VSOR2000S1 www.vishay.com Vishay Dale Thin Film Molded, 50 mil Pitch, Dual In-Line Thin Film Resistor, Surface Mount Network FEATURES • • • • • • • Actual Size Rugged, molded case construction Reduces total assembly costs Saves board space Compatible with surface mounting equipment Uniform performance characteristics Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC 61249-2-21 definition TYPICAL PERFORMANCE V.35 termination network used to insure signal integrity between transmitter and receiver sections of V.35 protocol. ABSOLUTE TRACKING 100 10 ABSOLUTE RATIO 1, 2 0.5 TCR TOL. SCHEMATIC 20 19 50 18 16 17 50 50 Notes • Pad 7 does not exist • PIN 7 is an open circuit 1 51.5 3 50 125 124 2 13 14 50 125 51.5 15 51.5 4 51.5 11 50 125 124 5 12 6 51.5 8 51.5 124 9 10 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range TCR: Absolute TCR: Tracking Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio Revision: 20-Oct-11 SPECIFICATIONS Tantalum nitride 20 50 to 125 ± 100 ppm/°C ± 10 ppm/°C ± 1 %, ± 2 % 0.5 % 1.6 W - 55 °C to + 125 °C - 55 °C to + 150 °C - CONDITIONS - 55 °C to + 125 °C - 55 °C to + 125 °C ± 1 %: 51.5 and 124 ± 2 %: 50.0 and 125 - 55 °C to + 125 °C - Document Number: 60009 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSOR2000S1 www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in inches and millimeters B Part Number Date Code DIMENSION INCHES MILLIMETERS A 0.500 ± 0.010 12.7 ± 0.25 B (Ref.) 0.050 1.27 C (Ref.) 0.016 0.41 C E VSOR20 00S1 H F D 0.008 0.20 E (Typ.) 0.030 0.75 G PIN 1 A J 0.406 ± 0.005 10.31 ± 0.13 0.010 0.25 W 0.100 ± 0.005 1.54 ± 0.13 Substrate Material Silicon 100 Precent of Rated Power Tantalum nitride Molded epoxy Copper alloy Plating Tin lead solder Lead coplanarity 0.0005" Marking Resistance to Solvents 0.64 x 45° DERATING CURVE Resistive Material Terminals 7.44 ± 0.08 0.025 x 45° H MECHANICAL SPECIFICATIONS Body 0.293 ± 0.003 J (Ref.) W D F G Permanency testing per MIL-STD-202, method 215 80 60 40 20 0 100 % matte tin Plated Lead (Pb)-free 0 70 125 150 Ambient Temperature °C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VSOR2000S1T1 V S O R 2 0 0 0 S 1 T GLOBAL MODEL PACKAGING VSOR2000S1 TAPE AND REEL TF = Full reel 2500 F UF = TUBED Historical Part Number example: VSOR2000S1T/R (for reference purposes only) Revision: 20-Oct-11 VSOR 2000S1 T/R MODEL# VALUE PACKAGING Document Number: 60009 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000