CLA, CLB www.vishay.com Vishay Electro-Films Wire Bondable Thin Film Resistor Arrays FEATURES • • • • • • Product may not be to scale The CLA and CLB resistor arrays are the hybrid equivalent to the eight resistor common connection and isolated networks available in sips or dips. The resistors are spaced on 0.010" centers resulting in minimal space requirements. These chips are manufactured using Vishay Electro-Films (EFI) sophisticated Thin Film equipment and manufacturing technology. The CLA and CLBs are 100 % electrically tested and visually inspected to MIL-STD-883. • • • • Wire bondable Up to 12 equal value resistors For case see Part Dimensions table Resistance range: 20 to 1 M Excellent TCR tracking Resistor material: Tantalum nitride, self-passivating Oxidized silicon substrate for good power dissipation Custom values and pad geometries available Moisture resistant Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS The CLA and CLB thin film resistor arrays are designed for hybrid packages requiring up to twelve resistors of the same resistance value and tolerance, as well as excellent TCR tracking. For such hybrids, they afford great savings in cost and space. TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES PARAMETER Total Resistance Range Standard Tolerances TCR VALUE 20 to 1M ± 0.1, ± 0.5 ± 25, ± 50, ± 100 UNIT % ppm/°C Tightest Standard Tolerance Available 0.5 % 0.1 % ± 25 ppm/°C ± 50 ppm/°C ± 100 ppm/°C 20 Ω 300 Ω 300 kΩ 500 kΩ 1 MΩ STANDARD ELECTRICAL SPECIFICATIONS PARAMETER TCR Tracking Spread Noise, MIL-STD-202, Method 308 100 to 250 k < 100 or > 251 k Moisture Resistance, MIL-STD-202, Method 106 Stability, 1000 h, +125 °C, 25 mW Absolute Ratio Operating Temperature Range Thermal Shock, MIL-STD-202 Method 107, Test Condition F High Temperature Exposure, ± 150 °C, 100 h Dielectric Voltage Breakdown Insulation Resistance Operating Voltage DC Power Rating at +70 °C (Derated to Zero at 175 °C) 5x Rated Power Short-Time Overload, +25 °C, 5 s Revision: 14-Apr-16 VALUE ±5 -35 typ. -20 typ. ± 0.5 max. R/R UNIT ppm/°C dB % ± 0.25 max. R/R ± 0.05 max. R/R -55 to +125 °C ± 0.1 max. R/R % ± 0.2 max. R/R 200 1012 min. 100 0.050 per resistor ± 0.1 % max. R/R % V V W % % Document Number: 61009 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CLA, CLB www.vishay.com Vishay Electro-Films DIMENSIONS in inches 0.090 0.007 0.090 0.004 0.060 0.004 0.054 0.054 0.060 0.004 0.004 0.0775 0.007 CLA 8 Cell CLB 8 Cell DIMENSIONS in inches # OF RES. 03 04 06 08 12 CLA 0.060 x 0.060 ± 0.003 0.050 x 0.060 ± 0.003 0.069 x 0.060 ± 0.002 0.090 x 0.060 ± 0.002 0.130 x 0.060 ± 0.003 CLB 0.060 x 0.060 ± 0.003 0.050 x 0.060 ± 0.003 0.069 x 0.060 ± 0.002 0.090 x 0.060 ± 0.002 0.130 x 0.060 ± 0.003 MECHANICAL SPECIFICATIONS PARAMETER Chip Size See Dimensions table above Chip Thickness 0.010" ± 0.002" (0.254 mm ± 0.05 mm) Chip Substrate Material Oxidized silicon, 10 kÅ minimum SiO2 Resistor Material Tantalum nitride, self-passivating Bonding Pads 0.004" x 0.007" (0.10 mm x 0.178 mm) CLA - 16 CLB - 9 Number of Top Pads Pad Material 10 kÅ minimum aluminum Backing None, lapped semiconductor silicon GLOBAL PART NUMBER INFORMATION Global Part Number: CLA0830000FFKANHWS Global Part Number Description: CLA 8 Res 3K 1 %, 100 ppm/°C, Al terminations, no back metal, class H WS C L A 0 8 MODEL TYPE RESISTORS RES. CL A= Isolated B= Bussed 03 04 05 06 07 08 09 10 11 12 First 4 digits are significant figures of resistance Revision: 14-Apr-16 3 0 RES. MULTIPLIER CODE B = 0.01 A = 0.1 0=1 1 = 10 2 = 100 3 = 1000 0 0 TOL. CODE 0 RATIO TOL. F F K TCR TERM. (ppm/°C) A N BACK METAL H VISUAL CLASS W S PACKAGING CODE B = 0.1 % B = 0.1 % E = ± 25 G = Au G = Au H = Class H WS = C = 0.25 % F = 1.0 % C = ± 50 A = Al N = None K = Class K Waffle pack, D = 0.5 % N = None K = ± 100 100 min, F = 1.0 % M = ± 250 1 mult G = 2.0 % J = 5.0 % K = 10.0 % Document Number: 61009 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000