VSSRC1284 www.vishay.com Vishay Dale Thin Film 25 mil Pitch Thin Film Surface Mount Resistor/Capacitor Network FEATURES • Rugged, molded case construction JEDEC MO-137AD • Reduces total assembly costs • Saves board space • Compatible with automatic surface mounting equipment • Uniform performance characteristics • Resistors and capacitors on a single chip • UL 94 V-0 flame resistant • Compliant to RoHS Directive 2002/95/EC • Halogen-free according to IEC 61249-2-21 definition TYPICAL PERFORMANCE Actual Size IEEE 1284 parallel port termination network RESISTOR CAPACITOR TCR TOLERANCE 200 10 TCC TOLERANCE 200 20 SCHEMATIC 20 19 R2 18 R2 R1 R2 R1 1 17 R2 R1 2 16 R2 R1 3 15 R2 R1 4 14 R2 R1 5 13 R2 R1 6 12 R2 R1 7 11 R1 8 9 10 STANDARD ELECTRICAL SPECIFICATIONS TEST Material SPECIFICATIONS CONDITIONS Tantalum nitride - 20 - Resistance Range 10 to 10 k - TCR: Absolute ± 200 ppm/°C - Pin/Lead Number TCR: Tracking - - ± 10 % (R1 and R2), ± 20 % (C) At 1 MHz and VRMS over + 10 °C to + 70 °C Power Rating: Resistor 100 mW - Power Rating: Package 1W - Stability: Ratio - - Operating Temperature Range - - Storage Temperature Range - - 27 pF to 220 pF Based on number of resistors > 2 kV MIL-STD-883, method 3015 25 V - Tolerance: Absolute Capacitance Range ESD Protection Breakdown Voltage Revision: 20-Oct-11 Document Number: 60077 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSSRC1284 www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches and millimeters MODEL VSSRC1284 DIMENSION B Part Number Date Code INCHES C VSSRC 1284 E H F Pin 1 MINIMUM MAXIMUM A 0.344 max. 8.74 max. B (ref.) 0.025 0.64 C (ref.) 0.010 0.25 D 0.006 0.15 E (typ.) 0.025 0.64 F 0.154 ± 0.003 3.85 ± 0.08 G 0.015 x 45° 0.38 x 45° H 0.236 ± 0.008 5.9 ± 0.20 G A J W D J (ref.) 0.010 0.25 W 0.064 ± 0.005 1.64 ± 0.13 Note • Mold flash not included in body dimensions IMPRINTING VSSRC1284-X Date code -X = Molded version number from table below Resistive Element Tantalum nitride Substrate Material Silicon Body Terminals Plating Lead Coplanarity Marking Resistance to Solvents Molded epoxy Copper alloy 100 % matte Sn 0.0005" DERATING CURVE Precent of Rated Power MECHANICAL SPECIFICATIONS 100 80 60 40 20 0 - 50 Permanency testing per MIL-STD-202, method 215 0 25 70 125 150 Ambient Temperature °C STANDARD VALUES AVAILABLE MODELS R1 ± 10 % () R2 ± 10 % () C ± 20 % (pF) VSSRC1284-1 2.2K 33 220 VSSRC1284-2 4.7K 33 180 VSSRC1284-3 1K 33 180 VSSRC1284-4 4.7K 10 180 VSSRC1284-5 4.7K 27 33 VSSRC1284-6 4.7K 270 33 VSSRC1284-7 10K 10 27 Revision: 20-Oct-11 Document Number: 60077 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSSRC1284 www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VSSRC1284-1TF V S S R C 1 2 GLOBAL MODEL VALUE VSSRC1284 -1 -2 -3 -4 -5 -6 -7 8 4 - 1 T F PACKAGING UF = TUBED TAPE AND REEL TF = Full reels Historical Part Number example: VSSRC1284-1T/R (for reference purposes only) VSSRC1284 -1 T/R MODEL VALUE PACKAGING Revision: 20-Oct-11 Document Number: 60077 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000