For more information, please visit the product page. date 09/22/2014 page 1 of 6 SERIES: PLDA25 │ DESCRIPTION: LED DRIVER FEATURES • • • • • • • • up to 25 W continuous power universal input range (90~305 Vac) single output dimming options: PWM, 1~10 Vdc power factor correction ≥ 0.9 constant current low profile for easy installation IP67 rated MODEL • over voltage, and continuous short circuit protection • UL 8750, IEC/EN61347-2-13 approval • EN61000-3-2 Class C (harmonic current) approval • efficiency up to 86% • suitable for LED lighting and signage applications output voltage range1 output current output power ripple and noise2 efficiency min (Vdc) max (Vdc) (mA) max (W) max (mVp-p) typ (%) PLDA25-530-277 9 48 530 25.44 480 86 PLDA25-700-277 9 36 700 25.2 360 84 PLDA25-1100-277 9 24 1100 26.4 240 86 Notes: 1. constant current region 2. ripple and noise are measured at 20MHz bandwidth with a 0.1uF ceramic capacitor and 10uF aluminum capacitor. PART NUMBER KEY PLDA25 - XXXX - 277XXX Base Number IP Rating “blank” = IP64 A = IP67 Output Current Dimming PE = PWM, 1~10 Vdc “blank” = no dimming Input Voltage 277 = (90~305 Vac) cui.com For more information, please visit the product page. CUI Inc │ SERIES: PLDA25 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 2 of 6 INPUT parameter conditions/description min voltage frequency current at 115 Vac, full load at 230 Vac, full load inrush current at 240 Vac, cold start, 25°C, after 100 μs leakage current at 277 Vac power factor correction at 115 Vac/230 Vac, 75~100% load at 277 Vac, 100% load max units 90 127 typ 305 420 Vac Vdc 47 63 Hz 0.3 0.14 A A 5 A 0.5 mA 1 W 0.9 0.9 no load power consumption OUTPUT parameter conditions/description max units current line regulation measured from high line to low line at full load min ±5 % current load regulation measured from min. to max. of constant current region ±5 % constant current accuracy at nominal input and full load ±5 switching frequency start-up time typ 60 at 90 Vac 0.5 temperature coefficient % kHz ±0.05 s %/°C PROTECTIONS parameter conditions/description over voltage protection TVS clamp short circuit protection hiccup mode, auto recovery min typ min typ max units max units 3,750 Vac SAFETY & COMPLIANCE parameter conditions/description isolation voltage input to output, for 1 minute isolation resistance input to output safety approvals UL8750, IEC/EN61347-1, IEC/EN61347-2-13, PSE EMI/EMC FCC Part 15 Class B/EN55015, EN61547, EN61000-4-(2,3,4,5,6), EN61000-3-2 Harmonic Class C, EN61000-3-3 MTBF as per MIL-HDBK-217F, at 25°C RoHS 2011/65/EU 100 MΩ 200,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature see derating curves storage temperature operating humidity non-condensing max units -40 70 °C -40 85 °C 95 % 3,000 m 20 operating altitude cui.com typ For more information, please visit the product page. CUI Inc │ SERIES: PLDA25 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 3 of 6 MECHANICAL parameter conditions/description dimensions 5.511 x 1.181 x 0.787 (140 x 30 x 20 mm) min typ max units inches weight 100 g MECHANICAL DRAWING MODELS WITHOUT DIMMING units: inches[mm] tolerance: ±0.02[±0.5] unless otherwise specified 6.300[160.00] 0.394 [10.00] Function Black ACL White ACN OUTPUT WIRE CONNECTIONS Function Red +Vo Black -Vo 0.393[10.00] 0.393[10.00] ACL Black ACN White Black -V0 Red +V0 UL 1015 18AWG 0.393[10.00] UL 1015 18AWG 7.087[180.00] 0.393[10.00] 7.874[200.00] 7.874[200.00] 8.268[210.00] 0.787 [20.00] Color 5.984[152.00] 5.511[140.00] 0.087 [2.20] Color 0.137 [3.50] INPUT WIRE CONNECTIONS 0.315[8.00] 0.866[22.00] 1.181 [30.00] MODELS WITH DIMMING units: inches[mm] tolerance: ±0.02[±0.5] unless otherwise specified INPUT WIRE CONNECTIONS ACN OUTPUT WIRE CONNECTIONS Color Function Red +Vo Black -Vo Blue D+ White D- 0.393[10.00] ACN ACL Black White INPUT UL 1015 18AWG 0.393[10.00] 7.874[200.00] 8.268[210.00] OUTPUT 0.394[10.00] 0.551[14.00] White 0.394[10.00] 0.394[10.00] 0.315[8.00] ACL 8.465[215.00] -Vo Black 18AWG 6.693[170.00] +Vo RED 18AWG 12.953[329.00] DIMMING Blue & White 22AWG (Optional) Blue D+ Red +Vo Black -Vo 0.787 [20.00] Black 0.394 [10.00] Function 0.137 [3.50] Color 5.984[152.00] 5.511[140.00] (Optional) White D- cui.com 1.181 [30.00] For more information, please visit the product page. CUI Inc │ SERIES: PLDA25 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 4 of 6 DERATING CURVES Temperature Derating Curve PF vs. Output Current 1.00 100 0.95 80 0.90 THD vs. Output Current 25% 60 9$& THD Safe operating area 0.85 PF Load (%) 20% 50 40 0.80 20 0.75 -40 -20 0 20 40 50 60 70 80 100 9$& 15% 9$& 10% 9$& 0.70 50% 60% Ambient Temperature (°C) 70% 80% 90% 100% Output Current 5% 50% 60% 70% 80% 90% 100% Output Current EFFICIENCY CURVES Efficiency vs. Output Current (PLDA25-530-277) Efficiency Efficiency 9 9 9 9 9 9 Output Current 9 Efficiency vs. Output Current (PLDA25-700-277) 9 9 9 9 9 9 Output Current Efficiency vs. Output Current (PLDA25-700-277, with dimming) Efficiency Efficiency 9 9 9 Output Current 9 Efficiency vs. Output Current (PLDA25-1100-277) 9 9 9 9 9 Output Current Efficiency vs. Output Current (PLDA25-1100-277, with dimming) Efficiency Efficiency 9 Efficiency vs. Output Current (PLDA25-530-277, with dimming) 9 9 9 Output Current 9 9 cui.com 9 Output Current 9 For more information, please visit the product page. CUI Inc │ SERIES: PLDA25 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 5 of 6 APPLICATION NOTES 1. Dimming Dimming should be controlled from the dimming controller with PWM or 1~10 Vdc. +Vo (RED) ACL (BLACK) AC LED DRIVER -Vo (BLACK) D+ (BLUE) ACN (WHITE) D(WHITE) Dimming Controller 1~10 Vdc Dimming Voltage 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V (open) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty Cycle 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% (open) Output Current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Output Current PWM Dimming (@ 1kHz, 10V) Note: 1. All specifications are measured at Ta=25°C, 115/230 Vac input voltage, and full load unless otherwise specified. cui.com For more information, please visit the product page. CUI Inc │ SERIES: PLDA25 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 6 of 6 REVISION HISTORY rev. 1.0 description date initial release 09/22/2014 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.