors CHPHR are specially designed to meet the requirements of the ESA 4001/026 specification. They have undergone the CNES evaluation (Space French National Agency). They are in level 1 of the ESA EPPL (European Preferred Part List) and ESA qualification is on-going. Sputtered Thin Film terminations, with nickel barrier, are very convenient for high operating conditions. They can withstand thousands of very severe thermal shocks. B (W/A) type is for solder reflow assembly (variant 01 to 05) G (W/A) type is for gluing (variant 06 to 10) DIMENSIONS in millimeters A D D B C E E DIMENSIONS in millimeters VARIANT NUMBER STYLE A B C D E MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. 01, 06 0603 1.36 1.68 0.72 0.98 0.38 0.53 0.17 0.51 0.25 0.51 02, 07 0805 (1) 1.75 2.07 1.14 1.4 0.38 0.53 0.17 0.51 0.25 0.51 03, 08 1206 2.89 3.21 1.47 1.73 0.38 0.53 0.17 0.51 0.25 0.51 04, 09 2010 4.92 5.24 2.41 2.67 0.5 0.63 0.25 0.64 0.25 0.64 05, 10 2512 6.19 6.51 2.93 3.32 0.5 0.63 0.25 0.64 0.25 0.64 Note (1) Model CHPHR0805 being same size than case 0705 with same performances, only codification of CHPHR0805 remains. Substrate Alumina Technology Thick film (Ruthenium oxyde) Protection Epoxy coating Terminations B (W/A): SnPb over nickel barrier for solder reflow G (W/A) type: Gold over nickel barrier for gluing POWER DERATING CURVE Rated Power (%) MECHANICAL SPECIFICATIONS 100 80 60 40 20 CHIPS FOR HIGH FREQUENCY APPLICATIONS High frequency option available up to 10 GHz 3 sizes: 0603, 0805, 1206 Revision: 19-Nov-14 0 0 20 40 60 70 80 100 120 140 155 Ambient Temperature in °C Document Number: 52026 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CHPHR www.vishay.com Vishay Sfernice SUGGEESTED LAND PATTERN (please refer to IPC-7351A) Gmin. Xmax. Zmax. CHIP SIZE Zmax. Gmin. Xmax. 0603 2.38 0.34 0.98 0805 2.77 0.73 1.40 1206 3.91 1.87 1.73 2010 5.94 3.64 2.67 2512 7.21 4.91 3.32 TYPICAL HF PERFORMANCE OF HCHP PACKAGING 2.0 Waffle-pack or tape and reel when specified 1Ω 1.8 NUMBER OF PIECES PER PACKAGE 0603 MIN. 1206 140 1.2 5000 100 Ω 1.0 200 Ω 0.8 8 mm 4000 100 10 Ω 1.4 MAX. 100 0805 1.6 TAPE WIDTH TAPE AND REEL (1) |Z|/R WAFFLE PACK 2" x 2" SIZE 0.6 1 kΩ 0.4 2010 60 2512 45 2000 1 MΩ 0.2 8 mm 100 kΩ 10 kΩ 0 1 Note (2) MOQ for tape and reel: 50 pieces 10 100 1000 Size 0603 (W/A) 10 000 f (MHz) STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE CHPHR CHPHR CHPHR CHPHR CHPHR CHPHR CHPHR CHPHR CHPHR CHPHR 0603 0805 1206 2010 2512 0603 0805 1206 2010 2512 RESISTANCE RANGE (2) Rn 1 to 10M 1 to 10M 1 to 10M 1 to 10M 1 to 10M 1 to 10M 1 to 10M 1 to 10M 1 to 10M 1 to 10M POWER RATING (2) W TOLERANCE (3) ±% TEMPERATURE COEFFICIENT (3) (± 10-6/°C) CRITICAL RESISTANCE k TERMINAL MATERIAL AND FINISH 0.1 0.2 0.25 0.5 0.8 0.1 0.2 0.25 0.5 0.8 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 100, 200 100, 200 100, 200 100, 200 100, 200 100, 200 100, 200 100, 200 100, 200 100, 200 25 50 160 180 112.5 25 50 160 180 112.5 E4 E4 E4 E4 E4 E2 E2 E2 E2 E2 Notes (3) At T amb + 70 °C. For Tamb > + 70 °C derate linearly to 0 W at Tamb = + 155 °C (4) Restrictions might apply depending on ohmic value please refer to Table 1 TABLE 1 RESISTANCE () VALUE SERIES AVAILABLE TOLERANCE (± %) 1 Rn < 10 10 Rn < 1M Rn 1M Any value in the resistance range to 3 significant figures 2, 5 1, 2, 5 2, 5 Revision: 19-Nov-14 AVAILABLE TEMPERATURE COEFFICIENT (± 10-6/°C) 200 100, 200 200 Document Number: 52026 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CHPHR www.vishay.com Vishay Sfernice MAXIMUM RATINGS CHARACTERISTICS Limiting element voltage VARIANT NUMBER STYLE 01, 06 0603 50 02, 07 0805 100 03, 08 1206 04, 09 2010 300 05, 10 2512 300 All All 01, 06 0603 02, 07 0805 03, 08 1206 04, 09 2010 Rated voltage Isolation voltage SYMBOLS UL UR LIMITS 200 Pn x Rn 100 UNITS REMARKS V - V (1) V - Tamb 200 UI 300 300 05, 10 2512 Operating temperature range All All Top - 65 to + 155 °C Storage temperature range All All Tstg - 65 to + 155 °C - Soldering temperature All All Tsol + 260 °C (2) 01, 06 0603 0.002 02, 07 0805 0.004 03, 08 1206 0.008 g - 04, 09 2010 0.026 05, 10 2512 0.042 Maximum weight 300 Notes (1) Shall never exceed limiting element voltage. R = Rated resistance n (2) Duration 10 s maximum PERFORMANCE TEST Insulation resistance CONDITIONS LIMITS REQUIRED BY THE ESCC4001/026 SPECIFICATION ESCC4001 § 8.3.1.2 V = 100 V 1000 M Low temperature electrical measurement ESCC4001 § 8.3.1.1 TC = 100 ppm/°C TC = 200 ppm/°C High temperature electrical measurement ESCC4001 § 8.3.3 TC = 100 ppm/°C TC = 200 ppm/°C Rapid change of temperature Robustness of terminations ± 0.8 %± 1.6 % ± 1.36 %± 2.72 % ESCC4001 § 8.8 ± 0.25 + (0.05 x 100/Rn) % ESCC4001 § 8.11.2 ± 0.25 + (0.05 x 100/Rn) % Resistance to solder heat ESCC4001 § 8.12 ± 0.5 + (0.05 x 100/Rn) % Climatic sequence ESCC4001 § 8.10 ± 1 + (0.05 x 100/Rn) % Load life ESCC4001 § 8.13 1000 h 2000 h ± 1 + (0.05 x 100/Rn) % ± 1.5 + (0.05 x 100/Rn) % Revision: 19-Nov-14 Document Number: 52026 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CHPHR www.vishay.com Vishay Sfernice GLOBAL PART NUMBER INFORMATION LIMITED TO 18 DIGITS: If more digits are necessary a cofication of some digits might be necessary C H P H R 0 6 0 3 K 1 0 0 1 F B T GLOBAL MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING CHPHR 0603 0805 1206 2010 2512 K = 100 ppm L = 200 ppm The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. Example: 1R50 = 1.5 22R1 = 22.1 3901 = 3900 1004 = 1 M F=±1% G=±2% J=±5% B: SnPb over nickel barrier G: Gold For more information see Codification of Packaging table GLOBAL PART NUMBER INFORMATION ESA Part Numbering: 4001026011001F4 4 0 0 1 DETAILED SPECIFICATION NUMBER 0 2 6 0 1 1 0 0 1 VARIANT NUMBER RESISTANCE VALUE TOLERANCE 01 to 10 The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. Example: 1R50 = 1.5 22R1 = 22.1 3901 = 3900 1004 = 1 M F=±1% G=±2% J=±5% F 4 TEMPERATURE COEFFICIENT 4 = 100 ppm 6 = 200 ppm Note • MOQ for tape and reel: 50 pieces CROSS REFERENCE BETWEEN ESA PART NUMBER AND VISHAY PART NUMBER ESA PART NUMBER 4001026011001F4 VISHAY PART NUMBER CHPHR0603K1001FB EXPLANATIONS 4001026 = CHPHR 01 = 0603 with B terminations 1001 = 1001 (1 k) F=F (tol. 1 %) 4=K (TCR 100 ppm/°C) CROSS REFERENCE BETWEEN ESA PART NUMBER AND CHPHR PART NUMBER Revision: 19-Nov-14 VARIANT ESA VISHAY MODELS 01 CHPHR0603/B terminations 02 CHPHR0805/B terminations 03 CHPHR1206/B terminations 04 CHPHR2010/B terminations 05 CHPHR2512/B terminations 06 CHPHR0603/G terminations 07 CHPHR0805/G terminations 08 CHPHR1206/G terminations 09 CHPHR2010/G terminations 10 CHPHR2512/G terminations Document Number: 52026 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CHPHR www.vishay.com Vishay Sfernice HYPER FREQUENCY OPTION Hyper Frequency Option Numbering: HCHP0603K1001FBT55 H GLOBAL MODEL HCHP C H P 0 6 0 3 K 1 0 0 1 F B T 5 5 SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION 0603 0805 1206 K = 100 ppm L = 200 ppm The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. Example: 1R50 = 1.5 22R1 = 22.1 3901 = 3900 1004 = 1 M F=±1% G=±2% J=±5% B: SnPb over nickel barrier G: Gold Blank = Waffle pack T= Tape and reel 055 = HiRel production Note • MOQ for taping: 50 pieces CODIFICATION OF PACKAGING CODIFICATION OF SIZES WAFFLE PACK W 100 min., 1 mult WA 100 min., 100 mult (available only in size 1206) PLASTIC TAPE T 100 min., 1 mult TA 100 min., 100 mult TB 250 min., 250 mult TC 500 min., 500 mult TD 1000 min., 1000 mult TE 2500 min., 2500 mult TF Full tape (qunatity depending on size of chips) PAPER TAPE PT 100 min., 1 mult PA 100 min., 100 mult PB 250 min., 250 mult PC 500 min., 500 mult PD 1000 min., 1000 mult PE 2500 min., 2500 mult PF Full tape (quantity depending on size of chips) CODE 18 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z CODIFICATION OF OPTIONS ON TWO DIGITS OPTION .. 0099 0100 0101 0102 0103 0104 0105 .. 0124 0125 0126 0127 0128 .. 0320 0321 0322 0323 0324 0325 .. Revision: 19-Nov-14 OPTION 2 DIGITS .. 99 0A 0B 0C 0D 0E 0F .. 0Y 0Z 1A 1B 1C .. 8M 8N 8O 8P 8Q 8R .. CODE 40 02016 0302 0402 0502 0505 0603 0805 1005 1010 1020 1206 1505 2010 2208 2512 22 33 44 55 515 48 408 816 914 073 074 100 135 182 Document Number: 52026 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CHPHR www.vishay.com Vishay Sfernice TRACEABILITY DEFINITIONS The two major traceability elements are defined as: • The primary process lot number named Front End lot (FE lot). One “FE lot”is composed of several wafers issued from the same thin film deposition sequence. • The date code named Batch Number(BN). The “BN” is defined after completion of the end of production testing sequence. The lot homogeneity is given by the “FE lot” and not by the “BN”. According to the applied rules validated by the ESCC through the product qualification, the following situations are agreed: • Parts coming from different “FE lost” might have the same “BN”. • A maximum of two different “BN” might be applied to the same “FE lot” to enable the use of overruns from a previous PO. • Unless requested / approved by the customer the “BN” will be 2 years old maximum. SPECIFIC TRACEABILITY REQUIREMENTS The following specific requirements have to be treated as: • A customer who requires “Lot Homogeneity” has to mention it on the PO as “SINGLE PRODUCTION LOT”. • A customer who requires “Lot Homogeneity” in addition to a “Single Batch Number” has to mention it on the PO as “SINGLE PRODUCTION LOT AND OPTION R0101”. END OF PRODUCTION TESTING Mandatory testing performed at the end of the production process: • 100 % overload: Voltage 6.25 P n x R n or 2 UL whichever is less - duration 2 s • 100 % burn in: 168 h at Pn at 70 °C OPTIONS LOT VALIDATION TESTING For procurement of qualified components, lot validation testing is not required and shall only be performed if specifically stipulated in the purchase order. For procurement of unqualified components, lot validation testing shall be performed as stipulated in the purchase order. The need for lot validation testing shall be determined by the orderer. When lot validation testing is required, it shall consist of the performance of one or more of the tests or subgroup test sequences of chart F4 indicated in the ESA generic specification ESCC 4001. The testing to be performed and the sample size shall be as stipulated in the purchase order. When procurement of more than one component type is involved from a family, range or series, the selection of representative samples shall also be stipulated in the purchase order. Revision: 19-Nov-14 Lot validation testing will be composed of one LVT charges and LVT samples: Lot validation test charges has to be ordered separately on purchase order. Lot validation samples have to be ordered separately on purchase order. FINAL INSPECTION If requested by the orderer a final inspection can be performed on site. Final inspection has to be stipulated separately on purchase order. Document Number: 52026 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000